• Journal of Korean Society of Steel Construction
• /
• v.20 no.1
• /
• pp.21-31
• /
• 2008

response surface method (RSM) is widely used to evaluate th e extremely smal probability of ocurence or toanalyze the reliability of very complicated structures. Althoug h Monte-Carlo Simulation (MCS) technique can evaluate any system, the procesing time of MCS dependson the reciprocal num ber of the probability of failure. The stochastic finite element method could solve thislimitation. However, it is limit ed to the specific program, in which the mean and coeficient o f random variables are programed by a perturbation or by a weigh ted integral method. Therefore, it is not aplicable when erequisite programing. In a few number of stage analyses, RSM can construct a regresion model from the response of the c omplicated structural system, thus, saving time and efort significantly. However, the acuracy of RSM depends on the dist ance of the axial points and on the linearity of the limit stat e functions. To improve the convergence in exact solution regardl es of the linearity limit of state functions, an improved adaptive response surface method is developed. The analyzed res ults have ben verified using linear and quadratic forms of response surface functions in two examples. As a result, the be st combination of the improved RSM techniques is determined and programed in a numerical code. The developed linear adapti ve weighted response surface method (LAW-RSM) shows the closest converged reliability indices, compared with quadratic form or non-adaptive or non-weighted RSMs.

• Biomolecules & Therapeutics
• /
• v.28 no.5
• /
• pp.456-464
• /
• 2020

Mast cells (MCs) are systemically distributed and secrete several allergic mediators such as histamine and leukotrienes to cause type I hypersensitivity. Dasatinib is a type of anti-cancer agent and it has also been reported to inhibit human basophils. However, dasatinib has not been reported for its inhibitory effects on MCs or type I hypersensitivity in mice. In this study, we examined the inhibitory effect of dasatinib on MCs and MC-mediated allergic response in vitro and in vivo. In vitro, dasatinib inhibited the degranulation of MCs by antigen stimulation in a dose-dependent manner (IC₅₀, ~34 nM for RBL-2H3 cells; ~52 nM for BMMCs) without any cytotoxicity. It also suppressed the secretion of inflammatory cytokines IL-4 and TNF-α by antigen stimulation. Furthermore, dasatinib inhibited MC-mediated passive cutaneous anaphylaxis (PCA) in mice (ED₅₀, ~29 mg/kg). Notably, dasatinib significantly suppressed the degranulation of MCs in the ear tissue. As the mechanism of its effect, dasatinib inhibited the activation of Syk and Syk-mediated downstream signaling proteins, LAT, PLCγ1, and three typical MAP kinases (Erk1/2, JNK, and p38), which are essential for the activation of MCs. Interestingly, in vitro tyrosine kinase assay, dasatinib directly inhibited the activities of Lyn and Fyn, the upstream tyrosine kinases of Syk in MCs. Taken together, dasatinib suppresses MCs and PCA in vitro and in vivo through the inhibition of Lyn and Fyn Src-family kinases. Therefore, we suggest the possibility of repositioning the anti-cancer drug dasatinib as a treatment for various MC-mediated type I hypersensitive diseases.

• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.353-357
• /
• 2011

For the purpose of introducing hydrophilic function to pristine PVDF, pristine PVDF was modified under atmosphere and aqueous vapor by irradiating electron beam (EB). EB dose was varied from 0 to 125 K Gray, respectively. Their changes of chemical composition /structure were observed and evaluated by FT-IR, EDS and DSC. Also, their surface behaviors were evaluated by contact angle. In FT-IR study, it was confirmed that hydroxyl functions were introduced to pristine PVDF. In EDS analysis, mole ratio of F (fluoride) was almost constant (about 33%) in spite of increasing EB dose, meaning that hydroxyl function was introduced via dehydrozenation, not via deflurodination. In DSC study, $T_g$ increased with increasing EB dose, which was reconfirmed that hydroxyl function was introduced via dehydrozenation. $T_m$ increased with increasing EB dose, inferring that the increase in EB dose led to more outbreak of hydroxyl function which led to more enhanced hydrogen bond. In the result of contact angle, pristine PVDF film was $62^{\circ}$ and 125 K Gray-irradiated PVDF film was even $13^{\circ}$. All results showed that pristine PVDF was successfully changed to hydrophilic PVDF.

• Journal of Animal Science and Technology
• /
• v.49 no.6
• /
• pp.711-718
• /
• 2007

Most cattle breeds have a coat color pattern that is characteristic for the breed. Korean cattle(Hanwoo) has a coat color ranging from yellowish brown to dark brown including a red coat color. Variation in the Hanwoo coat color is likely to be the effects of modified genes segregating within the Hanwoo breed. MC1R encoded by the Extension(E) locus was almost fixed with recessive red e allele in the Hanwoo, but other gene(s) might be affecting the variation of the Hanwoo coat color into yellowish to red brown. We have analyzed a segregation of coat color in the F2 families generated from two Hanwoo bulls(yellowish brown) mated to six F1 dams(black) derived from Hanwoo and Holstein crosses. Segregation of coat color in the offspring found a ratio of 1(yellowish brown) : 1(black) and this ratio indicates that a single gene may play a major role for the Hanwoo coat color. We further investigated SNPs in MC1R, ASIP and TYRP1 loci to determine genetic cause of the Hanwoo coat color. Several polymorphisms within ASIP intron 2 and TYRP1 exons were found but not conserved within the Hanwoo population. However, the segregation of the MC1R e allele was completely associated with the Hanwoo coat color. Based on this information, it is clear that the MC1R e allele is mainly responsible for the yellowish red Hanwoo coat color. Further study is warrant to identify possible genetic interaction between MC1R e allele and other coat color related gene(s) for the variation of Hanwoo coat color from yellowish brown to dark brown. (Key words : Hanwoo, Coat color, SNP, MC1R, ASIP, TYRP1)

• Journal of Embryo Transfer
• /
• v.20 no.2
• /
• pp.123-128
• /
• 2005

This study examines the effects of kinds and concentrations of cryoprotectants on the survival rate of vitrification-thawed porcine oocytes, together with the effects on survival, in vitro fertilization and development of immature oocytes. 1. The developmental rate of oocytes to MII and diploid stage when the vitrification-thawed of recovered immature oocytes cultured for 0, 15, 30 and 40h were cultured for 0, 15, 30 and 40h were $56.7\%,\;53.3\%,\;63.3\%,\;65.0\%\;and\;23.3\%,\;18.3\%,\;10.0\%,\; 3.3\%$, respectively. The in vitro development to MII stage were lower than the control group $(78.2\%)$, but higher fo. diploid stage $(5.5\%)$. 2. When the vitrification of immature oocytes after being culture for 0, 15, 30 and 40 hours, the survival rate were $34.0\%,\;26.0\%,\;18.0\%\;and\;10.0\%$ respectively. This result was lower than that of the control group $(60.0\%)$. 3. When the fertilization of the vitrified immature oocytes after being culture for 0, 15, 30 and 40 hours, the in vitro fertilization rate were $60.0\%,\;54.0\%,\;48.0\%,\;38.0\%$, and developmental rates were $26.0\%,\;18.0\%,\;8.0\%,\;4.0\%$, respectively. This results were lower than the control group $(78.0\%\;and\;38.0\%)$. 4. When the fertilization of the immature oocytes after being culture for $0\~15$ hours vitrified with EDS and ETS, the fertilization and developmental rates were $50.0\%,\; 22.0\%$ and $46.0\%,\;18.0\%$, respectively. This results were lower than the control group $(74.0\%\;and\;38.0\%)$.

• Korean Journal of Animal Reproduction
• /
• v.23 no.1
• /
• pp.85-92
• /
• 1999

This study was designed to determine effect of cryoprotectant kinds and cell stages on OPP vitrification method in mouse embryos. The freezing speed, cryoprotectants and cell stage could affect of embryo viability following various vitrification methods. The vitrification solution used were consisting of 40% (v/v) ethylene glycol, 18% (w/v) Ficoll, 0.3 M sucrose solution in holding medium (D-PBS supplemented with 5% FCS: HM) (EFS) or 16.5% ethylene glycol , 16.5% dimethyl sulfoxide, 0.5 M sucrose in HM (EDS). The embryos were collected from oviduct at 18 h after hCG injection and then washed and cultured in mHTF medium until use. In experiment 1, the blastocysts were vitrified by OPP straw to determine the optimal vitrification solution of EFS or EDS. The post-thaw survival rates at re-expanded stage rates were significantly different between EFS and EDS (95.0 vs 100%), but at hatching stage was not different between EFS and EDS (90.0 vs 95.0%). respectively. In experiment 2, zygotes, 2-, 4-cell, morula and blastocysts were vitrified by OPP method to determine the acceptable of early stage embryos. The development rates to expanded blastocyst in zygote (70.0%) were significantly lower rather than those in 2-, 4- 8-cell, compacted morula or blastocyst (89.7, 90.0, 92.8, 97.6 or 97.5%), respectively. However, the cell number of post-thaw developed to expanded blastocyst in blastocyst and control blastocyst stage (39.6$\pm$2.81, 35.7$\pm$2.98) were significanty higher than those in zygote, 2-, 4-, 8-cell, compacted morula (29.8$\pm$3.21, 31.3$\pm$3.83, 29.3$\pm$3.58, 28.9$\pm$3.21 or 30.8$\pm$2.93). In experiment 3, the zygotes were exposed in VSl for 1, 2, and 3 min to the optimal exposed time. The cleavage rates (91.6, 88.5, 88.9%) and develop mental rates to blastocyst (83.3, 74.3 and 69.4%) depends on the exposed time in VSl were not significantly different among 1, 2, or 3 min, respectively. The cell number also were not significantly different among exposed time in VS1. respectively. These results indicate that OPP method could be useful for vitrification either EFS or EDS vitrification solution. The post-thaw survival rates at zygote were significantly lower than those at 2-, 4-, 8-cell, morula or blastocyst, respectively. The zygote stage were more sensitive rather than late stage embryos. The exposing time in VS1 for 1 min was better than that for 2 or 3 min, even it was not significantly different. The OPP vitrification method could be useful of mouse embryos either with EFS or EDS vitrification solution.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.205-208
• /
• 2005

최근 열선 화학 기상 증착법(HWCVD)은 낮은 온도에서 TFT용 Poly Si 중착을 할 수 있다는 점과 실리콘 박막을 빠른 속도로 증착할 수 있다는 점에서 각광을 받고 있다. 본 연구에서는 HWCVD를 이용하여 태양전지를 제조하고 그 특성을 평가하였다. 조건에 따른 실리콘 박막의 특성 변화를 알기 위해 corning glass 및 실리콘 wafer에 다양한 조건에서 단위 박막(intrinsic layer)을 증착하였고 이 결과를 바탕으로 p/i/n 구조의 태양전지를 제조하였다. Ta 열선 온도는 1700-2000도였고 가스 원료인 $SiH_4$와 수소의 비율을 조절하면서 그 영향을 관찰하였다. 태양전지의 경우 p충과 n충은 PECVD로 증착하였으며 단위박막 및 태양전지 i충 증착시 기판과 열선간의 거리는 7cm, 기판 온도는 $200^{\circ}C$와 $250^{\circ}C$로 고정하였고 작업압력은 30mTorr였다. 단위 박막 특성 평가를 위해 암/광 전도도, SEM, Raman Scattering, FT-IR등을 사용하였으며 태양전지 특성 평가를 위해 I-V 및 Spectral response를 측정하였다. 열선 온도가 증가함에 따라 증착속도 및 결정화 분율은 증가하였다. 특히 비정질에서 결정질로 전이되는 구간은 매우 좁았으며 여러 분석 방법에서 일치되는 결과를 보였다. $SiH_4$ 유량이 늘어날수록 비정질이 결정질로 바뀌는 열선 온도가 증가하였으며 기판 온도가 낮을 경우 또한 결정으로 바뀌는 열선 온도가 증가하였다. 태양전지의 경우 열선 온도가 증가함에 따라 $V_{oc}$ 및 W가 낮아졌으며 $J_{sc}$, 는 증가하는 경향을 보였으며 결정질 비율이 증가하는 것을 관찰할 수 있었다. 이러한 경향은 quantum efficiency 결과에서도 확인할 수 있었다.용을 반복하면서 석재 내부와 외부의 암석 및 결정에 균열과 미세열극 등이 생성되어 석재 자체의 구조적 안정성에 영향을 주고 있다. 따라서 감은사지 석탑은 지리적 환경 차이로 인해 일반적인 환경의 석조물들과는 다른 형태의 풍화양상을 보이고 있어서 풍화양상 및 풍화형태에 대한 정확한 연구와 이해를 바탕으로 보존대책이 마련되어야 한다.되었다. 이런 모든 시편들을 각 탈염방법에 따라 탈염처리한 후 XRD와 SEM-EDS으로 분석한 결과 인철광과 침철광은 어떠한 변화도 보이지 않았고, 다만 적금광으로 동정된 시편만이 잔존하지 않았다. 철기 제작별 $Cl^-$ 이온 추출량과 탈염효과에 대한 비교 실험은 이온 크로마토그래피 분석 결과와 마찬가지로 단조 철제유물이 주조 철제보다 $Cl^-$ 이온을 많이 가지고 있었으며, 탈염 처리 후에는 $Cl^-$ 이온은 전혀 발견되지 않았다. 이상의 결과 $K_2CO_3$와 Sodium 용액은 탈염처리에서 가장 적합한 탈염처리 용액으로 알수가 있었으며 특히 어떠한 탈염 용액으로 유물을 처리한다 해도 철제유물에 생성된 부식물은 제거되지 않는다는 것을 알게 되었다. 따라서 보존처리자는 유물 표면의 부식 상태만을 보고 처리하기 보다는 철기제작물로 고려하여 처리하는 것이 필요하다. 또한 금속에 부식을 야기시키는 $Cl^-$ 이온과 부식물을 완전하게 제거하여 탈염처리를 하는 것이 유물 부식을 최대한 지연시킬 수 있는 것이라 생각된다.TEX>$88\%$)였다.(P=0.063). 결론: 본 연구에서는 MTHFR C/T & T/T 유전자 다형성이 위암의 발생과 그 위치에 대해 관련이 있는 것으로 여겨지고, 흡연력, 음주력과는 관련이 없는 것으로 여겨진다.험이 커지는 경향을 보였으나, 나이 및 병기, 종양의 크기, MD-BED $Gy_{10}$ 등의 예후 인자를 보정한 다변

• Economic and Environmental Geology
• /
• v.51 no.2
• /
• pp.87-97
• /
• 2018

The cesium (Cs) removal from the contaminated water system has been considered to be difficult because the cesium likes to exist as soluble phases such as ion and complexes than the solid in water system. Many researches have focused on developing the breakthrough adsorbent to increase the cesium removal efficiency in water. In this study, the laboratory scale experiments were performed to investigate the feasibility of the adsorption process using the bamboo charcoal for the Cs contaminated water system. The Cs removal efficiency of the bamboo charcoal were measured and the optimal adsorption conditions were determined by the adsorption batch experiments. Total 5 types of commercialized bamboo charcoals in Korea were used to identify their surface properties from SEM-EDS and XRD analyses and 3 types of bamboo charcoals having large specific surface areas were used for the adsorption batch experiment. The batch experiments to calculate the Cs removal efficiency were performed at conditions of various Cs concentration (0.01 - 10 mg/L), pH (3 - 11), temperature ($5-30^{\circ}C$), and adsorption time (10 - 120 min.). Experimental results were fitted to the Langmuir adsorption isotherm curve and their adsorption constants were determined to understand the adsorption properties of bamboo charcoal for Cs contaminated water system. From results of SEM-EDS analyses, the surfaces of bamboo charcoal particles were composed of typical fiber structures having various pores and dense lamella structures in supporting major adsorption spaces for Cs. From results of adsorption batch experiments, the Cs-133 removal efficiency of C type bamboo charcoal was the highest among those of 3 bamboo charcoal types and it was higher than 75 % (maximum of 82 %) even when the initial Cs concentration in water was lower than 1.0 mg/L, suggesting that the adsorption process using the bamboo charcoal has a great potential to remove Cs from the genuine Cs contaminated water, of which Cs concentration is low (< 1.0 mg/L) in general. The high Cs removal efficiency of bamboo charcoal was maintained in a relatively wide range of temperatures and pHs, supporting that the usage of the bamboo charcoal is feasible for various types of water. Experimental results were similar to the Langmuir adsorption model and the maximum amount of Cs adsorption (qm:mg/g) was 63.4 mg/g, which was higher than those of commercialized adsorbents used in previous studies. The surface coverage (${\theta}$) of bamboo charcoal was also maintained in low when the Cs concentration in water was < 1.0 mg/L, investigating that the Cs contaminated water can be remediated up with a small amount of bamboo charcoal.

• Journal of Preventive Medicine and Public Health
• /
• v.16 no.1
• /
• pp.163-192
• /
• 1983

In order to facilitate the Korean government's efforts in integrating family planning and maternal & child health at the primary health care level (or township level), the Soon Chun Hyang College of Medicine, with the financial and technical assistance of WHO, has under-taken a service research project. The project has employed a quasi-experimental study design introducing interventions tat provide crucial factors lacking in the ongoing government programs such as midwives and qualified referral physicians. The study is being conducted in three locations, one control area and two study areas. Before introducing trained Nurse/Midewives into the study areas, a baseline prevalence survey was undertaken from 15 July 1981 to 10 August 1981 in selelcted townships of Seosan County. In this sample survey of bath the study and control areas, 2,484 eligible women (97% reponse rate) were interviewed to obtain benchmark data on basic evaluation indicators related to family planning and maternal and child health. The salients results were summarized as follows.: 1. CONTACT RATES WITH HEALTH WORKERS; During the year preceding the survey, 12% of women were visited by government health workers. The primary reason for such visits by health workers was family planning (45% of the visits). About 34% of the women visited the health centers during the year. The primary reason for visiting health centers was immunizations for their children (45% of the visits). 3. FAMILY PLANNING USE RATE; The baseline data showed little difference between women in the study area and the control area on contraceptive use. Approximately 59% were currently using some methods. However, among those current users, almost half were practicing less effective methods of birth control such as rhythm or withdrawal. Among other methods, the tubectomy was the most popular (16%), while use of the IUD, oral pill and condom together reached only 14%. 3. PRENATAL CARE RATE; About 75% of the women reported no prenatal care for their last births (the youngest child of each women), Additionally, among women received prenatal care, over half had only one visit. 4. ATTENDANCE AT DELIVERY; Most of the women surveyed (over 80%) were attended by a non-medical person during their last delivery. These figures are somewhat comparable to the national figure of 84% for remote areas. 5. POSTNATAL CARE; The proportion of women reporting postnatal care was only 4.5%, and postnatal care was not received by the majority of women surveyed. 6. CHILD HEALTH CARE: In contrast to the low rate of maternity care for women themselves, most women reported obtaining immunization care for their children. About 75% of the women obtained Polio and/or DPT, 58% BCG, and 44% Measles vaccine for their children. However, in terms of illness care, while 35% of the women stated that their youngest child had been sick during the month preceding the survey, only 28% of these women took their child to the clinic for treatment. 7. COMPLICATIONS OF PREGNANCY AND DELIVERY AND ABNORMALITIES IN THE NEWBORN; Among all last deliveries, 18% of the women had pregnancy complications and 9% of the women had complications during delivery About 5% of the women reported abnormality in their most recent newborn. 8. REPRODUCTION EFFICIENCY; PERINATAL MORTALITY AND INFANT MORTALITY Based on data from the pregnancy history in this survey, reproduction efficiency was estimated. Out of the 11,154 pregnancies reported by all women surveyed, foetal loss was 21% (almost 16% were induced abortions) and infant deaths before reaching one year old were 3.1%. The reproduction efficiency was, therefore, reduced to 76%. In terms of perinatal and infant mortality rates, the former was 40.2 per 1,000 total births and the latter was 39.3 per 1,000 live births. Both rates described J shaped relationships with age of mothers and parity, and they were also correlated with birth interval and mother's education. In summary, this baseline survey data indicated a need for (1) improving contraceptive practices with more effective methods to prevent unwanted pregnancies and (2) providing better services for maternal and child care to protect wanted pregancies. In the Korean rural setting. the author believes that the latter is more important as the value of each child has increased as a result of the family planning campaign for the past two decades. This calls for more effective integration of Family Planning and MCH programmes to meet the needs of the family in each stage of the child bearing and rearing period with deploying more qualified personnel than the current government program personnel.

• Economic and Environmental Geology
• /
• v.35 no.3
• /
• pp.241-255
• /
• 2002

The purpose of this study is to investigate environmental geochemical characteristics for the acid mine drainage and stream sediments in the abandoned Honam coal mine area. For the chemical analysis, stream winter samples were collected at 54 sites and for the mineralogical and chemical analysis, stream sediments samples were collected at 34 sites. Physical and chemical characteristics of stream water were measured at the site and chemical compositions were analyzed by ICP-AES, ICP-MS and IC. Mineralogical characteristics of stream sediments samples were determined using XRD, SEM and EDS. In physical and chemical properties, stream water shows thats pH 2.85~8.12, Eh -62~215 mV, EC 0.205~146 ms/m, ER 0.234~255 {$\Omega}{\cdot}$m, DO 0.03~1068 mg/L and TDS 10.96~1420mg/L. In chemical compositions, we obtain that K 0.118~3.184 mg/L, Mg 2.1~114.48 mg/L, Ca 2.59~l25.02 mg/L, Al 0.01~44.72 mg/L, Fe 0.108~89.49 mg/L and Na 5.45~125.41 mg/L. Stream sediments are commonly composed of quartz, illite and goethite in the result of x-ray diffraction. After heat treatment at 98$0^{\circ}C$, the hematite peaks are distinctly shown. In consideration of heavy metals (include Fe) for steam sediments, Fe ranges 22575~34713 ppm, Zn 41.66~970.3 ppm, Cd 0.52~52.07 ppm, Cu 1.25~198.5 ppm and Pb 0.43~77.35 ppm.