• Journal of Animal Environmental Science
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2009

This study was conducted to analyze the effects of sow breeding environment on the reproduction in the first litter in a large-sized hog farm, located in Dangjin-gun, Chungnam from July 1st, 2007 to June 30th, 2008 and provide basic information to improve the sow productivity in a family farming sows. The results obtained were as follows; 1. The gestation periods were proved to be similar without significant differences between indoor and outdoor breeding grounds, The average of farrowing rate was 91.91%, and 92.54% farrowing rate of out-door ground breeding sows was slightly greater than 91.57% of group-housed sows, but there was no significance between two groups. 2. The average of total litter size and the number of born alive per litter were 9.81 and 9.02, respectively. The number of total number was 0.98 and the number of born alive per litter was 1.18 in the outdoor-ground breeding sows, which was significantly greater than group-housed sows(p<0.001). 3. The number(rate) of piglets stillborn was 0.22(2.10%) from the outdoor-ground breeding sows was significantly greater, compared with 0.33(3.53%) from group-housed sows(p<0.01). The number of piglets culled was 0.23(2.27%) and 0.26(2.77%), in the out-door ground breeding sows and in group-housed sows, respectively and it was not significantly similar between two groups. And, the number of mummies was 0.21(2.1%) and 0.28(2.29%), in the out-door ground breeding sows and in group-housed sows, respectively, which showed no significance. 4. The weaning number in the playground breeding sows was 9.48 and it was significantly greater than that in the group-housed sows(p<0.001). The average of weaned age was observed to be 22.91 days. The weaned age in the out-door ground breeding sows was 22.39 days, and it was significantly smaller than that in group-housed sows(p<0.001). The breeding rate for the weaning of pigs was satisfactory as 96.82%, but there was no significant difference between two groups.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.1
• /
• pp.26-33
• /
• 1989

This pot experiments were conducted to find out the optimal fertilization ratios of the N:S:P anions and K:Ca:Mg cations of major nutrients in an orchardgrass/ladino clover mixed sward. The optimum ratios in equivalent basis were computed by the Homes systematic variations technique. The soil samples were collected from the newly reclaimed soils, which are located on colluvial hilly area with a good consideration for the hilly pasture development. The results were summarized as follows; 1, the optimum fertilization ratios of major nutrients for the high yields by the forage species in a mixed sward were obtained (Table 4 in detail); N:S:P = 3:l: 1 and K:Ca:Mg = 1:l: 1 for grass and grass plus legume, and N:S:P = 1:6:43 and K:Ca:Mg = 1: 3: 1 for legume in general. 2. The yield increases from the systematic variations in this mixed sward were laid in following order; N > P >S-group and K >Mg >Ca-group for grass and grass plus legume, and P >S >N-group and Ca >Mg > K-group for legume. Especially, the yields were greatly increased at the N-group for grass, and at the Pand Ca-groups for legume. 3. Soil pH-value was descreased at the Sgroup, and somewhat increased at the Ca- and Mg-groups. The content of available $P_2O_5$, CEC and base saturation were greatest with the Ca-group. 4. At the N-group, the N-contents were highest and the P-contents were lowest in grass and grass plus legume, which resulted in the highest Ca/P ratio of 2.15 among the anion groups. Whereas the highest Ca/P ratio of 9.20 in legume was obtained at the Ca-group. Legume showed in general higher Ca/P ratio and lower K/(Ca+Mg) ratio than these in grass. 5 . There were differences in the effects of systematic variations of major nutrients on the dry matter yields and the mineral yields. The optimum fertilization ratios of anions and cations for the high mineral yields were obtained (Table E), which showed differences comparing with the ratios for the high dry matter yields. The antagonis between the cations K and Mg was known from the point of mineral yields of mixed forages.

• Journal of Nutrition and Health
• /
• v.41 no.8
• /
• pp.776-785
• /
• 2008

Maternal stress was one of the common symptoms that pregnant women could have experienced during pregnant period. The purpose of this study was to investigate the relation of maternal stress with maternal nutrients intake and pregnancy outcome. Subjects were 248 pregnant women and were recruited at two hospitals in Seoul area. Individual stress levels were divided by the stress scores (total 41 scores), as low stressed group (< 12) and high stressed group (${\geqq}12$). The social characteristics, nutrient intake, anthropometric measurements and pregnancy outcome were compared between low stressed group (LSG) and high stressed group (HSG) to recognize risk factor of maternal stress. We found that subjects experience stress by various factors which were concern about newborn (40.4%), concern about health (28.8%), economic difficulties (13.2%), depress (10.1%), family relationship (2.9%), concern of house work (2.5%), human relationship (2%). In HSG, unemployed rate (p < 0.05) and pre-pregnancy BMI (p < 0.05) were higher than in LSG. Family size in HSG was larger than that in LSG (p < 0.01). Doing regular exercise with the light activity level was significantly higher in LSG (p < 0.05). The nutrient intake in LSG was slightly higher than that in HSG, but not statistically significant. Pregnancy outcome was not significantly affected by the maternal stress. In conclusion, the risk of maternal stress may be related with a life style during pregnancy. Therefore, life style for maternal stress control, such as weight control and regular exercise is recommended to prevent maternal stress.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.1-6
• /
• 1976

This paper is the third one of the study on balanced type oscillating mole-drainer, the first one was presented in No 9. Gyeongsang College Report and the second one in Vol. 17, No.4 of the KSAE. In the first part of this study, the characteristics of traction forces between the nonoscillating earth working equipments and oscillating ones was compared. A model of the balanced type oscillating mole-drainer, which composed of a mechanism that may reduce the machine vibration, was designed following the dimensional analysis and similitude technique. The model test was carried out to clarify the balancing mechanism of the oscillating parts and other parts of the machine. In the light of the results from the model tests, a prototype machine was made for experimental purpose. Results from the field test by a reported in the near future. In the second report, the model tests were carried out under the same soil conditions, i.e, . oscillating frequency, running velocity, and oscillating amplitude, etc. It was clear that use of balanced type oscillating model could substantially reduce the vibration of the whole system of the machine, when compared with the nonoscillating type model. In this paper(the third report), results of investigation on the traction force, power requirement, and moment. etc, is presented. Analysis of variance technique was used for analyzing the effect of the frequency, amplitude, and running velocity on the draft force, torque, power requirements, and moments. The results obtained from the model tests are as follows, 1) By practicing a balanced-type oscillating mole-drainer, it was possible to reduce the traction resistance by 55.1-61. 2 percent of traction resistance, however, was 1.75 - 1.95 times greater than the value of resistance which was induced by use of a mole-drainer with single bullet. The resistance of rear shank against soil was considered as a main causing factor of the above results. 2) As the oscillation frequency was increased, the traction resistance was decreased. Considering on the effect of oscillation the greater the amplitude, and the slower the running velocity was, the greater the reduction ratio of traction resistance was. 3) The ratio of the traction resistance of oscillating mole-drainer to that of non-oscillating one could be represented as a function of dimensionless variable (V/$Af$). The results from the tests were well agreed with the reported results from the experim ents on oscillation plow or hoe. 4) By taking a lower value of (V/$Af$), reducing the traction resistance was possible. This fact meant, however, that the efficiency of mole drain practice would be lower. 5) It was experimentally confirmed under the same condition of soil that the variable (R/$rD1^3$) could be represented as a function of a variable($V^2/gD$) when a non\ulcornerocillating mole-drainer was used. 6) When a oscillating mole-drainer was used, the variable(R/$rD_1^{3}$) could be represented as a function of two variables ($v^2/gD_1$) and (V^2/gD_1$). 7) The torque was not affected by a change of frequency. However, a relation of proportionality existed between torque and amplitude, running velocity, and ratio of bullet diameter. When a balanced type oscillating mole-drainer with two bullets was used, torque was increased by 52.8-78. 4 percent and total power requirement was also increased. 8) Total power requirement was increased linearly in accordance with the increasing frequency, 41.96 percent of total power was used for oscillating action. The magnitude of total power requirement was 1. 8-9. 4 times greater than that of a non-oscillating mechanism. In the view point of power requirement, it was not advisable to increase the frequency, amplitude, running velocity, and ratio of bullet diameter at the same time. 9) Only the positive moment occured in the rear shank. Change of the diameter of a rear bullet, could not affect the balancing against the soil resistance. It was necessary for rear bullet to have a large resistance against soil only when the rear bullet was in backward motion. 10) Within an extent of the experimental base, optimum limits for several design factors were A=0.5cm, $f$=22.5Hz, V=O. 05m/sec, and $\lambda$=1.0 By adapting these values traction resistance was reduced by 40 percent and vibration acceleration wa s reduced by 60 percent. Even though the total , power requirements for operating a balanced type oscillation mechanism was greater ~than that of non-oscillating one, using a oscillating mechanism would be more effective. Because a balanced type oscillating mechanism is used, tractive resistance will be reduced and then the lighter . tractive equipment could be used.

• Journal of Bio-Environment Control
• /
• v.8 no.4
• /
• pp.257-264
• /
• 1999

The trickling system for automatic and individual watering were made with Bunchungto, Ongito and Backjato. The thickness of ceramics were 1.0, 1.5, 2.0, 2.5 and 3.0mm. And they were fired in a muffle furnace at five different temperatures between 500 and 900'E during 12 hours. The upper plastic parts of sensor consisted of five elements made by steel mold. With the photo fiber sensor attached to datalogger, an accumulated amount of drops for every 10 minutes were recorded. The porosity is higher in the order of Bunchungto, Backjato and Ongito; also, as the firing temperature is higher and the thickness is thicker, the porosity is higher. The ceramic sensors consisted of $SiO_2$ of 54.17~71.62wt.%, A1$_2$ $O_3$ of 15.42~33.79wt.% and the rest of 10wt.%, those were Fe$_2$ $O_3$, CaO, MgO, Na$_2$O, $K_2$O, Ti $O_2$, P$_2$ $O_{5}$. The pattern of dropping were changed according to the variety, thickness and firing temperature of ceramics. As the ceramics were made thicker, the fluctuation of dropping became more rapid, but it did not regularly work at 1mm thickness. As the firing temperature of ceramics became higher, the fluctuation of dropped amount became more rapid.

• Korean Journal of Environmental Biology
• /
• v.26 no.2
• /
• pp.57-65
• /
• 2008

The effects of light quality and irradiance on the growth of centric diatom, Skeletonema costatum (Jinhae Bay strain) were investigated in the laboratory. At 20$^{\circ}C$ and 30 psu, the irradiance-growth curve showed the maximum growth rate of 1.17 day$^{-1}$ with half-saturation photon flux density (PFD) (K$_s$) of 92.4 $\mu$mol photons $m^{-2}s^{-1}$, $\mu$=1.17 (I-5.28)/(I+81.8), (r=0.98), and a compensation PFD (I$_0$) was 5.28 $\mu$mol photons $m^{-2}s^{-1}$. The 10 equated to a depth of 3$\sim$5 m from March to May, 11 m in June and 4 m from July to September in Jinhae Bay. These responses suggested that irradiance at the depth near the surface layer in Jinhae Bay would provide favorable conditions for S. costatum. To assess the effects of light (i.e. wavelengths) on the growth, nine wave-lengths were used ranging from near ultraviolet to near-infrared supplied by light emitting diode. At an irradiance level of 25 $\mu$mol photons $m^{-2}s^{-1}$, S. costatum grew under wavelengths of 405, 470, 505, 525, 568 and 644 nm, but did not grow at 590 and 623 nm; whereas S. costatum grew at all wavelengths at 100 $\mu$mol photons $m^{-2}s^{-1}$. This implies that S. costatum is likely to grow well in enclosed water bodies where suspended particles absorbs most of the blue wavelengths, and dominated by yellow-orange wavelengths.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.25 no.3
• /
• pp.159-168
• /
• 2005

This experiment was carried out during the period from May to October 1998 to determine the effect of fermented sawdust swine manure application (SSM) on the herbage production of Japanese millet and soil properties in the Cheju brown volcanic ash soil. The randomized block design (T1 : basic chemical fertilizer, N 200 kg/ha + $P_2O_5\;300 kg/ha+K_2O$ 200kg/ha ; T2 : 1/2 basic chemical fertilizer, N $100+P_2O_5\;150+K_2O$ 100kg/ha; T3 : 1/2 basic SSM, N 100kg/ha, T4:basic SSM, N 200kg/ha; T5:2 times basic SSM, N 400 kg/ha ; T6:4 times basic SSM, N 800 kg/ha) was used. At the same application level of nitrogen 200kg/ha, the application of $100\%$ chemical fertilizer (T1) had significantly lower dry matter yield than that of $50\%$ chemical fertilizer and $50\%$ SSM (T2) or $100\%$ SSM (T4)(p<0.01). Dry matter yield increased with an increase of SSM application to N 400kg/ha level but decreased at N 800 kg/ha level. P, K and Ca contents of Japanese millet tended towards to decrease with an increase of SSM level. The application of chemical fertilizer lowered P and K content of Japanese millet in comparison with that of SSM (p<0.05). pH, available phosphorus. exchangeable potassium, Ca and Mg content of soil studied showed a significant increase with an increase of SSM application level (p<0.05). However, at the same application level of N 200kg/ha, there was statistically no significant difference between chemical fertilizer and SSM in those contents of soil after experiment. The bacterial number of soil among microbial population increased with an increase of SSM level, in June, 1998 (p<0.05), but there was no regular tendency, in October. The rate of bacteria to fungus in soil had a tendency to decrease with an increase of SSM level. In conclusion, it is recommended to use N 400kg/ha of SSM or N 100 kg/ha of chemical fertilizer+N 100 kg/ha of SSM for Japanese millet.

• Korean Journal of Food Science and Technology
• /
• v.49 no.5
• /
• pp.550-558
• /
• 2017

The effect of Artemisia argyi H. under liquid-state fermentation by Monascus purpureus (AAFM) on cognitive impairments has been studied in a mice model of diabetes-associated cognitive decline induced by streptozotocin (STZ). C57BL/6 mice (9 weeks of age, male) were separated into four groups: a normal control, STZ-induced diabetic mouse group (STZ group), Artemisia argyi H. (AA) 10 group (diabetic mouse+AA 10 mg/kg/day), AAFM 10 group (diabetic mouse+AAFM 10 mg/kg/day). Administration of AA and AAFM significantly improved glucose tolerance, as shown by the intraperitoneal glucose tolerance test (IPGTT), and ameliorated cognitive deficit, as shown by the behavioral tests including passive avoidance, Morris water maze, and Y-maze tests. After behavioral tests, the cholinergic system was examined by assessment of the acetylcholine (ACh) level and acetylcholinesterase (AChE) inhibitory activity, and the antioxidant system was also assessed by measuring malondialdehyde (MDA) and superoxide dismutase (SOD) levels in the brain and liver.

• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.1
• /
• pp.13-18
• /
• 2004

This study was designed to establish working range for reoportable range in own laboratory in order to cover the upper and lower limits of the range in test method. We experimented ten times during 10 days for setting of reportable range with between run for method evaluation. It is generally assumed that the analytical method produces a linear response and that the test results between those upper and lower limits are then reportable. CLIA recommends that laboratories verify the reportable range of all moderate and high complexity tests. The Clinical Laboratory Improvement Amendments(CLIA) and Laboratory Accreditation Program of the Korean Society for Laboratory Medicine states reportable range is only required for "modified" moderately complex tests. Linearity requirements have been eliminated from the CLIA regulations and from others accreditation agencies, many inspectors continue to feel that linearity studies are a part of good lab practice and should be encouraged. It is important to assess the useful reportable range of a laboratory method, i.e., the lowest and highest test results that are reliable and can be reported. Manufacturers make claims for the reportable range of their methods by stating the upper and lower limits of the range. Instrument manufacturers state an operating range and a reportable range. The commercial linearity material can be used to verify this range, if it adequately covers the stated linear interval. CLIA requirements for quality control, must demonstrate that, prior to reporting patient test results, it can obtain the performance specifications for accuracy, precision, and reportable range of patient test results, comparable to those established by the manufacturer. If applicable, the laboratory must also verify the reportable range of patient test results. The reportable range of patient test results is the range of test result values over which the laboratory can establish or verify the accuracy of the instrument, kit or test system measurement response. We need to define the usable reportable range of the method so that the experiments can be properly planned and valid data can be collected. The reportable range is usually defined as the range where the analytical response of the method is linear with respect to the concentration of the analyte being measured. In conclusion, experimental results on reportable range using concentrated control sample and zero calibrators covering from highest to lowest range were salicylate $8.8{\mu}g/dL$, phenytoin $0.67{\mu}g/dL$, phenobarbital $1.53{\mu}g/dL$, primidone $0.16{\mu}g/dL$, theophylline $0.2{\mu}g/dL$, vancomycine $1.3{\mu}g/dL$, valproic acid $3.2{\mu}g/dL$, digitoxin 0.17ng/dL, carbamazepine $0.36{\mu}g/dL$ and acetaminophen $0.7{\mu}g/dL$ at minimum level and salicylate $969.9{\mu}g/dL$, phenytoin $38.1{\mu}g/dL$, phenobarbital $60.4{\mu}g/dL$, primidone $24.57{\mu}g/dL$, theophylline $39.2{\mu}g/dL$, vancomycine $83.65{\mu}g/dL$, valproic acid $147.96{\mu}g/dL$, digitoxin 5.04ng/dL, carbamazepine $19.76{\mu}g/dL$, acetaminophen $300.92{\mu}g/dL$ at maximum level.

• Food Science of Animal Resources
• /
• v.28 no.5
• /
• pp.610-615
• /
• 2008

This experiment was conducted to investigate the effects of drinking of Rhus tree-extract on laying performance and egg quality in hens. Four hundred eighty, 55-wk-old ISA brown, laying hens were divided into six groups, control, Rhus tree-extract 500 ppm, 1,000 ppm, 2,000 ppm, 3,000 ppm and 5,000 ppm. The hens were fed a supplemented drink containing Rhus tree-extract for 12 weeks. Egg production and egg mass increased by drinking Rhus tree-extract (p<0.05) and the feed conversion ratio also improved in Rhus tree-extract groups. Cecal numbers of Lactobacillus spp., E. coli and Salmonella were not different in treatments. Availability of protein and ash improved in the Rhus extract groups. The eggshell breaking strength and egg shell thickness were significantly increased in Rhus tree-extract 3,000 ppm and Rhus tree-extract 2,000 ppm groups compared to the other groups. Also, egg yolk color and Haugh unit were significantly improved by the dietary Rhus tree-extract (p<0.05).