• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.71-78
• /
• 2005

The purpose of FMECA is to identify parts and design whose damage can effect the mission performance and to improve the spacecraft design using these data. In consequence of this analysis, each failure mode which can be happened during operation and manufacturing period is identified, and their effects on mission performance are reviewed. In this technical report, the FMECA procedures and results for the satellite which is now under development are showed.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.4
• /
• pp.631-639
• /
• 2005

In this paper, we propose a constructive realization procedure for 2D systems which may lead to a Fornasini-Marchesini local state-space model with much lower order than the existing realization procedure given by Bisiacco et al. Nontrivial examples are illustrated and the conditions for minimal realization are also discussed.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.11C no.4
• /
• pp.113-119
• /
• 2001

This paper presents a model for a pin-to-cylinder discharge type ozonizer, which utilizes the superposition of surface discharge and corona discharge operation. By changing the gas flow rate, the discharge power and the number of SDO units, the characteristics of ozone concentration ( $O_{3con}$), ozone generation ( $O_{3g}$) and ozone yield ( $O_{3Y}$) were investigated. Using one SDO unit the maximum values of $O_{3con}$, $O_{3g}$ and $O_{3Y}$ were found as 8100[ppm], 1623[mg/h] and 213[g/kWh] respectively. With two SDO units the corresponding values were found as 12800[ppm], 2893[mg/h] and 248[g/kWh] respectively. Hence using two SDO units the efficiency was improved by 16[%].y 16[%].

• Wind and Structures
• /
• v.16 no.1
• /
• pp.25-46
• /
• 2013

This paper presents a boundary-layer wind tunnel (BLWT) study on the effect of variable dominant openings on steady and transient responses of wind-induced internal pressure in a low-rise building. The paper presents a parametric study focusing on differences and similarities between transient and steady-state responses, the effects of size and locations of dominant openings and vent openings, and the effects of wind angle of attack. In addition, the necessity of internal volume correction during sudden breaching, i.e., a transient response experiment was investigated. A comparison of the BLWT data with ASCE 7-2010, as well as with limited large-scale data obtained at a 'Wall of Wind' facility, is presented.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.217-220
• /
• 2007

본 논문에서는 이중 구조의 공동에서 작은 공동 내부에 존재하는 전자파원으로부터 방사되는 전자파를 내부 공동의 개구를 지나 외부 공동의 개구를 통해 방사될 때, 외부 공동의 개구 크기 변화에 따른 방사 전자파의 크기를 FDTD법으로 검토하고 있다. 외부 공동 개구의 크기는 최대 방사 전자파의 주파수를 결정하므로 개구의 크기를 조절하면 방사되는 전자파의 크기를 제어할 수 있음을 이론해석을 통하여 확인하고 있다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.3
• /
• pp.15-22
• /
• 2007

An automatic measurement system which collects experimental data at an unmanned station where the networking to the internet could not be accessed was developed. With a Robo-rail accessing to the unmanned station, wireless local networking between server PC at the Rob-rail and client PC at the unmanned station is possible within 30 m from an access point equipment located at the unmanned station. An algorithm for transferring the data file which is saved in the client PC at the unmanned station to the server PC in the Robo-rail was proposed. IEEE-1394 camera was used to collect the data at the client PC. An extracting program from the IEEE-1394 captured images to character data and number data was developed using image processing technique, which drastically reduces the size of data file comparing to that of the raw image file.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.394-395
• /
• 2008

본 논문에서는 ZigBee (IEEE 802.15.4b Low-Rate Wireless Personal Area Network; LR-WPAN) 915MHz 대역 수신기에 주파수 옵셋에 따른 성능을 알아보고 수신기 Correlator에 Multiple delay differential filter를 적용하여 주파수 옵셋의 영향을 최소화하는 방법을 제시한다. AWGN 환경에서 주파수 옵셋의 영향이 최대와 최소(ZigBee frequency tolerance) ${\pm}80ppm$, $0{\sim}73200Hz$)일 때의 환경에서 시뮬레이션을 통해 제안한 수신기의 성능을 검증한다.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.5
• /
• pp.681-688
• /
• 2012

This paper presents the application of Differential Evolution (DE) algorithm to obtain a solution for Bid Based Dynamic Economic Dispatch (BBDED) problem including the transmission losses and to maximize the social profit in a deregulated power system. The IEEE-30 bus test system with six generators, two customers and two trading periods are considered under various bidding strategies in a day-ahead electricity market. By matching the bids received from supplying and distributing entities, the Independent System Operator (ISO) maximize the social profit, (with the choices available). The simulation results of DE are compared with the results of Particle swarm optimization (PSO). The results demonstrate the potential of DE algorithm and show its effectiveness to solve BBDED.

• Journal of Power Electronics
• /
• v.12 no.4
• /
• pp.632-642
• /
• 2012

This paper presents a filter analysis of conducted Electro-Magnetic Interference (EMI) in switching power converters (SPC) based on noise impedances. The EMI characteristics of SPC can be analytically deduced from a circuit theoretical viewpoint. The analytical noise model is investigated to get a full understanding of the EMI mechanism. It is shown that with suitable and justified model, filters pertinent to EMI noise is investigated. The EMI noise is identified by time domain measurements associated with an isolated half-bridge ac-dc converter. Practical filters like LC filter, ${\pi}$ filter and complete EMI filters are investigated. The proposed analysis and results can provide a guideline for improving the effectiveness of filtering schemes in SPC. Experimental results are also included to verify the validity of the proposed method. The results obtained satisfy the Federal Communications Commission (FCC) class A and class B regulations.

• Journal of Aerospace System Engineering
• /
• v.9 no.2
• /
• pp.41-46
• /
• 2015

The various risk factors that affected schedule, costs and mission success, etc. in development of the satellite. This paper derives the considerable "Cost of Quality" factors in the satellite development phase through the survey of practical techniques in respect of measurement of quality cost in the commercial products manufacturing, and proposes mitigation strategy of quality cost using the approach that can be minimized it.