• CDE review
• /
• v.5 no.1
• /
• pp.39-40
• /
• 1999

• Proceedings of the KIEE Conference
• /
• 2004.05a
• /
• pp.56-58
• /
• 2004

In this paper, we propose an adaptive beamforming algorithm for array antenna. The proposed beamforming algorithm is based on EDS (Euclidean Direction Search) algorithm. Generally LMS algorithm has a much slower rate of convergence, but its low computational complexity and robustness make it a representative method of adaptive beamforming. Although the RLS algorithm is known for its fast convergence to the optimal Wiener solution, it still suffers from high computational complexity and poor performance. The proposed EDS algorithm has a rapid convergence better than LMS algorithm, and has a computational more simple complexity than RLS algorithm. In this paper we compared the efficiency of the EDS algorithm with a standard LMS algorithm.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.2
• /
• pp.309-314
• /
• 2010

The surface modified $LiMn_2O_4$ materials with Li-Fe composites were prepared by a sol-gel method to improve the electrochemical performance of $LiMn_2O_4$ and were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS), and transmission electron microscopy (TEM)-EDS. XRD results indicate that all the samples (modified and pristine samples) have cubic spinel structures, and XRD, XPS, and TEM-EDS data reveal the formation of $Li(Li_xFe_xMn_{2-2x})O_4$ solid solution on the surface of particles. For the electrochemical properties, the modified material demonstrated dramatically enhanced reversibility and stability even at elevated temperature. These improvements are attributed to the formation of the solid solution, and thus-formed solid solution phase on the surface of $LiMn_2O_4$ particle reduces the dissolution of Mn ion and suppresses the Jahn-Teller effect.

• CDE review
• /
• v.9 no.1
• /
• pp.54-58
• /
• 2003

• Journal of the Korean institute of surface engineering
• /
• v.42 no.1
• /
• pp.53-57
• /
• 2009

Recovery of heavy-metallic component from a waste solution of factory was undertaken by the solar cell electricity. The solution was obtained from an electrolytic etching process of 316L stainless steel. The electrolysis of the solution for recovery of heavy metallic components was made with platinum plated titanium mesh anode and copper plate cathode. Analysis for the solution and electro-winned materials were made by EDS, XRD and SEM. Iron, chromium, and sulfur components were recovered on the cathode from the solution. Result of EDS analysis for the electro-winned materials revealed that some metal oxide were contained in the recovered material. The recovered materials were expected to have metallic form only by the electrolysis, but metal compounds were contained because of weak solar cell power. Nickel and manganese component in the solution doesn't recovered by this electrolysis process, but they made a sludge with phosphoric acid in the solution.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.7
• /
• pp.294-301
• /
• 2002

A new dynamic scheduling algorithm is proposed for CAN-based real-time system in this paper. The proposed algorithm is extended from an existing EDS(Earliest Deadline Scheduling) approach having a solution to the priority inversion. Using the proposed algorithm, the available bandwidth of network media can be checked dynamically, and consequently arbitration delay causing the miss of deadline can be avoided. Also, non-real time messages can be processed with their bandwidth allocation. Full network utilization and real-time transmission feasibility can be achieved through the algorithm. To evaluate the performance of algorithm, two simulation tests are performed. The first one is transmission data measurement per minute for periodic messages and the second one is feasibility in the system with both periodic messages and non-real time message.

• Advances in concrete construction
• /
• v.12 no.6
• /
• pp.507-515
• /
• 2021

To evaluate the influence of slag on the alkalinity of pore solution and microstructure of concrete, this paper performs a leaching experiment on hardened cement-slag pastes (HCSP) slice specimens with different slag content in purified water. The pH value of pore solution, average porosity, morphology, phase composition and Ca/Si of HCSP specimens in the leaching process are measured by solid-liquid extraction, saturated-dried weighing, scanning electron microscopy-energy dispersive spectrometry (SEM-EDS) and X-ray diffraction (XRD). Results shows that the addition of slag can mitigate an increase in porosity and a decrease in Ca/Si of HCSP in the leaching process. Besides, an appropriate slag content can improve the microstructure so as to obtain the optimum leaching resistance of HCSP, which can guarantee the suitable alkalinity of pore solution to prevent a premature corrosion of reinforced bar. The optimum slag content is 40% in HCSP with a water-binder ratio of 0.45, and an excessive slag causes a significant decrease in the alkalinity of pore solution, resulting in a loss of protection on reinforced bar in HCSP.

• Analytical Science and Technology
• /
• v.8 no.3
• /
• pp.293-298
• /
• 1995

The stability of brass coated on steel cords with pH and applied constant potential changes in aqueous solution has been investigated by AC impedance measurements. In solutions of the constant pH, as a applied constant potential is shifted to positive potential, the coating pore resistance is reduced. The fact indicates that as a applied constant potential is shifted to positive potential, the brass coated is dissolved more in solution. The stability of brass coated on steel cords decrease in the order pH=7.1 > pH=4.0 > pH=10.0. The above results are demonstrated by the data of scanning of electronic microscopy(SEM)/energy dispersive spectrometer(EDS).

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.03a
• /
• pp.110-111
• /
• 2009

A solution containing 3-Mercaptopropyltr-imethoxysilane(MPTMS) was employed to modify surface of cotton fabrics with a silver colloid. Silver nanoparticles were applied on cotton fabrics via treatment with 3-MPTMS. The rate of silver nanoparticles on the fabric surface were measured with Energy Dispersive Spectroscopy(EDS). EDS results confirm the silver atom on the cotton surface.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.598-599
• /
• 2017

In motor application, High efficiency is important. So Design engineer select small gate resistor for lower switching. But There is side effect with small gate resistor. It makes large dv/dt and system request large EMI filter. It makes price increase. This paper introduce about gate drive IC which have solution both of lower loss and EMI issue.