• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.78.2-78.2
• /
• 2017

Post-starburst (E+A) galaxies are thought to be in the green valley transition phase between star-forming blue galaxies and quiescent red galaxies. They are identified by their unusual spectra characterized by strong Balmer absorption lines and weak emission lines, indicating a period of starburst followed by abrupt quenching. However, the underlying mechanism that drives the formation of E+A galaxies still remains contradictory or inconclusive. Thus, in order to differentiate between the different formation scenarios of E+A galaxies, we perform a statistical analysis of the environments of E+A galaxies. We spectroscopically identify a large sample of post-starburst galaxies from the Sloan Digital Sky Survey Data Release 7 (SDSS DR7) using a selection criteria based on $H{\delta}$ equivalent width. We report our findings and discuss their implications in the context of post-starburst galaxy formation.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.05a
• /
• pp.603-606
• /
• 2005

우편 서비스는 사람과 조직간을 이어주어 실물 배달과 의사 소통을 위한 중요 네트워크 중의 하나이다. 2000 년에 출범한 인터넷 기반의 우체국 서비스인 ePOST 는 전통적인 우편 서비스와 농수산물 중심의 쇼핑몰에서 전자고지납부 및 에스크로 등으로 서비스를 확장하고 있다. 하지만 기존의 ePOST 가 B2C 형식을 기반으로 일반 고객을 위주로 서비스해 왔으며, 웹서비스 기술을 통해 기업 고객과 같은 B2B 서비스에 대한 새로운 시장기회를 추구할 수 있는 강력한 도구로서 활용될 수 있음을 의미한다. 따라서 이 논문에서는 기업 고객을 대상으로 우편서비스를 원활하게 지원하기 위한 방안으로 웹서비스의 도입 전략과 효과에 대하여 제시하고자 한다.

• Advances in Traditional Medicine
• /
• v.10 no.2
• /
• pp.90-102
• /
• 2010

Effect of ethanol (ASE) and water (ASW) extracts of Argyreia speciosa on blood glucose and lipid profile was investigated in normoglycemic and Streptozotocin (STZ)-induced diabetic animals. In oral glucose and sucrose tolerance test, treatment with ASE and ASW (100 and 200 mg/kg) and Glidenclamide (10 mg/kg) significantly improved the glucose and sucrose tolerance in normal animals. In addition, respective treatment for fifteen-day resulted in significant percentage reduction in serum glucose (SG) ie., 30.39% (lower dose of ASE) and 33.21% (higher dose of ASW). In standardized STZ (50 mg/kg, iv)-induced diabetic rats, a single dose of ASE and ASW treatment exhibited reduction in SG levels at different time intervals compared to basal levels. Administration of both the doses of ASE and ASW for fifteen-day days exhibited greater percentage reduction in glycemia (24.6%, 24.7%, 23.9% and 21.9% respectively) and also ameliorated restored to near normal value of all tested lipid parameters. Further, treatment also exhibited significantly improved glucose tolerance over the period of 120 min compared to diabetic control group. Eventhough treatment failed to increase serum insulin levels significantly but peripheral utilization of insulin was increased as evident by insulin tolerance test. Taken together, present study supports the traditional usage of title plant in the treatment of diabetes mellitus.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2018.10a
• /
• pp.257-257
• /
• 2018

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.5
• /
• pp.514-523
• /
• 2004

Statement of problem: All-ceramic restorations have been advocated for superior esthetics. Various post and core systems have been used to improve the strength of damaged teeth, but it is unclear whether they affect the final shade of finished all-ceramic restorations. Purpose: The influence of different types of post and core systems on light transmission through all-ceramic crowns was assessed by spectrophotometric analysis. Also the masking effect of different thickness of ceramic ingot was evaluated. Material and Methods : Forty-five sample disks (15mm in diameter) at several thickness(1.0, 1.5, 2.0mm) and value(shade 100, 200, 300) were made in heat pressed ceramic(IPS-Empress). Background specimens simulating gold-alloy cast posts(Type III casting gold alloy), metal posts(Ni-Cr casting alloy) and ceramic posts(CosmoPost) were fabrica-ted. Resin composite(Z250, A3 shade) was used as a tooth substrate reference. For each combination, the change in color was measured with a spectrophotometer. Readings were performed for 2 conditions (1) ability of ceramic to mask the core in relation to its thickness(1.0, 1.5, or 2.0mm) ; (2) influence of post and core types on the final color of the ceramic. Data were recorded according to the CIE $L^*a^*b^*$ systems and color difference($\Delta$E) was calculated. Results: 100 shade ingot: when ceramic thickness was 1.0mm, $\Delta$E value for ceramic post larger than 1 but $\Delta$E value for metal and gold post was larger than 2. For ceramic thickness of 1.5mm, only $\Delta$E value for metal was larger than 2, and the other samples' $\Delta$E value was smaller than 2. For ceramic thickness of 2.0mm, $\Delta$E values for all specimens was smaller than 2. 200 shade ingot: when ceramic thickness was 1.0mm, $\Delta$E value for ceramic post was smaller than 1 but $\Delta$E value for metal and gold post was larger than 2. For ceramic thickness of 1.5 mm, only the $\Delta$E value for metal was larger than 2, and the other samples' $\Delta$E value was smaller than 2. For ceramic thickness of 2.0mm, $\Delta$E values for all specimens was smaller than 1. 300 shade ingot: when ceramic thickness was 1.0mm, only $\Delta$E value for metal was larger than 2 and the other samples' $\Delta$E value was smaller than 2. For ceramic thickness of 1.5mm, $\Delta$E values for all specimens was smaller than 1. For ceramic thickness of 2.0mm, $\Delta$E values for all specimens was smaller than 1. Conclusion: The final esthetic result of the IPS-Empress glass-ceramic restoration was not affected by the presence of different core materials when the thickness was more than 2.0 mm. When ceramic thickness decreases to 1.5mm, it is advised to take the substrate aspects into consideration. If the ceramic thickness is less than 1.0mm, using the tooth color matched substrate is strongly recommended.

• Journal of Veterinary Clinics
• /
• v.8 no.1
• /
• pp.59-63
• /
• 1991

For the purpose of effective therapy and prevention of post weaning E. coli diarrhea, Enrofloxacin-(Baytril premix) was administered in the feed and a series of investigations were made the occurence of diarrhea, weight gain, feed conversion rate, changes In the counts of faecal E. coli and susceptibility of the isolated E. coli strains to antimicrobials. The results obtained were as follows 1. The weaned piglets which were treated with Baytril premix gained the average body weight of 3.2kg over the control group at the age of 62 days. The result indicates a marked weight gain effect which, by statiscal analysis, showed a significant difference(P<0.01). Administration of Baytril premix also resulted in the improvement of feed conversion rate and provention of post weaning diarrhea. 2. The counts of faecal E. coli in Baytri premx treated piglets showed a marked decrease from 3.14${\times}$10$\^$8/cells/g to 2${\times}$10$\^$7/cells/g at 5days post treatment and 1${\times}$10$\^$5/cells/g at 10 days post treatment. 3. 10 strains of E. coli isolated fred the experimental pig farm were highly susceptible to Bayoil, gentamicin and trimethoprim plus sulfamethoxazole.

• Corrosion Science and Technology
• /
• v.9 no.6
• /
• pp.310-316
• /
• 2010

Recently a fuel oil of the diesel engine of the marine ship is being changed with heavy oil of low quality as the oil price is higher more and more. Therefore the wear and corrosion in all parts of the engine such as cylinder liner, piston crown, spindle and seat ring of exhaust valves are predominantly increased. In particular the degree of wear and corrosion of piston crown is more seriously compared to the other parts of the engine due to operating in severe environment such as the high temperature of exhaust gas and repeating impact. Thus the repair weldment of the piston crown is a unique method to prolong the its life in a economical point of view. In this case, filler metals having a high corrosion and wear resistance such as stellite 6, Inconel 625 and Inconel 718 are mainly being used for repair welding. However it has been often happened that piston crown on the ship,s job site is being actually inevitably welded with mild filler metals. Therefore in this study, filler metals such as E4301, E4313 and E4316 were welded at SS401 steel as the base metal, and corrosion property of their weld metals in the case of post weld heat treatment or not was investigated with some electrochemical methods such as measurement of corrosion potential, cathodic and anodic polarization curves, cyclic voltammogram and polarization resistance etc. in 0.1% $H_2SO_4$ solution. Corrosion resistance of the weld metal of E4301 was better than the other weld metals in the case of no heat treatment, however, its resistance was considerably decreased with post weld heat treatment(annealing:$625^{\circ}C$, 2 hr) compared to other weld metals. The weld metals of E4313 and E4316 showed a relatively good corrosion resistance by post weld heat treatment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1734-1740
• /
• 2012

In this paper, we propose a FSOURCE circuit which requires such a small switching current that an eFuse OTP memory can be programmed in the post-package state of the PMIC chips using a single power supply. The proposed FSOURCE circuit removes its short-circuit current by using a non-overlapped clock and reduces its maximum current by reducing the turned-on slope of its driving transistor. Also, we propose a DOUT buffer circuit initializing the output data of the eFuse OTP memory with arbitrary data during the power-on reset mode. We design a 24-bit differential paired eFuse OTP memory which uses Magnachip's $0.35{\mu}m$ BCD process, and the layout size is $381.575{\mu}m{\times}354.375{\mu}m$($=0.135mm^2$).

• Journal of Cardiovascular Imaging
• /
• v.26 no.4
• /
• pp.250-252
• /
• 2018

• Asian Journal of Business Environment
• /
• v.5 no.4
• /
• pp.59-66
• /
• 2015

Purpose - The aim of the study is to analyze the impact of the European Union's (EU) focus on innovation and consumption, after the EU Eastern enlargement, on trade, investment, and technology cooperation patterns of Korea to formulate a pan-European marketing strategy, with a special emphasis on the mobile phone industry. Research design, data, and methodology - This study compares the intersection of the pivotal areas in the markets in the "post-new normal" era to identify outlets to commercialize development and innovation in this region. The EU would like to realize potential trade and investment opportunities with the Central European Economic Community (CEEC) from this enlargement. Results - The study analysis suggests a positive impact for innovation and consumption from the EU Eastern enlargement on trade, investment, and technology cooperation patterns of Korea to formulate a pan-European marketing strategy with a special emphasis on the mobile phone industry or motorcar e-strategy. Conclusions - Due to the evolving close interdependencies some hubs have emerged between regional, small markets and the central, larger ones such as Germany and France.