• Title/Summary/Keyword: E-simulator

검색결과 381건 처리시간 0.034초

A Comparative Study and Analysis of LoRaWAN Performance in NS3

  • Arshad Farhad;Jae-Young Pyun
    • 스마트미디어저널
    • /
    • 제13권1호
    • /
    • pp.45-51
    • /
    • 2024
  • Long Range Wide Area Network (LoRaWAN) is a widely adopted Internet of Things (IoT) protocol due to its high range and lower energy consumption. LoRaWAN utilizes Adaptive Data Rate (ADR) for efficient resource (e.g., spreading factor and transmission power) management. The ADR manages these two resource parameters on the network server side and end device side. This paper focuses on analyzing the ADR and Gaussian ADR performance of LoRaWAN. We have performed NS3 simulation under a static scenario by varying the antenna height. The simulation results showed that antenna height has a significant impact on the packet delivery ratio. Higher antenna height (e.g., 50 m) has shown an improved packet success ratio when compared with lower antenna height (e.g., 10 m) in static and mobility scenarios. Based on the results, it is suggested to use the antenna at higher allevation for successful packet delivery.

GPS L1/갈릴레오 E1 복합신호처리를 통한 위치정확도 향상 연구 (A Study on Enhanced Accuracy using GPS L1 and Galileo E1 Signal Combined Processing)

  • 신천식;이상욱;윤동원
    • 한국위성정보통신학회논문지
    • /
    • 제6권1호
    • /
    • pp.68-74
    • /
    • 2011
  • 본 논문은 GPS L1신호와 갈릴레오 E1 신호를 복합 신호처리를 통한 위치정확도 성능향상 연구결과를 제시하였다. GNSS 수신기에서의 신호획득 및 추적과정의 성능 향상시키기 위해 복수개의 누적기, 판별기 및 루프 필터 모듈을 적용하였고, 소프트웨어 측정 결과와 하드웨어 측정결과를 성능 비교하였다, 또한 추적과정에 대한 성능비교는 정확도와 민감도 측면에서만 다루었으며 갈릴레오 E1 신호처리를 위한 DLL(Delay Lock Loop) 판별기는 power early late 타입을 적용하여 성능을 검증하였다.

IEEE 802.11e EDCF의 파라미터 분석 (Pameter Analysis of IEEE 802.11e EDCF)

  • 고동엽;박두진;임석구
    • 한국콘텐츠학회:학술대회논문집
    • /
    • 한국콘텐츠학회 2007년도 추계 종합학술대회 논문집
    • /
    • pp.611-614
    • /
    • 2007
  • IEEE 802.11e의 EDCF(Enhanced Distributed Coordination Function)는 무선 랜에서의 QoS(Quality of Service)를 지원하기 위해 표준화되었다. EDCF는 경쟁 기반 채널 접근 방식으로 기존의 DCF(Distributed Coordination Function)를 강화한 매체 접근 프로토콜로서 차별화된 AC(Access Category)를 가지고 있다. 본 논문에서는 IEEE 802.11e 네트워크에서 QoS에 영향을 미치는 파라미터인 AIFS(Arbitration Inter Frame Space), CWmax(Max Contention Window) 값을 변화함으로써 각 파라미터가 네트워크 성능에 미치는 영향을 평가하였다. 시뮬레이션 수행은 NS-2 (Network Simulator-2)를 이용하였으며, 성능 파라미터의 변화에 따른 네트워크 성능의 변화를 검증하였다.

  • PDF

도심지 토사재해 예방을 위한 3차원 시뮬레이션 개발(I) (Development of the 3D simulation for disaster prevention in the downtown soil erosion (I))

  • 신봉진;윤상호;이기동
    • 한국산학기술학회논문지
    • /
    • 제17권6호
    • /
    • pp.408-417
    • /
    • 2016
  • 최근 국내에서는 이상기온으로 인한 국지성 폭우와 여름철 태풍과 집중호우로 인한 다양한 재해 유형 중 산악지역을 중심으로 토사재해의 피해가 증가하는 추세이다. 국내 지형의 특성상 국토의 65% 이상이 산지로 형성되어 있어 개발이 필요하며 급격한 도시화로 인해 급경사지 및 산지가 도심지와 인접해 있다. 지속적인 도시화 산업화로 인하여 주거지 및 산업단지에 대한 피해가 지속적으로 증가하고 있으며, 도심지 인구밀도가 높은 우리나라는 토사재해 발생 시 그 피해 규모가 외국과 달리 크게 발생하고 있다. 최근 10년간(2001~2010년) 연평균 인명피해 68명, 재산피해 1조 7,044억원과 비교해 볼 때 인명피해는 20%, 재산피해는 25%, 수준으로 감소하는 것으로 보이지만, 도심지의 피해는 오히려 증가하고 있다. 이와 같은 도심지 토사재해를 예방하기 위해서는 도심지의 건물 등을 고려하여 시뮬레이션이 가능한 토사재해 3D 시뮬레이터 개발이 필요한 실정이다. 본 논문에서는 3D 시뮬레이터 개발을 위한 자료 수집 및 분석 및 현재까지 개발 된 시뮬레이터를 통해 실제 피해지역인 우면산의 피해상황을 가시화를 실시하여 시뮬레이터의 성능을 검증하였다.

A Bandwidth Estimation Scheme to Improve the QoE of HTTP Adaptive Streaming in the Multiple Client Environment

  • Kim, Sangwook;Chung, Kwangsue
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제12권1호
    • /
    • pp.308-324
    • /
    • 2018
  • HTTP adaptive streaming (HAS) is a promising technology for delivering video content over the Internet. HAS-based video streaming solutions rely on bandwidth estimation to select the appropriate video bitrate. Video streaming solutions that consider network conditions provide users with seamless video playback. However, when multiple clients compete for a common bottleneck link, conventional bandwidth estimation schemes that consider only one client overestimate the network bandwidth due to the ON-OFF traffic pattern. The bandwidth overestimation can cause Quality of Experience (QoE) degradation, such as unnecessary changes in video quality, and unfairness of video quality. In this paper, we propose a client-side bandwidth estimation scheme to obtain a better QoE of HAS in the multiple-client environment. The proposed scheme differentiates the client buffer status according to the buffer occupancy, and then estimates the available network bandwidth based on the buffer status and segment throughput. We evaluate the performance of HAS implemented in the ns-3 network simulator. Simulation results show that compared with the conventional schemes, the proposed scheme can enhance the QoE.

QFP 패키지의 새로운 고주파 등가 회로 모델 (New High-Frequency Equivalent Circuit Model for QFP Package)

  • 김성종;송상헌
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제54권7호
    • /
    • pp.339-342
    • /
    • 2005
  • We present a new high-frequency equivalent circuit model for 52pin QFP used in typical IC's and extract R, L, and C values of this circuit model using a 3-D E & M field simulator. Futhermore, L and C value variations as a function of Pin number due to the shape differences of the leads have been fitted to 2nd order polynomials in order to extend the applicability of this model.

주파수 분석을 통한 한국 전력계통의 관성상수 추정 (Estimation of Inertia Constant for Korean Power System by Frequency Analysis)

  • 박준희;여상민;김철환
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2009년도 제40회 하계학술대회
    • /
    • pp.207_208
    • /
    • 2009
  • 본 논문에서는 PSS/E(Power system simulator for engineering)를 이용하여 계통 내의 발전기 탈락을 모의하고, 모의 결과로 얻은 주파수의 변동을 이용하여 한국 전체 계통의 시스템 관성상수를 계산하고 특징을 분석하였다. 진동성분이 포함된 시간에 대한 주파수 파형에서 진동성분에 대한 영향을 억제하여 관성상수를 추정하기 위해 주파수 파형을 다항식의 형태로 근사화 하였다. 전체 전력계통은 총 11개의 지역으로 구분하였다. 각 구분된 지역에서의 시스템 관성상수를 추정하였다.

  • PDF

DTC방법을 사용한 nMOSFET의 공정파라메터 추출 및 소자특성에 관한 연구 (A study on process parameter extraction and device characteristics of nMOSFET using DTC method)

  • 이철인;장의구
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제9권8호
    • /
    • pp.799-805
    • /
    • 1996
  • In short channel MOSFET, it is very important to establish optimal process conditions because of variation of device characteristics due to the process parameters. In this paper, we used process simulator and device characteristics caused by process parameter variation. From this simulation, it has been ' derived to the dependence relations between process parameters and device characteristics. The experimental result of fabricated short channel device according to the optimal process parameters demonstrate good device characteristics.

  • PDF

단조중 냉간단조 금형세트의 구조해석 (Structural Analysis of Die Sets in Cold Forging)

  • 조흥석
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 1999년도 춘계학술대회논문집
    • /
    • pp.86-89
    • /
    • 1999
  • Structural analysis of die set in cold forging is conducted by the finite element method and the results are introduced in this paper. The problem formulation is introduced in detail. In the approach, amount of shrink fit is controlled by thermal load, i.e., temperature difference between die insert and shrink fits. The loading conditions are extracted automatically from a forging simulator. An application example is given.

  • PDF