• 한국해양환경ㆍ에너지학회지
• /
• 제16권4호
• /
• pp.248-254
• /
• 2013

IMO가 도입한 Energy Efficiency Design Index (EEDI)의 강제로 최근 관심이 증가되고 있는 상반회전 프로펠러(Contra-Rotating Propeller, CRP)의 단독 상태에서의 성능평가를 위한 보오텍스격자법(Vortex Lattice Method) 기반의 포텐셜 수치해법과 모형시험법을 확립하고 이를 특정 CRP에 적용하여 유용성을 검증하였다. 대상 CRP는 EEDI 개선을 목적으로 설계된 것으로 그 성능을 본 연구의 수치 및 실험 해석을 바탕으로 분석하였다. CRP의 설계점을 포함한 주 작동 영역에 대해 계산과 실험이 좋은 일치를 보임을 확인하였고, 본 연구를 통하여 제안된 기법은 향후 CRP 설계 및 성능해석에 유용하게 사용될 수 있으리라 생각된다.

• 한국해양공학회지
• /
• 제37권2호
• /
• pp.58-67
• /
• 2023

While extensive research is being conducted to reduce greenhouse gases in industrial fields, the International Maritime Organization (IMO) has implemented regulations to actively reduce CO₂ emissions from ships, such as energy efficiency design index (EEDI), energy efficiency existing ship index (EEXI), energy efficiency operational indicator (EEOI), and carbon intensity indicator (CII). These regulations play an important role for the design and operation of ships. However, the calculation of the index and indicator might be complex depending on the types and size of the ship. Here, to calculate the EEDI of two target vessels, first, the ships were set as Deadweight (DWT) 50K container and 300K very large crude-oil carrier (VLCC) considering the type and size of those ships along with the engine types and power. Equations and parameters from the marine pollution treaty (MARPOL) Annex VI, IMO marine environment protection committee (MEPC) resolution were used to estimate the EEDI and their changes. Technical measures were subsequently applied to satisfy the IMO regulations, such as reducing speed, energy saving devices (ESD), and onboard CO₂ capture system. Process simulation model using Aspen Plus v10 was developed for the onboard CO₂ capture system. The obtained results suggested that the fuel change from Marine diesel oil (MDO) to liquefied natural gas (LNG) was the most effective way to reduce EEDI, considering the limited supply of the alternative clean fuels. Decreasing ship speed was the next effective option to meet the regulation until Phase 4. In case of container, the attained EEDI while converting fuel from Diesel oil (DO) to LNG was reduced by 27.35%. With speed reduction, the EEDI was improved by 21.76% of the EEDI based on DO. Pertaining to VLCC, 27.31% and 22.10% improvements were observed, which were comparable to those for the container. However, for both vessels, additional measure is required to meet Phase 5, demanding the reduction of 70%. Therefore, onboard CO₂ capture system was designed for both KCS (Korea Research Institute of Ships & Ocean Engineering (KRISO) container ship) and KVLCC2 (KRISO VLCC) to meet the Phase 5 standard in the process simulation. The absorber column was designed with a diameter of 1.2-3.5 m and height of 11.3 m. The stripper column was 0.6-1.5 m in diameter and 8.8-9.6 m in height. The obtained results suggested that a combination of ESD, speed reduction, and fuel change was effective for reducing the EEDI; and onboard CO₂ capture system may be required for Phase 5.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권2호
• /
• pp.123-132
• /
• 2014

The maritime sector is advancing with dedicated endeavor to reduce greenhouse gas in addressing issues with regards to global warming. Since 01 January 2013, the International Maritime Organization (IMO) regulation mandatory requirement for Energy Efficiency Design Index (EEDI) has been in place and should be satisfied by newly-built ships of more than 400 gross tonnage and the Ship Energy Efficiency Management Plan (SEEMP) for all ships type. Therefore, compliance to this necessitates planning during the design stage whereas verification can be carried-out through an acceptable method during sea trial. The MEPC-approved 2013 guidance, ISO 15016 and ISO 19019 on EEDI serves the purpose for calculation and verification of attained EEDI value. Individual ships EEDI value should be lower than the required value set by these regulations. The key factors for EEDI verification are power and speed assessment and their synchronization. The shaft power can be measured by telemeter system using strain gage during sea trial. However, calibration of shaft power onboard condition is complicated. Hence, it relies only on proficient technology that operates within the permitted ISO allowance. On the other hand, the ship speed can be measured and calibrated by differential ground positioning system (DGPS). An actual test on a newly-built vessel was carried out to assess the correlation of power and speed. The Energy-efficiency Design Index or Operational Indicator Monitoring System (EDiMS) software developed by the Dynamics Laboratory-Mokpo Maritime University (DL-MMU) and Green Marine Equipment RIS Center (GMERC) of Mokpo Maritime University was utilized for this investigation. In addition, the software can continuously monitor air emission and is a useful tool for inventory and ship energy management plan. This paper introduces the synchronization and identification method between shaft power and ship speed for EEDI verification in accordance with the ISO guidance.

• 해양환경안전학회지
• /
• 제25권5호
• /
• pp.627-633
• /
• 2019

본 논문의 주 관심사항은 전산유체역학과 기존 모형시험 데이터를 활용하여 주어진 선박의 저항 및 추진성능을 추정하고 그 결과를 이용하여 에너지효율설계지표(Energy Efficiency Design Index, EEDI)를 평가하는 방법을 제시하는 것이다. 대상선박의 모형선 크기에서의 전 저항을 계산하기 위해 점성 유동 해석을 수행하였다. 유동계산은 STAR-CCM+를 사용하였으며 자유표면, 트림과 싱키지를 고려하였다. 점성 유동 해석 결과를 바탕으로 대상선박의 유효동력을 산정하였다. 준 추진효율 계수는 기 보유한 모형시험 데이터베이스를 이용한 추정식 및 유사선박의 시험자료를 활용하여 산정하였다. 최종적으로 EEDI 산정식에 대하여 유체동역학적 결과, 선박의 정보, 사용하는 연료에 대한 $CO_2$의 환산계수, 연료소모량 등을 바탕으로 일반화된 계산 프로그램을 작성하였다.

• 한국해양환경ㆍ에너지학회지
• /
• 제14권1호
• /
• pp.65-71
• /
• 2011

국제해사기구의 해양환경보호위원회에서 CO₂ 배출량 감축의 지구적 노력에 동참하기 위해 최근 선박에서 대기로 방출하는 CO₂의 양을 지수화 하고자 하는 논의가 활발히 진행중이다. 그 대표적인 지수로서 신조선 설계 건조시에 적용하는 에너지 효율지수(EEDI : Energy Efficiency Design Index for new ships)와 현재 또는 건조 후 항행시에 운항선에 적용되는 에너지 효율지표(EEOI : Energy Efficiency Operational Indicator), 그리고 운항선의 에너지 효율관리 계획(SEEMP : Ship Energy Efficiency Management Plan)등이다. 본 지수는 선박을 설계 건조시부터 각 선박당 CO₂의 배출값을 산정하고 운항시에도 CO₂배출을 개량하고 이를 감축하는 방안을 모색하도록 유도하는 조치가 될 것이다. 향후 3년내에 발효될 수 있는 임박한 CO₂선박 배출 규제를 조사 분석하고 향후 발전방향을 모색해 보고자 한다.

• Ocean Systems Engineering
• /
• 제4권2호
• /
• pp.117-136
• /
• 2014

The increased interest in the design of energy efficient ships post IMO regulation on enforcing EEDI has encouraged researchers to reevaluate the numerical methods in predicting important hull design parameters. The prediction of added resistance and stability of ships in the rough sea environment dictates selection of ship hulls. A 3D panel method based on Green function is developed for vessel motion prediction. The effects of parametric instability are also investigated using the Volterra series approach to model the hydrostatic variation due to ship motions. The added resistance is calculated using the near field pressure integration method.

• 선박안전
• /
• 통권27호
• /
• pp.15-24
• /
• 2009

최근 IMO에서는 온실가스 배출을 규제화 하고자 하는 동향이 있으며 조만간 선박에서 온실가스 배출의 규제가 실현될 것으로 예상된다. 선박에서 배출되는 온실가스는 CO$_2$가 대부분을 차지하고 있으며 세계경제상황에 따른 영향이 고려되지만 지속적으로 증가추세에 있는 CO$_2$를 감소시키기 위한 아국의 대처방안이 필요한 시점이다. 또한 향후 발효될 EEDI를 소개하고 결과적으로 GHG를 저감시키기 위한 방안인 선형개선, 폐열회수시스템, 친환경연료사용기관, SEMP 등에 관한 내용을 다루어 보았다. 이 보고서에서는 GHG를 비롯한 NOx, SOx 및 PM과 같은 유해배출물질을 Top Down방식으로 평가함으로써 선박에서 기인하는 대기오염물질 관련 국내정책 및 해운산업의 장기적인 발전전략에 유용하게 사용될 것으로 기대한다.

• 대한조선학회지
• /
• 제53권1호
• /
• pp.17-21
• /
• 2016

• 한국해양공학회지
• /
• 제29권6호
• /
• pp.418-426
• /
• 2015

Recently, shipping operators have been making efforts to reduce the fuel cost in various ways, such as trim optimization and bulb re-design. Furthermore, IMO restricts the hydro-dioxide emissions to the environment based on the EEDI (Energy Efficiency Design Index), EEOI (Energy Efficiency Operational Indicator), and SEEMP (Ship Energy Efficiency Management Plan). In particular, ship speed is one of the most important factors for calculating the EEDI, which is based on methods suggested by ITTC (International Towing Tank Conference) or ISO (International Standardization Organization). Many shipbuilding companies in Korea have carried out speed trials around the Korea Straits. However, the conditions for these speed trials have not been exactly the same as those for model tests. Therefore, a ship’s speed is corrected by measured environmental data such as the seawater temperature, density, wind, waves, swell, drift, and rudder angle to match the conditions of the model tests. In this study, fundamental research was performed to evaluate the ship resistance performance due to changes in the water temperature and salinity, comparing the ISO method and numerical simulation. A numerical simulation of a KCS (KRISO Container ship) with a free-surface was performed using the commercial software Star-CCM+ under three conditions that were assumed based on the water temperature and salinity data in the Korea Straits. In the simulation results, the resistance increased under low water temperature & high salinity conditions, and it decreased under high water temperature & low salinity conditions. In addition, the ISO method showed the same result as the simulation.

• 대한조선학회지
• /
• 제52권3호
• /
• pp.33-41
• /
• 2015