• 제목/요약/키워드: EDA

검색결과 511건 처리시간 0.021초

수용성 하이브리드수지(폴리우레탄-에폭시)의 합성 및 사슬 연장에 관한 연구 (A Study of Chain extension and Synthesis in Waterborne Polyurethane-Epoxy Hybrid Resin)

  • 이주엽;김기준
    • 한국응용과학기술학회지
    • /
    • 제28권1호
    • /
    • pp.109-117
    • /
    • 2011
  • In this study, we experimented that how influence chain extension to waterborne urethane-epoxy hybrid resin for leather garment coatings. First of all, We had analyzed datas by FT-IR, SEM and machanical properties. By instruments analysis measurement we confirmed that synthesis of epoxy and hybrid resin. In this experiment we knew that polyurethane-epoxy hybrid resin have 5 grades of solvent resistance. Tensile strength measured in the polyurethane-epoxy resin(EDA 5.37g, 2.386 $kg_f/mm^2$) had the most strong strength.. Also polyurethane-epoxy hybrid resin had better result(EDA 5.37g. 37.4 mg. loss) than other hybrid resins. As hight proportion of EDA in hybid resin, we obtained low elongation and low flexibility. In this result, chain extension of waterborne polyurethane-epoxy hybrid resin showed that how effect in leather coating by ratio of EDA.

WEB 통합 Electronic Design Automation 회로설계 및 부품 관리 시스템 개발에 관한 연구 (Web-Based Electronic Design Automation Circuit Design and Part Management System Development)

  • 강도영;하기종;최영규
    • 한국항행학회논문지
    • /
    • 제12권3호
    • /
    • pp.255-262
    • /
    • 2008
  • 본 논문은 JSP (Java Server Page) 웹 서버 기반 인터넷 웹 브라우저 용 회로부품정보 관리 시스템을 구축하였다. 설계자가 부품정보의 검색 및 신규 등록을 수행할 수 있도록 하였으며, 이를 EDA (Electronic Design Automation) 시스템과 직접 연동하여 회로 및 부품의 설계를 실 시간적으로 적용하도록 하는 웹 연동 회로부품 관리 시스템을 구현하였다. 그리하여 개별 설계자들이 작성 관리하던 EDA 시스템 부품 라이브러리를 웹 기반으로 관리 사용할 수 있도록 하여 회로설계 및 부품 개발에 효율성을 이루었다.

  • PDF

아연 스트레스를 받는 식물의 성장을 위한 생분해되는 킬레이트로서 에틸렌디아민 (Ethylenediamine as a Promising and Biodegradable Chelating Agent in Growth of Plant Under Zinc Stress)

  • 이상만
    • 한국환경농학회지
    • /
    • 제29권2호
    • /
    • pp.115-119
    • /
    • 2010
  • Zinc (Zn) is an essential element required for growth and development of plants. However, Zn can be toxic to plants when it presents excessive amount. Phytoextraction is an economic and environment-friendly technique using plants to clean-up metal-contaminated soils. However, the technique cannot be applied in highly metal-contaminated areas because plants will not normally grow in such conditions. Therefore, this research focuses on identifying chelating agents which are biodegradable and applicable to highly metalcontaminated areas. Zn as a target metal and cysteine (Cys), histidine (His), malate, citrate oxalate, succinate, and ethylenediamine (EDA) as biodegradable chelating agents were selected. Plants were grown on agar media containing various chelating agents with Zn to analyze the effect on plant growth. Malate and His slightly increased the inhibitory effect of Zn on root growth of plants, whereas Cys, citrate, oxalate, and succinate did not show significant effects. However, EDA strongly diminished the inhibitory effect of Zn on root growth. The effect of EDA is correlated with decreased Zn uptake into the plants. In conclusion, as biodegradable chelating agents, EDA is a good candidate for growth of plants in highly Zn-contaminated areas.

압저항형 압력센서의 통합해석 및 검증 (Synthesized analysis and its verification of the piezoresistive pressure sensor)

  • 이승환;이곤재;한승오
    • 전기학회논문지
    • /
    • 제58권3호
    • /
    • pp.573-577
    • /
    • 2009
  • Piezoresistive pressure sensor have become the successfully-commercialized MEMS product and the related technologies have been well developed over the past decades. Regarding the design methodology, however, the coupled-physics FEM analyses of the transducer itself and the signal-processing circuitry design based on the conventional EDA are separated and both of the analyses were sequentially processed for the full design of the pressure sensor. For the fast and effective R&D, new design methodology is proposed in this paper where the FEM results are linked to the EDA environment and therefore most of the design works can be done in the EDA environments, which means the time-consuming FEM analyses can be minimized. In order to verify the proposed approach, a typical piezoresistive pressure sensor having the silicon diaphragm and piezoresistors was modeled and analyzed based on the proposed methodology. The verification results showed that the simulated results were matched well with the measured data within the 7% difference while the simulation time was reduced less than 5% compared to the conventional methodology. Through the proposed approach, various types of the piezoresistive pressure sensors can be developed in more effective way.

정상 성인에서 청성유발 피부전위 (Auditory Evoked Skin Potential in Normal Subjects)

  • 허승덕;정동근;서덕준;김광년;김기련;강명구;김리석
    • 음성과학
    • /
    • 제12권2호
    • /
    • pp.81-88
    • /
    • 2005
  • Electrodermal activity(EDA) is a bio-electric signal which occurs at the skin surface during the sweating. EDA reflects the activity of the sympathetic axis of the autonomic nervous system. EDA is associated with the eccrine sweat gland at the palmar and plamar surface. This study was aimed to characterize the relationship between EDA and auditory stimulus intensities. Acoustic stimulus used in this study were 500 Hz, 1 kHz, 2 kHz of narrow band noise, which were representative of speech frequencies in audible range. Stimulus intensity between 90 and 30 dB in 10 dB within dynamic range. After deriving the minimum stimulus intensity(threshold of skin potential) which elicited skin potential, and then the latency and amplitude were derived from waveform of skin potential, each latency and amplitude were compared to stimulus intensity. The waveform of skin potential were recorded stably, and the threshold of skin potential appeared nearly the hearing threshold level of the participant. The latency was decreased and the amplitude was increased according to the increase of the stimulus intensity. These results suggest that auditory evoked skin potential can be applicable to auditory assessment and audiological diagnosis tool.

  • PDF

운송 안전 서비스를 위한 IP-USN 게이트웨이 소프트웨어 스택에서의 오류 동기화 (An Error Synchronization running on IP-USN Gateway Software Stack for Transportation Safety Service)

  • 고응남
    • 한국정보전자통신기술학회논문지
    • /
    • 제8권1호
    • /
    • pp.12-17
    • /
    • 2015
  • 본 논문은 운송 안전 서비스를 위한 IP-USN 게이트웨이 소프트웨어 스택에서의 오류 동기화에 대한 내용을 기술한다. 이 시스템은 TS_EDA, TS_ESA로 구성되어 있다. TS_EDA는 IP-USN 게이트웨이 소프트웨어 스택 환경에서 멀티미디어 원격 제어를 위하여 오류를 감지하는 에이전트이다. TS_ESA는 IP-USN 게이트웨이 소프트웨어 스택 환경에서 멀티미디어 원격 제어를 위하여 오류를 동기화하는 에이전트이다. 운송 안전 서비스를 위한 IP-USN 게이트웨이 소프트웨어 스택에서의 멀티미디어 공동 작업 환경의 관점에서 오류 동기화는 협동 작업에 참가하는 참가자에게 상호작용적으로 오류를 동기화한다.

Characteristics of Sucrose Thermal Degradation with High Temperature and High Pressure Treatment

  • Woo, Koan-Sik;Hwang, In-Guk;Lee, Youn-Ri;Lee, Jun-Soo;Jeong, Heon-Sang
    • Food Science and Biotechnology
    • /
    • 제18권3호
    • /
    • pp.717-723
    • /
    • 2009
  • Thermal degradation characteristics of sucrose was investigated. A 20% sucrose solution was heated to temperatures of $110-150^{\circ}C$ for 1-5 hr. Chromaticity, pH, organic acids, 5-hydroxymethylfurfural (HMF), free sugars, electron donating ability (EDA), and ascorbic acid equivalent antioxidant capacity (AEAC) of the heated sucrose solutions were evaluated. With increasing temperatures and times, the L-, a-, and b-values decreased; however, total color difference (${\Delta}E_{ab}$) increased. The pH and sucrose contents decreased, and fructose and glucose contents increased with increasing heating temperature and time. Organic acids, such as formic acid, lactic acid, and levulinic acid, and HMF contents increased with increasing heating temperatures and times. EDA (%) and the AEAC of the heated sucrose solutions increased with increasing heating temperature and time. The heated sucrose solution was more effective than unheated sucrose solution, having higher EDA (90 fold), and AEAC (13 fold).

CoAP 기반 게이트웨이 소프트웨어 스택에서의 오류 동기화 (An Error Synchronization running on Gateway Software Stack based on CoAP)

  • 고응남
    • 한국정보전자통신기술학회논문지
    • /
    • 제9권1호
    • /
    • pp.114-119
    • /
    • 2016
  • 사물 인터넷과 멀티미디어 협동 작업 환경의 필요성을 기술하고, 그 기반 하에 CoAP 기반 스택에서의 오류 처리에 대해서 제안하였다. 본 논문은 CoAP 기반 게이트웨이 소프트웨어 스택에서의 오류 동기화에 대한 내용을 기술한다. 이 시스템은 CS_EDA, CS_ESA로 구성되어 있다. CS_EDA는 CoAP 기반 게이트웨이 소프트웨어 스택 환경에서 멀티미디어 원격 제어를 위하여 오류를 감지하는 에이전트이다. CS_ESA는 CoAP 기반 게이트웨이 소프트웨어 스택 환경에서 멀티미디어 원격 제어를 위하여 오류를 동기화하는 에이전트이다. CoAP 기반 게이트웨이 소프트웨어 스택에서의 멀티미디어 공동 작업 환경의 관점에서 오류 동기화는 협동 작업에 참가하는 참가자에게 상호작용적으로 오류를 동기화한다.

오가피, 구기자, 오미자, 토사자, 복분자 및 차전자를 첨가한 한방 약술의 항산화 효과 (Antioxidant Effects of Herbal Wine containing Acanthopanax sessiliflorus, Lycium chinense, Schizandra chinensis, Cuscutae semen, Rubus coreanum and Plantaginis semen)

  • 오성천
    • 한국응용과학기술학회지
    • /
    • 제33권4호
    • /
    • pp.693-697
    • /
    • 2016
  • 본 연구는 추출물 농도에 따른 생리활성물질의 용출량을 측정하기 위해 전자공여능과 총 폴리페놀 함량을 측정한 결과이다. 전자공여능은 추출물의 첨가 농도가 15%인 경우는 21.81%로 나타났고, 35% 농도에서 40.45%로 가장 높았다. 한약재의 첨가 농도가 증가함에 따라 전자공여능은 유의적으로 증가하였다(p<0.05). 가장 높은 35% 첨가 농도에서의 40.45% 공여능은 이보다 더 낮았으므로 전자공여능은 미약한 것으로 생각된다. 총 폴리페놀함량은 한방약술 15%에서는 $113.89{\pm}1.79{\mu}g\;GAE/m{\ell}$로 나타났고, 한방약술 35% 에서는 $274.24{\pm}0.71{\mu}g\;GAE/m{\ell}$로 나타나서 첨가물의 농도 증가에 따라 총 폴리페놀의 함량도 유의적으로 증가하였다(p<0.05). 추출물 농도가 30%에서 총 폴리페놀 함량의 증가 폭이 $61.75{\mu}g\;GAE/m{\ell}$로 가장 높았다.

$PEO-EDA-LiClO_4$ 블렌드계 탄성체 전해질의 제조와 특성 (Preparation and Characterization of Elastomeric Solid Electrolyte Based on $PEO-EDA-LiClO_4$ Blends)

  • 장영욱;주현석
    • Elastomers and Composites
    • /
    • 제39권1호
    • /
    • pp.36-41
    • /
    • 2004
  • Poly(ethylene oxide)(PEO)와 epoxy diacrylate(EDA) 및 금속염인 LiClO_4$를 블렌드하고 자외선 가교시킴으로써 이온전도특성을 나타내는 고체 전해질을 제조하고, 제조된 전해질의 이온 전도도를 블렌드조성 염농도 및 온도 변화에 따가 측정하였다. PEO/EDA의 조성비가 70/30 wt%이고 ethylene $oxide/Li^+$의 몰비가 10인 전해질이 $25^{\circ}C$에서 $1.2{\times}10^{-5} S/cm$에 달하는 높은 이온전도도를 나타내었다. 제조된 전해질 필름은 투명하였으며 고무와 같은 탄성을 나타내었다. DSC, XRD 및 편광현미경을 이용한 모폴로지 분석으로부터 에폭시 사슬이 PEO의 결정화를 억제함으로써 완전히 무정형인 블렌드를 제조할 수 있음을 확인할 수 있었다.