• Journal of Sericultural and Entomological Science
• /
• v.2
• /
• pp.49-61
• /
• 1962

The insect Diplosis mori Yokoyama is causing extensive destruction of mulberry trees in Korea with a resultant loss in silk production. This study was made to determine an effective method of control. Methods and Materials Used Preliminary studies were made to determine more exactly the life cycle of the insect. Based on this information, various control measures were tested, including the use of spray methods with BHC and control of larvae by tilling. Results Obtained 1. Life cycle studies (a) In the Suwon area, this-insect has 5 generations per year. The first starts in the later part of June and the final cycle ends in the later part of September. (b) The adult insects appear about 7: 00-8: 00 P.M. and live for 2-5 days. Females live in longer periods than the male. (c) Larvae lives inside the second and third stipules (A. B.) before mulberry leaf development. They cause extensive damage to the leaves at the point where they are attached to the stem. (d) Weather conditions considerably affect the life cycle. The pupa particularly are affected and not be able to change into the moth stage when there is a long period of no rain. (e) Larvae are large......0.3 to 2.0mm......and are milky-white immediately after hatching but turn to pinkish as the worm matures. The matured worm has a jumping ability up to 15-20cm. The worm burrows into the ground 1.5 to 3.0 cm before changing into the pupal stage. (f) The pupal stage usually lasts 7-8 days, in summer weather conditions and the pupa is surrounded with a coarse cocoon. (g) These insects, as a general rule, overwinter as pupae but sometimes as larvae. 2. Control measures (a) BHC dust applied on the ground seem most effective. It should be done 4-5 days after the worm has burrowed into the ground. For this control, it is recommended that 6kg of a 2% formation Tanbo(l0ares) be used. (b) For the effective spraying against the fly, it is recommended that a formulation of liquid BHC spray terials be used at the rate of 400-600 liters per Tanbo. (c) Tillage methods which provide a cover of soil 5cm or more in depth above infested areas will effect-maively prevent the emergence of the fly from the pupal stage. 3. Conclusions Methods of control against Diplosis mori Yokoyama can be tied more closely to the life cycle of the insect with more effective results. Further studies are needed to complete information on possible controls during or after hibernation. Economic studies on the cost of these control measures are also needed.

• Food Science of Animal Resources
• /
• v.25 no.4
• /
• pp.391-396
• /
• 2005

The objective of this study was carried out investigate the changes of carcass characteristics, physico-chemical characteristics and fatty acid composition in crossbred pigs (Korean native breed ${\times}$ Landrace breed) by backfat thickness. A total 182 Pigs were divided into 3 groups by there backfat thickness, i.e., <11.80mm, $11.80\~25.01mm\;and\;25.01mm<.$ The live weight carcass weight and dressing percent of backfat thickness 25.01mm< group were higher compared to those for backfat thickness <11,80mm and $11.80\~25.01mm group, but the final grade were lower. The pH of backfat thickness 25.01mm< group were higher compared to those for backfat thickness <11.80mm and $11.80\~25.01mm$ group. Shear lone of 25.01 mm< group were lower than that of other groups. Water, crude fat content and cooking loss have no difference between the 3 groups. The hardness of backfat thickness 25.01mm< group were higher compared to those for backfat thickness <11.80mm and $11.80\~25.01mm$ group. The yellowness $(b^*)$ of meat and fat color in backfat thickness 25.01mm< group were lower compared to those for backfat thickness <11.80mm and $11.80\~25.01mm$ group. The stearic acid and saturated fatty acid content were higher compared to those for backfat thickness <11.80mm and $11.80\~25.01mm$ group but the linoleic acid and unsaturated fatty acid content were lower.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.2
• /
• pp.113-120
• /
• 2005

An understanding of soil-structure interaction is the key to rational and economical design for laterally loaded drilled shafts. It is very difficult to formulate the ultimate lateral capacity into a general equation because of the inherent soil nonlincarity, nonhomogeneity, and complexity enhanced by the three dimensional and asymmetric nature of the problem though extensive research works on the behavior of deep foundations subjected to lateral loads have been conducted for several decades. This study reviews the four most well known methods (i.e., Reese, Broms, Hansen, and Davidson) among many design methods according to the specific site conditions, the drilled shaft geometric characteristics (D/B ratios), and the loading conditions. And the hyperbolic lateral capacities (H$_h$) interpreted by the hyperbolic transformation of the load-displacement curves obtained from model tests carried out as a part of this research have been compared with the ultimate lateral capacities (Hu) predicted by the four methods. The H$_u$ / H$_h$ ratios from Reese's and Hansen's methods are 0.966 and 1.015, respectively, which shows both the two methods yield results very close to the test results. Whereas the H$_u$ predicted by Davidson's method is larger than H$_h$ by about $30\%$, the C.0.V. of the predicted lateral capacities by Davidson is the smallest among the four. Broms' method, the simplest among the few methods, gives H$_u$ / H$_h$ : 0.896, which estimates the ultimate lateral capacity smaller than the others because some other resisting sources against lateral loading are neglected in this method. But it results in one of the most reliable methods with the smallest S.D. in predicting the ultimate lateral capacity. Conclusively, none of the four can be superior to the others in a sense of the accuracy of predicting the ultimate lateral capacity. Also, regardless of how sophisticated or complicated the calculating procedures are, the reliability in the lateral capacity predictions seems to be a different issue.

• Women's Health Nursing
• /
• v.8 no.2
• /
• pp.232-243
• /
• 2002

The purpose of this study was to examine factors influencing the meaning of life for middle-aged women. The subjects for the study were 190 middle-aged women who live in Busan. Data were collected from May 25 to June 20, 1999. The instruments for this study were as follows : the meaning of life scale developed by Jung D. R(1978) ; the self-esteem scale developed by Ro, E. Y, Kwon, J. H.(1997) ; the volunteer activity scale developed by Park G. J.(1999), the marital satisfaction scale developed by Choi G. Y.(1999) ; and the health status scale developed by Kim S. Y. (1991). SPSS PC+ was utilized for data analysis. Data were analysed according to frequency and percentage, mean and standard deviation, t-test, ANOVA, Sheffe' s test and Pearson' s correlation coefficients and stepwise multiple regression. The reliability of the tools was tested by Cronbach's $\alpha$ : and it showed reliability scores of 0.88(for the meaning of life tool), 0.81(for the self-esteem tool), 0.94(for the marital satisfaction tool) and 0.78(for the health status tool). The results were as follows: 1) The scores showed that middle-aged women had a moderate level of meaning of life, with a mean of 30.31 and standard deviation of 6.24 (with values ranging from 12.00 to 48.00). The scores showed that middle-aged women had a moderate levels of self-esteem, with a mean of 28.92 and standard deviation of 4.67 (with values ranging from 10.00 to 40.00). The scores showed that middle-aged women had a very low level of volunteer activity, with a mean of 0.87 and standard deviation of 0.93(with values ranging from 0.00 to 1.00). The scores showed that middle-aged women had a moderate level of satisfaction in their marriages, with a mean of 31.99 and standard deviation of 7.84(with values ranging from 12.00 to 48.00). The scores showed that middle-aged women had a moderate level of health status, with a mean of 6.63 and standard deviation of 1.57(with values ranging from 3.00 to 9.00). 2) There was a statistically significant difference of the meaning of life of middle-aged women according to their religion(F=8.930, p=.000), christian ($31.94{\pm}5.96$) had more meaning th life than buddhists ($28.40{\pm}6.23$). 3) There was a statistically significant correlations between the subject' s self-esteem and the her meaning of life(r=0.477, p=0.000), the subject' s level of volunteer activity and meaning of life(r=.428, p=.000), her level of marital satisfaction and meaning of life(r=.417, p=.000), and her level of health status and meaning of life(r=.261, p=.000) among these middle-aged women. 4) Self- esteem was the highest factor influencing the level of meaning of life in middle-aged women. 40.0% of the total variance of levels of meaning of life by was dependent on self-esteem, volunteer activity, marital satisfaction and health status. In conclusion, the higher the self-esteem and levels of volunteer activity, marital satisfaction, and health status of middle-aged women, the higher the meaning of life for them. Therefore, it is necessary to elevate levels of the self-esteem and volunteer activity, marital satisfaction and health status in order to help middle-aged women have more meaning of life.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.476-476
• /
• 2014

서론: 저 전력 소모를 필요로 하는 무선 센서 네트워크 관련 기술의 급격한 발달과 함께 자체 전력 수급을 위한 진동 에너지 수확 기술에 대한 연구가 활발히 이루어지고 있다. 다양한 구조와 소재를 압전 외팔보에 적용하여 제안하고 있다. 그 중에서도 진동 기반의 에너지 수확 소자는 주변 환경에서 쉽게 진동을 얻을 수 있고, 높은 에너지 밀도와 제작 방법이 간단하다는 장점을 가지고 있어 많은 분야에 응용 및 적용 가능하다. 기존 연구에서는 2차원적으로 진동 에너지 수확을 위한 휜 구조의 압전 외팔보를 제안 하였다. 휜 구조를 갖는 압전 외팔보는 각각의 짧은 두 개의 평평한 외팔보가 일렬로 연결된 것으로 볼 수 있다. 하나의 짧고 평평한 외팔보는 진동이 가해지면 접선 방향으로 응력이 생겨 최대 휨 모멘텀을 갖게 된다. 그러므로 휜 구조를 갖는 외팔보는 진동이 인가됨에 따라 길이 방향과 수직 방향으로 진동한다. 하지만, 이 구조는 수평 방향으로 가해지는 진동에 대한 에너지를 수확하기에는 한계점을 가진다. 즉, 3축 방향에서 임의의 방향에서 진동 에너지를 수확하기는 어렵다. 본 연구에서는 3축 방향에서 에너지를 효율적으로 수확할 수 있도록 헤어-셀 구조의 압전 외팔보 에너지 수확소자를 제안한다. 제안된 소자는 길이 방향과 수직 방향뿐만 아니라 수평 방향으로도 진동하여 임의의 방향에서 진동 에너지를 수확할 수 있다. 구성 및 공정: 제안하는 소자는 3축 방향에서 임의의 진동을 수확하기 위해서 길이를 길게 늘이고 길이 방향을 따라 휘어지는 구조의 헤어-셀 구조로 제작하였다. 외팔보의 구조는 외팔보의 폭 대비 길이의 비가 충분히 클 때, 추가적인 자유도를 얻을 수 있다. 그러므로 헤어-셀 구조의 에너지 수확 소자는 기본적인 길이 방향, 수직방향 그리고 수평방향에 더불어 추가적으로 뒤틀리는 방향을 통해서 3차원적으로 임의의 주변 진동 에너지를 수확하여 전기적인 에너지로 생성시킬 수 있다. 제작된 소자는 높은 종횡비를 갖는 무게 추($500{\times}15{\times}22{\mu}m3$)와 길이 방향으로 길게 휜 압전 외팔보($1000{\times}15{\times}1.7{\mu}m3$)로 구성되어있다. 공정 과정은 다음과 같다. 먼저, 실리콘 웨이퍼 위에 탄성층을 형성하기 위해 LPCVD SiNx를 $0.8{\mu}m$와 LTO $0.2{\mu}m$를 증착 후, 각각 $0.03{\mu}m$과 $0.12{\mu}m$의 두께를 갖는 Ti와 Pt을 하부 전극으로 스퍼터링한다. 그리고 Pb(Zr0.52Ti0.48)O3 박막을 $0.35{\mu}m$ 두께로 졸겔법을 이용하여 증착하고 상부 Pt층을 두께 $0.1{\mu}m$로 순차적으로 스퍼터링하여 형성한다. 상/하부 전극은 ICP(Inductively Coupled Plasma)를 이용해 건식 식각으로 패턴을 형성한다. PZT 층과 무게 추 사이의 보호막을 씌우기 위해 $0.2{\mu}m$의 Si3N4 박막이 PECVD 공정법으로 증착되고, RIE로 패턴을 형성된다. Ti/Au ($0.03/0.35{\mu}m$)이 E-beam으로 증착되고 lift-off를 통해서 패턴을 형성함으로써 전극 본딩을 위한 패드를 만든다. 초반에 형성한 실리콘 웨이퍼 위의 SiNx/LTO 층은 RIE로 외팔보 구조를 형성한다. 이후에 진행될 도금 공정을 위해서 희생층으로는 감광액이 사용되고, 씨드층으로는 Ti/Cu ($0.03/0.15{\mu}m$) 박막이 스퍼터링 된다. 도금 형성층을 위해 감광액을 패턴화하고, Ni0.8Fe0.2 ($22{\mu}m$)층으로 도금함으로써 외팔보 끝에 무게 추를 만든다. 마지막으로, 압전 외팔보 소자는 XeF2 식각법을 통해 제작된다. 제작된 소자는 소자의 여러 층 사이의 고유한 응력 차에 의해 휨 변형이 생긴다. 실험 방법 및 측정 결과: 제작된 소자의 성능을 확인하기 위하여 일정한 가속도 50 m/s2로 3축 방향에 따라 입력 주파수를 변화시키면서 출력 전압을 측정하였다. 먼저, 소자의 기본적인 공진 주파수를 얻기 위하여 수직 방향으로 진동을 인가하여 주파수를 변화시켰다. 그 때에 공진 주파수는 116 Hz를 가지며, 최대 출력 전압은 15 mV로 측정되었다. 3축 방향에서 진동 에너지 수확이 가능하다는 것을 확인하기 위하여 제작된 소자를 길이 방향과 수평 방향으로 가진기에 장착한 후, 기본 공진 주파수에서의 출력 전압을 측정하였다. 진동이 길이방향으로 가해졌을 때에는 33 mV, 수평방향으로 진동이 인가되는 경우에는 10 mV의 최대 출력 전압을 갖는다. 제안하는 소자가 수 mV의 적은 전압은 출력해내더라도 소자는 진동이 인가되는 각도에 영향 받지 않고, 3축 방향에서 진동 에너지를 수확하여 전기에너지로 얻을 수 있다. 결론: 제안된 소자는 3축 방향에서 진동 에너지를 수확할 수 있는 에너지 수확 소자를 제안하였다. 외팔보의 구조를 헤어-셀 구조로 길고 휘어지게 제작함으로써 기본적인 길이 방향, 수직방향 그리고 수평방향에 더불어 추가적으로 뒤틀리는 방향에서 출력 전압을 얻을 수 있다. 미소 전력원으로 실용적인 사용을 위해서 무게추가 더 무거워지고, PZT 박막이 더 두꺼워진다면 소자의 성능이 향상되어 높은 출력 전압을 얻을 수 있을 것이라 기대한다.

• Korean Journal of Microbiology
• /
• v.30 no.4
• /
• pp.322-331
• /
• 1992

In order to understand the transfer and behavior of R gene in water environments. the Kmr gene in the genetically modified microorganisms(GMMs) w,is studied by conjugation. The plasmid variously rearranged in the conjugants were comparatively analyzied by agarosc gel electrophoresis and the specific Km' genes in the gel were tletected with DNA probe. The Kmr genes of the GMM strains(DKC600 and DKC601) were transferred at higher rate than those of natural isola~e(DKI)b, ut the ratc was a little diflurent depending upon the recipient strains. Rearrangement of the plasmids appeared morc drastic in GMM strains than in IIKI as donor. The transfer frequencies of the Km' genes in LR broth were remarkably higher than in the water of AW and FW without regards to the strains. In LA breth. the frequencies of Kmr genes were higher at 25'C-30$^{\circ}$C than at 10$^{\circ}$C and at pH - 7 than pH 9, but temperature and pH of the FW did n,,t affect to the frequency. And the conjugants from GMM strains in FW did not showed any plasmids. except tor 43 kb plasmiil. As results of Southern analysis of the plasmid, variously rearranged in eonjugant cells obtained in LB broth, the Kmr genes were detected at the same position of Km' plasrnids of the donor cell(DK1 and GMM strains). But Km' plasmid disappeared in the conjugants obtained in F'W and their chronlosomes showed strong signal of hybridization. The Kmr plasmid of DKl in the conjugants obtained in FW water was transferred and maintained its size, but the Kmr plasinids of the GMM strains were all integrated into chromosome. Therefore, the Kmr plasmids of DKI anit GMM strains in LH were intactly transferred and other plasmitls were variously rearranged. but Km' gene of DKC600 in FW water was integrated into the chromosorn: without regards to the temperature and pH of the water.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.3
• /
• pp.231-239
• /
• 2013

Purpose: To design and fabricate the auto pattern maker for the development. Methods: we got the necessary data, needed in design, by using CAD. Based on the these data, we fabricated the trial product for the development of the auto pattern maker. Results: The auto pattern maker were composed with combinations of many elements; pattern making assembly, control panel, frame attachment and prober unit. The pattern making assembly was comprised of the cutter, the pattern holder, pattern remover and silence cover which could minimize the sound during the cutting process. The control panel was designed to be connected and operated with the main printed circuit board. The prober could get the eye shape data by scanning of 1.8 degrees around the groove of the frame through the encoding data according to the address. After starting, scanning was carried out in two passes, i.e. one right-handed and one left-handed. Communication connector could send the eye shape data from auto pattern maker to outer system with the RS232C transmission system. By using the one-way analysis of variance, we got the error rate of cut pattern size for ${\Phi}22mm$, ${\Phi}55mm$ and ${\Phi}62mm$. Because F-value was 0.510 and p-value was 0.601, no statistically significant differences were found. Also, the mean cutting error of the auto pattern maker was 0.0274 mm. Conclusions: we could succeed in making the trial product by applying it to the development of the auto pattern maker. The role of this auto pattern maker is to find a exact required size of lens to fit the frame by measuring the frame. The acquired data are transferred to outer system for grinding and finishing with patternless process. Also, the trial product can produce pattern to fit the frame. Therefore, it was confidently expected that the optometrists could handily produce pattern to fit the frame with this trial product and dispense the ophthalmic lens because of its efficiency and convenience compared to the past.

• Korean Journal of Pharmacognosy
• /
• v.7 no.3
• /
• pp.179-190
• /
• 1976

1. The Korean Acanthopanax genus includes 12 kinds consisting of 9 species and 3 forma. 2. The Korean Oga-pi which is on market sale has been used as bark for the medicinal purpose, and Oga-pi shall use Radicis Cortex. That is why it is basic rule that herbalogy shall use Radicis Cortex. 3. The origin of Oga-pi on sale is Acanthopanax sessiliflorum forma chungbunensis C.S. Yook. 4. $C_{HUNG}\;and\;N_AKAI'S}$ report on A. koreanum told us that there are brown hair on the mid-leaf junction, but in addition to it, our investigation was resulted in the fact that there are thorn along mid-rib sometimes. 5. 2 kinds of new forma are similar to A. sessiliflorum, but are different in the view-point of chemotaxonomy, compared with A. sessiliflorum. In its morphology, we can find some difference between 2 kinds of new forma and A. sessiliflorum. Our effort of examination on documents tell us that the all plants growing in the central part of our country is A. sessiliflorum forma chungbunensis C.S. Yook. The one which has thorn on both side among the plants collected in Mt. Dukyu, is called A. sessiliflorum forma nambunensis C.S. Yook. 6. A. sessiliflorum is growing in the southern part in Korea, and most Chungbu Oga-pi A. sessiliflorum forma chungbunensis in the central part of our country. For the convenience of our study, the key of Korean Acanthopanax plant is classified into, I-IV, as shown on the following items: I. No hair on both side of leaf A. Flower stalk is longer than petiole, and there are thorn under the petiole (5-7 stigma).${\cdots}A.\;sieboldianum$. B. Flower stalk is longer than petiole, or same length. The serration lie down, and the stem has short thorn (stigma is divided into 3 part).${\cdots\;\cdots}A.\;seoulense$ II. There are a lot of thorn or hair on back of leaf. A. A lot of thorn and hair on the vein of leaf back, and a number of small thorn on petiole.${\cdots}A.\;chiisanensis$. B. There are thorn on the vein of leaf back.${\cdots\;\cdots}A.\;sessiliflorum\;forma\;chungbunensis.$ III. There are hairs on both side of leaf. A. There are small hairs on the back of leaf.${\cdots\;\cdots}A.\;sessiliflorum.$ B. There are small hairs on both side of leaf.${\cdots\;\cdots}A.\;sessiliflorum\;f.\;nambunensis.$ C. There are thick hairs on junction of main vein on back of leaf.${\cdots\;\cdots}A.\;koreanum.$ D. There are brown hairs on vein of leaf back, and brown hairs on small petiole.${\cdots\;\cdots}A.\;rufinerve.$ E. There are shrunk hairs in grey-brown on back of leaf, and tense hairs on new branch (one stigma).${\cdots\;\cdots}A.\;divaricatum.$ IV. There are long thorn, just like needles, on the stem and petiole. A. Long needle grows on whole stem tensely, and long needles on petiole.${\cdots\;\cdots}A.\;senticosus.$ B. There are no needles, just like needles aid hairs on petiole, and needles grow on the stem thinly.${\cdots\;\cdots}A.\;asperatus.$ C. There are no needle on small brarch, leaf and inflorescence are larger than A. senticosus. ${\cdots\;\cdots}A.\;senticosus\;forma\;inermis.$.

• Applied Biological Chemistry
• /
• v.13 no.1
• /
• pp.105-109
• /
• 1970

Thiamin in the various materials which used for Takja braving was determined and its quantitative changes in the Takju mashes which were mashed with polished rice and wheat flour respectively using Nuruk only for the enzyme source, and with wheat flour and corn powder respectively using Nuruk and Koji, were checked at 24 hours intervals during the whole brewing period. The results obtained were as follows. a) The thiamin contents in 100 grams of each materials were: Polished rice 107.8${\gamma}$ Wheat Pour 185.0${\gamma}$ Corn powder 410.2${\gamma}$ Nuruk 347.4${\gamma}$ Koji of wheat flour 170.1${\gamma}$ Koji of corn powder 257.3${\gamma}$ b) About 40 to 50 percent of thiamin in the polished rice, wheat flour and, corn powder were losed by steaming at 10 wounds for 50 minutes. c) The quantitative changes of thiamin in the Takju meshes showed a similar tendency. Thiamin contents were decreased markedly during 2 days after mashing but thereafter, almost unchanged till the mashes were ripened. Its decreasing rates in tile two plots uses Nuruk and Koji wereless thaw those in the two plots used Nuruk only. d) Approximately 6${\gamma}$ of thiamin was determined in 100 ml. of the ripened mash of the rice plot and 7.5${\gamma}$ in tire whet flour plot in the case of using Nuruk only. 12.4${\gamma}$ of thiamin was determined in 100 ml. of the ripened mash of the wheat flour plot and 15.4${\gamma}$in the corn powder plot in the case of using Nuruk and Koji. e) It was assumed that 2.4 to 3.5${\gamma}$ of thiamin were contained in 100 ml. of finished Takju of the two plots used Nuruk only and 5 to 7${\gamma}$ in the two plots used Nuruk and Koji. f) About 43.7${\gamma}$ of thiamin were determined in 100 grams of Takju cake of the rice plot and 56.1${\gamma}$ in the wheat flour plat used Nuruk only, and 81.4${\gamma}$ in the corn powder plot and 57.7${\gamma}$ in the wheat flour plot used Nuruk and Koji.

• The Korean Journal of Nuclear Medicine
• /
• v.30 no.4
• /
• pp.548-559
• /
• 1996

A series of performance measurements of positron emission tomography (PET) were performed following the recommendations of the Computer and Instrumentation Council of the Society of Nuclear Medicine and the National Electrical Manufacturers Association. We investigated the performance of the General Electric $Advance^{TM}$ PET. The measurements include the basic intrinsic tests of spatial resolution, scatter fraction, sensitivity, and count rate losses and randoms. They also include the tests of the accuracy of corrections: count rate linearity correction, uniformity correction, scatter correction and attenuation correction. GE $Advance^{TM}$ PET has bismuth germanate oxide crystals (4.0mm transaxial ${\times}$ 8.1mm axial ${\times}$ 30.0mm radial) in 18 rings, which form 35 imaging planes spaced by 4.25mm. The system has retractable tungsten septa 1mm thick and 12cm long. Transaxial resolution was 4.92mm FWHM in 2D and 5.14mm FWHM in 3D at the center. Average axial resolution in 2D decreased from 3.91mm FWHM at the center to 6.49mm FWHM at R=20cm. Average scatter fraction of direct and cross slices was 9.57%. Dead-time losses of 50% corresponded to a radioactivity concentration of $4.86{\mu}Ci/cc$ and a true count rate of 519 kcps in 2D. The accuracy of count rate linearity correction was 1.84% at the activity of $4.50{\mu}Ci/cc$. Non-uniformity was 2.06% in 2D and 2.93% in 3D. Remnant errors after scatter correction were 0.55% in 2D and 4.12% in 3D. The errors of attenuation correction were 6.21% (air), 0.20% (water), -6.32% (teflon) in 2D and 5.00% (air), 6.94% (water), 3.01% (teflon) in 3D. The results indicate the performance of GE $Advance^{TM}$ PET scanner to be well suited for clinical and research applications.