• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.213-216
• /
• 2006

As form a part of way to improve the durability of concrete placed on deleterious environments such as acidic rivers, sewage wastewater, and sewer system, the paper presented here is the results of experimental immersion test, and for the test solution, 4 types sulfuric acid solution was prepared. From the result of EDS analysis of cement paste at 180 days of immersion, the detected major chemical elements were Ca and S and they are assumed as composing elements of gypsum. A comparative study between prediction models from the Japanese Standard and the present study corresponding to $d=C\sqrt{t}$ and $d=\alpha{\cdot}t^n$ respectively accorded well with each other, as being 0.98 of determination coefficient.

• 한국세라믹학회지
• /
• 제34권11호
• /
• pp.1099-1106
• /
• 1997

In the present study, the effect of TiB2 addition on the sintering behavior of ZrB2 ceramics was studied with hot pressing under Ar atmosphere. Hot pressing experiments were carried out in graphite dies at the 1$700^{\circ}C$, 180$0^{\circ}C$ under Ar atmosphere. The sintering density increased with increasing TiB2 contents. With the addition of 10wt% TiB2 almost theoretical density could be achieved by hot-pressing at 180$0^{\circ}C$. Zr-Ti-Fe-B compound in liquid phase was observed from the EDS and WDS analysis. It was considered that sinterability was enhanced due to the mass transfer through liquid phase formed at the sintering temperature. In addition of TiB2, transition metal of groups IV, substitutional solid solution could be formed.

• 태양에너지
• /
• 제8권1호
• /
• pp.49-56
• /
• 1988

Thermally treated Korean ilmenite was characterized and used for water splitting to obtain hydrogen by photo-catalytic reaction. Experiments on specific surface area, X-ray diffraction and EDS showed that the formation of FeO, $Fe_2O_3$ and $TiO_2$ ilmenite crystal surface increased the specific surface area with maximum value, phase change of $TiO_2$ at $600^{\circ}C$ and hetrogeneity. The hydrogen evolved in caustic soda solution on these ilmenites indicated that there was a maximum yield point at about $600^{\circ}C$. This point was explained with the change of the surface area due to sintering of newly formed FeO, $Fe_2O_3$ and $TiO_2$, as well as crystal phase change of anatase to rutile at $600^{\circ}C$. Produced hydrogen increased also as the concentration of caustic soda, but become constant at the near 1N solution.

• 한국재료학회지
• /
• 제17권10호
• /
• pp.544-547
• /
• 2007

Human teeth were scratched by the abrasive paper, dropping in hydroxyapatite solution during 1, 2, 3, 4 months. We studied teeth surface change with SEM each months. After 1 months treatment the surface appeared the change. Because of the hydroxyapatite ion exchange mechanism. The scratched surface was recovered by the hydroxyapatite. The results of EDS showed that $Ca^{2+}$ ion and $PO_4^{3-}$ ion were removed from hydroxyapatite solution to scratched teeth surface.

• 한국수소및신에너지학회논문집
• /
• 제30권3호
• /
• pp.193-200
• /
• 2019

$RuO_2$, $PtO_2$, and various $(Ru,Pt)O_2$ colloidal solution were prepared using modified Watanabe method. Electrodes were manufactured by dipping of Ni mesh into the colloidal solution. Manufactured electrodes were characterized by XRD, SEM, and EDS. $(Ru,Pt)O_2$ electrodes showed $RuO_2$ crystal structure and high roughness. The hydrogen evolution reaction (HER) activities were evaluated by Linear Sweep Voltammetry. 1Ru2Pt electrode showed similar activity with commercial electrode, HER potentials are -0.9 V for both.

• 전기화학회지
• /
• 제2권3호
• /
• pp.117-122
• /
• 1999

본 연구에서는 알칼리 용액에서 알루미늄의 부식속도를 측정하면서, 합금원소, 알칼리도(KOH농도),용액온도, 그리고 용액에 첨가하는 부식 억제제의 종류와 그 농도 등이 미치는 영향에 대해 조사하였다. 알루미늄 제품에 따라서는 순도 $99\%$ 이상인 AA-1050의 부식속도가 가장 낮은 반면에 Mg나 Mn이 포함된 합금은 상대적으로 높게 측정되었다. KOH 수용액에 ZnO를 포화농도로 첨가하면 부식속도가 $50\%$ 이상 억제되는 효과가 나타났지만. ZnAc는 부식 억제제로서 역할하지 못하였다. 알칼리도와 용액온도가 높을수록 ZnO의 부식 억제효과는 상승하였다 부식속도는 KOH농도에 대해 1차 선형 증가함수 그리고 온도 역수에 대해 지수형 감소함수로 나타났다. SEM과 EDS를 사용하여 부식 표면에 부착된 물질의 성분을 분석하였으며, XRD의 기기분석을 통하여 KOH 용액에서의 알루미늄의 부식 생성물이 $Al(OH)_3$임을 확인하였다.

• 한국세라믹학회지
• /
• 제48권3호
• /
• pp.222-227
• /
• 2011

The hexavalent chromium ions in wastewater are highly toxic chemicals even at low concentrations. It causes serious diseases, such as cancer, skin disease, digestive trouble et. al. In this study, $Cr^{6+}$ ions were removed by using borosilicate glasses. Various glasses system with different compositions were prepared and then reacted in a solution contaning $Cr^{6+}$ ions. After the reaction, the concentration of the $Cr^{6+}$ ions remained in the solution was measured by ICP-OES. The reacted surface of the glasses was also analyzed by using a XRD, SEM, and EDS. When $Na_2O-RO-SiO_2-B_2O_3$ (RO=MgO, CaO, SrO, BaO) glasses were reacted with a solution containing $Cr^{6+}$ ions, the optimum removal efficiency of $Cr^{6+}$ ions was observed in the BaO glass. $Ba^{2+}$ ions leached out of these glasses combine with $Cr^{6+}$ ions in a solution to form $BaCrO_4$ crystals on the glass surface. In this manner, the $Cr^{6+}$ ions can be removed from the solution. It is conceivable that $Ba^{2+}$ ions are reacted with $Cr^{6+}$ ions in a solution immedeately after leaching out of the glasses. The pH of the solution for optimum removal of $Cr^{6+}$ ions were 3.0~5.0.

• 열처리공학회지
• /
• 제31권5호
• /
• pp.220-230
• /
• 2018

The objective of this study is to investigate the effect of solution treatment on the microstructure and corrosion behavior of cast AZ91-4%RE magnesium alloy. In the as-cast state, microstructure of the AZ91-4%RE alloy was characterized by intermetallic ${\beta}(Mg_{17}Al_{12})$, $Al_{11}RE_3$ and $Al_2RE$ phase particles distributed in ${\alpha}-(Mg)$ matrix. After solution treatment, the ${\beta}$ particles with low melting point dissolved into the matrix, but Al-RE phases still remained due to their high thermal stabilities. It was found from the immersion and potentiodynamic polarization tests that corrosion rate of the AZ91-4%RE alloy increased after the solution treatment. On the contrary, EIS tests and EDS compositional analyses on the surface corrosion products indicated that the stability of the corrosion product was improved after the solution treatment. Examinations on the corroded microstructures for the ascast and solution-treated samples revealed that dissolution of the ${\beta}$ particles which play a beneficial role in suppressing corrosion propagation, would be responsible for the deterioration of corrosion resistance after the solution treatment. This result implies that the microstructural features such as amount, size and distribution of secondary phases that determine corrosion mechanism, are more influential on the corrosion rate in comparison with the stability of surface corrosion product.

• Korean Chemical Engineering Research
• /
• 제49권5호
• /
• pp.577-581
• /
• 2011

가시광 영역에서 강한 광루미네선스(photoluminescence, PL) 특성이 있는 실리콘 나노입자는, 생물학적 형광 이미징, RGB(red, green, blue) 디스플레이, 포토닉스, 광전소자 등의 응용소재로 개발될 수 있어 많은 연구가 수행되고 있다. 실리콘 나노입자의 광학적 및 물리화학적 특성을 이용한 실용적인 응용 및 개발을 위해서는 그 특성의 조절이 용이한 제조법 개발이 필수적이다. 본 연구에서는 Na(naphthalide)를 환원제로 사용한 용액환원법을 이용하여 한 단계로 입자표면이 알킬기로 안정화된 평균 <10 nm 크기의 실리콘 나노입자를 합성할 수 있는 방안을 시도하였다. 이를 위하여 실리콘 전구체로 알킬기를 포함하고 있는 (Octyl)$SiCl_3$ 단독 또는 (Octyl)$SiCl_3$와 $SiCl_4$의 혼합물을 사용하여 Si-Cl 결합의 환원을 통한 입자의 형성과 동시에 반응물에 포함된 Octyl 기에 의한 표면 안정화를 한번에 달성할 수 있었다. 합성한 실리콘 입자의 TEM/EDS, FTIR 분석결과 입자의 크기는 <10 nm이며, 표면이 알킬기로 덮여있어 소수성 용제인 헥산에 쉽게 용해되었으며 입자표면은 소량의 산화된 Si-O-Si 그룹을 포함하고 있었다. UV-vis 및 PL 분석결과 표면 알킬기를 포함하는 실리콘 나노입자의 전형적인 광 특성을 보여 간단한 반응단계를 통하여 표면이 Octyl기로 덮인 실리콘 나노입자를 합성할 수 있음을 보였다. 본 연구에서 시도한 합성법을 응용할 경우, 향 후 실리콘 나노입자의 표면에 다양한 기능기를 one-pot으로 도입할 수 있을 것으로 기대된다.

• 자원환경지질
• /
• 제41권6호
• /
• pp.709-717
• /
• 2008

대표적 오염 방사능 핵종인 세슘(cesium)으로 오염된 수계를 정화하기위하여 해바라기(Sunflower; Helianthus annuus L.)와 강낭콩(Bean; Phaseolus vulgaris var.)을 이용한 뿌리여과(rhizofiltration) 실내 실험을 실시하였다. 해바라기의 경우 뿌리여 과실험 24시간 내에 세슘의 98%를 제거하였으며, 강낭콩은 99%의 제거율을 나타내어 친환경적이며 녹색 정화방법인 뿌리여과법이 세슘으로 오염된 수계 정화에 매우 효과적으로 적용 할 수 있음을 제시하였다. 수용액의 pH에 따른 뿌리여과법의 세슘 제거 실험 결과, 두 식물 모두에서 오염수의 pH가 $5{\sim}9$인 경우 98%이상의 제거효율을 나타내었다. 뿌리여과법 실험 후 식물에 농축된 세슘량을 부위별로 측정한 결과, 수용액으로부터 식물로 이동한 총 세슘의 80% 이상이 뿌리에 농축되어 있는 것으로 나타났다. 이러한 결과는 대규모 오염 현장에서 뿌리여과법을 적용 시, 농축이 심한 뿌리 부분만을 후 처리함으로써 비용과 시간을 절감할 수 있음을 의미한다. 뿌리여과법 적용 후 식물 뿌리 표면의 SEM이미지와 EDS성분 분석 결과, 수용액 내 세슘은 먼저 뿌리 표면에 이온상으로 흡착한 후 서서히 뿌리 내부로 흡수되는 것으로 판단되었다.