• 한국인터넷방송통신학회논문지
• /
• 제24권2호
• /
• pp.65-70
• /
• 2024

근래에 와서 유틸리티들을 무선으로 원격제어 하는 스마트 팩토리 무선 이동 통신 기술에 대한 연구가 활발히 진행되고 있다. Wi-SUN(Wireless Smart Utility Network) 얼라이언스에서는 EEE802.15.4g/e에 기반한 새로운 무선통신 표준화 규격으로 스마트팩토리와 같은 플랫폼 구축에 적합한 Wi-SUN 프로토콜 구조를 제시하였다. IEEE802.15.4e의 RIT(Receiver Initiated Transmission) 모드 MAC(Media Access Control)의 throughput 및 지연시간 측면의 성능을 분석하고 효율적 운용을 위한 고려 사항을 살펴본다. RIT 모드는 체크 인터벌이 길어질수록 지연시간과 throughput이 떨어짐을 볼 수 있다. 트래픽 부하가 커질수록 RIT 체크 인터벌을 짧게 운용하면 지연시간도 짧아지면서 throughput을 높일수 있음을 보였다. RIT 모드는 전력소모가 작은 장점을 가지고 있으면서 지연시간이나 throughput 측면에서 IEEE802.15.4와 CSL 모드 사이의 중립적 특징을 가지는 것을 볼 수 있었다.

• 항공우주기술
• /
• 제4권2호
• /
• pp.71-78
• /
• 2005

FMECA의 목적은 위성체의 설계 시에 임무 수행에 치명적인 영향을 줄 수 있는 부품이나 구성을 밝혀내어 이를 설계에 이용하기 위한 것이다. 이러한 분석을 통하여 위성체의 운용 또는 생산 중에 예상되는 모든 고장 형태(Failure Mode)를 확인하고, 해당 고장 형태의 임무에 대한 영향을 검토하여 이러한 고장 형태가 허용될 수 있는 것인지를 결정하고 이를 보완하기위한 설계 변경 또는 관리가 이루어지게 된다. 본 기술 논문에서는 현재 개발 중인 위성에 대하여 수행된 FMECA의 절차와 결과를 수록하였다.

• International Journal of Control, Automation, and Systems
• /
• 제3권4호
• /
• pp.631-639
• /
• 2005

In this paper, we propose a constructive realization procedure for 2D systems which may lead to a Fornasini-Marchesini local state-space model with much lower order than the existing realization procedure given by Bisiacco et al. Nontrivial examples are illustrated and the conditions for minimal realization are also discussed.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제11C권4호
• /
• pp.113-119
• /
• 2001

This paper presents a model for a pin-to-cylinder discharge type ozonizer, which utilizes the superposition of surface discharge and corona discharge operation. By changing the gas flow rate, the discharge power and the number of SDO units, the characteristics of ozone concentration ( $O_{3con}$), ozone generation ( $O_{3g}$) and ozone yield ( $O_{3Y}$) were investigated. Using one SDO unit the maximum values of $O_{3con}$, $O_{3g}$ and $O_{3Y}$ were found as 8100[ppm], 1623[mg/h] and 213[g/kWh] respectively. With two SDO units the corresponding values were found as 12800[ppm], 2893[mg/h] and 248[g/kWh] respectively. Hence using two SDO units the efficiency was improved by 16[%].y 16[%].

• Wind and Structures
• /
• 제16권1호
• /
• pp.25-46
• /
• 2013

This paper presents a boundary-layer wind tunnel (BLWT) study on the effect of variable dominant openings on steady and transient responses of wind-induced internal pressure in a low-rise building. The paper presents a parametric study focusing on differences and similarities between transient and steady-state responses, the effects of size and locations of dominant openings and vent openings, and the effects of wind angle of attack. In addition, the necessity of internal volume correction during sudden breaching, i.e., a transient response experiment was investigated. A comparison of the BLWT data with ASCE 7-2010, as well as with limited large-scale data obtained at a 'Wall of Wind' facility, is presented.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 추계학술대회 논문집
• /
• pp.217-220
• /
• 2007

본 논문에서는 이중 구조의 공동에서 작은 공동 내부에 존재하는 전자파원으로부터 방사되는 전자파를 내부 공동의 개구를 지나 외부 공동의 개구를 통해 방사될 때, 외부 공동의 개구 크기 변화에 따른 방사 전자파의 크기를 FDTD법으로 검토하고 있다. 외부 공동 개구의 크기는 최대 방사 전자파의 주파수를 결정하므로 개구의 크기를 조절하면 방사되는 전자파의 크기를 제어할 수 있음을 이론해석을 통하여 확인하고 있다.

• 한국공작기계학회논문집
• /
• 제16권3호
• /
• pp.15-22
• /
• 2007

An automatic measurement system which collects experimental data at an unmanned station where the networking to the internet could not be accessed was developed. With a Robo-rail accessing to the unmanned station, wireless local networking between server PC at the Rob-rail and client PC at the unmanned station is possible within 30 m from an access point equipment located at the unmanned station. An algorithm for transferring the data file which is saved in the client PC at the unmanned station to the server PC in the Robo-rail was proposed. IEEE-1394 camera was used to collect the data at the client PC. An extracting program from the IEEE-1394 captured images to character data and number data was developed using image processing technique, which drastically reduces the size of data file comparing to that of the raw image file.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 학술대회 논문집 정보 및 제어부문
• /
• pp.394-395
• /
• 2008

본 논문에서는 ZigBee (IEEE 802.15.4b Low-Rate Wireless Personal Area Network; LR-WPAN) 915MHz 대역 수신기에 주파수 옵셋에 따른 성능을 알아보고 수신기 Correlator에 Multiple delay differential filter를 적용하여 주파수 옵셋의 영향을 최소화하는 방법을 제시한다. AWGN 환경에서 주파수 옵셋의 영향이 최대와 최소(ZigBee frequency tolerance) ${\pm}80ppm$, $0{\sim}73200Hz$)일 때의 환경에서 시뮬레이션을 통해 제안한 수신기의 성능을 검증한다.

• Journal of Electrical Engineering and Technology
• /
• 제7권5호
• /
• pp.681-688
• /
• 2012

This paper presents the application of Differential Evolution (DE) algorithm to obtain a solution for Bid Based Dynamic Economic Dispatch (BBDED) problem including the transmission losses and to maximize the social profit in a deregulated power system. The IEEE-30 bus test system with six generators, two customers and two trading periods are considered under various bidding strategies in a day-ahead electricity market. By matching the bids received from supplying and distributing entities, the Independent System Operator (ISO) maximize the social profit, (with the choices available). The simulation results of DE are compared with the results of Particle swarm optimization (PSO). The results demonstrate the potential of DE algorithm and show its effectiveness to solve BBDED.

• Journal of Power Electronics
• /
• 제12권4호
• /
• pp.632-642
• /
• 2012

This paper presents a filter analysis of conducted Electro-Magnetic Interference (EMI) in switching power converters (SPC) based on noise impedances. The EMI characteristics of SPC can be analytically deduced from a circuit theoretical viewpoint. The analytical noise model is investigated to get a full understanding of the EMI mechanism. It is shown that with suitable and justified model, filters pertinent to EMI noise is investigated. The EMI noise is identified by time domain measurements associated with an isolated half-bridge ac-dc converter. Practical filters like LC filter, ${\pi}$ filter and complete EMI filters are investigated. The proposed analysis and results can provide a guideline for improving the effectiveness of filtering schemes in SPC. Experimental results are also included to verify the validity of the proposed method. The results obtained satisfy the Federal Communications Commission (FCC) class A and class B regulations.