• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.14-15
• /
• 2007

Proton irradiation technology was used for improvement of switching characteristics of the PT-IGBT. The proton irradiation was carried out at 5.56 MeV energy from the back side of processed wafers and at 2.39 MeV energy from the front side of the wafers. The on-state and off-state I-V characteristics and switching properties of the device were analyzed and compared with those of un-irradiated device and e-beam irradiated device which was conventional method for minority carrier lifetime reduction. The proton irradiated device by 5.56 MeV energy was superior to e-beam irradiated device for the on-state and off-state I-V characteristics, nevertheless turn-off time of proton irradiated device was superior to that of the e-beam irradiated device.

• 열처리공학회지
• /
• 제36권4호
• /
• pp.193-197
• /
• 2023

Transparent and conducting titanium (Ti) doped indium oxide (TIO) thin films were deposited on the poly-imide (PI) substrate with radio frequency magnetron sputtering and then electron irradiation was conducted on the TIO film's surface to investigate the effect electron irradiation on the crystallization and opto-electrical properties of the films. All x-ray diffraction (XRD) pattern showed two diffraction peaks of the In₂O₂ (431) and (444) planes with regardless of the electron beam irradiation energy. In the AFM analysis, the surface roughness of as deposited films was 3.29 nm, while the films electron irradiated at 700 eV, show a lower RMS roughness of 2.62 nm. In this study, the FOM of as deposited TIO films is 6.82 × 10^-3 Ω^-1, while the films electron irradiated at 500 eV show the higher FOM value of 1.0 × 10^-2 Ω^-1. Thus, it is concluded that the post-deposition electron beam irradiation at 500 eV is the one of effective methods of crystallization and enhancement of opto-electrical performance of TIO thin film deposited on the PI substrate.

• 한국축산식품학회지
• /
• 제30권4호
• /
• pp.603-608
• /
• 2010

This study investigated the effects of electron beam irradiation on pathogens, quality, and functional properties of shell eggs during storage. A 1st grade 1-d-old egg was subjected to electron beam irradiation at 0, 1, 2, and 3 kGy, after which the number of total aerobic bacteria, reduction of inoculated Escherichia coli and Salmonella Typhimurium, egg quality, and functional properties were measured. Electron beam irradiation at 2 kGy reduced the number of E. coli and S. Typhimurium cells to a level below the detection limit (<$10^2$ CFU/g) after 7 and 14 d of storage. Egg freshness as measured by albumen height and the number of Haugh units was significantly reduced by 1-kGy irradiation. The viscosity of irradiated egg white was also significantly decreased by increased irradiation, whereas its foaming ability was increased. Electron beam irradiation also increased lipid oxidation in egg yolks. These results suggest that electron beam irradiation reduces the freshness of shell eggs while increasing the oxidation of egg yolk and improving important functional properties such as foaming capacity. Electron beam irradiation can also be applied to the egg breaking process since the irradiation reduces the viscosity of egg white, which can allow egg whites and yolks to be separated with greater efficiency.

• Transactions on Electrical and Electronic Materials
• /
• 제9권5호
• /
• pp.202-205
• /
• 2008

We have studied the liquid crystal (LC) orientation behavior on the organic hybrid overcoat layer with ion beam irradiation. Excellent LC alignments of the nematic liquid crystal (NLC) on the ion beam irradiated organic hybrid overcoat layers were observed in various intensities above 600 eV. Pretilt angles of the NLC on the organic hybrid overcoat layers for all ion beam energy intensities were observed from 0.2 to 0.5 degrees. Also, we used the atomic force microscopy (AFM) images for measuring the roughness of the organic hybrid overcoat layers with ion beam irradiation before and after. The surface of organic hybrid overcoat layers was leveled off by the ion beam irradiation. Finally, a good LC alignment thermal stability on the organic hybrid overcoat layer with ion beam irradiation can be achieved.

• Bulletin of the Korean Chemical Society
• /
• 제35권10호
• /
• pp.2969-2973
• /
• 2014

A new process to fabricate a composite LSCF-Ag cathode material for SOFCs by electron beam (e-beam) irradiation process has been suggested for operation under intermediate temperature range of $600-700^{\circ}C$. A composite LSCF-Ag cathode with uniformly coated Ag nanoparticles on the surface of the LSCF material was prepared by a facile e-beam irradiation method at room temperature. The morphology of the composite LSCF-Ag material was analyzed using a TEM, FE-SEM, and EDS. The prepared composite LSCF-Ag material can play a significant role in increasing the electro-catalytic activities and reducing the operating temperature of SOFCs. The performance of a tubular single cell prepared using the composite LSCF-Ag cathode, YSZ electrolyte and a Ni/YSZ anode was evaluated at reduced operating temperature of $600-700^{\circ}C$. The micro-structure and chemical composition of the single cell were investigated using a FE-SEM and EDS.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.47-47
• /
• 2003

• 공업화학
• /
• 제25권2호
• /
• pp.227-232
• /
• 2014

전자빔조사와 과산화수소를 사용하여 알지네이트(sodium alginate, SA)를 저분자화 시키는데 1.0, 2.5 MeV의 전자빔 에너지가 이용되었으며, 저분자화 수율($G_s$), 분자량의 제어를 위해 2.5 ~ 20 kGy의 조사량, 0 ~ 4.5%의 과산화수소의 양을 조절하였다. 전자빔조사에 의한 저분자화 알지네이트(depolymerized sodium alginate, DSA)는 주로 1,4-glicoside결합이 끊어지며, C2-C3결합이 끊어지며 생기는 약간의 formate 말단을 가지며, 전자빔 조사 저분자화 저분자 알지네이트 말단(end group)의 화학적 구조가 단순하며, 고분자 알지네이트와 유사한 구조를 가짐을 알 수 있었다. 도입된 전자빔의 에너지와 조사량이 증가하면 알지네이트의 분자량은 감소하였으며, 알지네이트의 농도(2.0w/v%)로 높을 때 저분자화수율이 높았다. 특히 2% 알지네이트 수용액에 20 kGy (2MeV)의 조사량과 1.5% 과산화수소를 도입하였을 때 가장 큰 저분자화 수율($7.919{\times}10^4mol/J$)을 얻을 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제27권3호
• /
• pp.298-305
• /
• 2016

In this study, we treated pitch-based activated carbon fibers (ACFs) in hydrogen peroxide using electron beam (E-beam) irradiation to improve nitrogen monoxide (NO) sensing ability as an electrode material of gas sensor. The specific surface area of ACFs treated by E-beam irradiation with 400 kGy increased from $885m^2/g$ (pristine) to $1160m^2/g$ without any changes in structural property and functional group. The increase in specific surface area of the E-beam irradiated ACFs enhanced NO gas sensing properties such as response time and sensitivity. When the ACFs irradiated with 400 kGy, response time was remarkably reduced from 360 s to 210 s and sensitivity was increased by 4.5%, compared to the pristine ACFs. These results demonstrate convincingly that surface modification of ACFs using E-beam in hydrogen peroxide solution can enhance textural properties of ACFs and NO gas sensing ability of gas sensor at room temperature.

• 한국지반환경공학회 논문집
• /
• 제12권2호
• /
• pp.63-68
• /
• 2011

본 연구의 목표는 전자빔 공정을 적용하여 1,4-dioxane의 제거효율 및 독성평가를 하는 것이다. 이 실험에서는 전자빔 선량과 1,4-dioxane의 초기 농도에 따른 저감 효율 및 scavenger gas에 따른 무기화의 정도를 알아보았다. 또한 녹조류 중 하나인 Pseudokirohneriella Subcapitata를 이용하여 생물독성과 위해성 평가를 통한 독성저감기술을 확립하였다. 그 결과 1,4-dioxane은 전자빔 조사량이 증가할수록 분해 효율이 향상되었고, Radical Scavenger gas에 의한 TOC 제거는 $N_2O$나 $O_2$를 용해시켰을 때 효율이 증가되었다. 4일(96hrs) 후 독성평가 결과 전자빔 조사 강도의 증가에 따라 독성 영향이 저감되는 것을 알 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제9권3호
• /
• pp.984-990
• /
• 2014

Polymers are the most commonly used di-electrics because of their reliability, availability, ease of fabrication and cost. The commercial and industrial demand for advanced polymeric materials which are capable of being used in harsh environment is need of the hour. The study of the effect of electron beam irradiation on polymeric materials is an area of rapidly increasing interest. This paper discusses the resultant beneficial effects of electron beam irradiation on the SiR-EPDM blend having 50:50 composition. The changes in mechanical and electrical properties of SiR-EPDM blend which are exposed to three different doses of electron beam radiation namely 5 Mrad, 15 Mrad and 25 Mrad are presented. The irradiated blends are analyzed for their electro-mechanical and physico chemical properties. The electrical changes induced by irradiation are investigated by arc resistance, surface resistivity and volume resistivity measurements as per ASTM standards. The mechanical changes are observed by the measurement of tensile strength and elongation at break. Physico chemical investigation has been done using the FTIR, in order to investigate the irradiation induced chemical changes.