• The Journal of Korean Physical Therapy
• /
• v.28 no.5
• /
• pp.314-320
• /
• 2016

Purpose: This study compared the effectiveness of sling exercise and McKenzie exercise in patients with acute cervical whiplash associated disorder (WAD) caused by rear-end collision. Methods: Thirty WAD patients were randomly assigned to one of three groups; a sling exercise (SE) group, a McKenzie exercise (McE) group, and a control group. Members of the SE and McE exercised three times a week for four weeks under the researcher's guidance. Three groups performed TENS treatment three times a week for four weeks. Diagnostic radiological equipment was used to measure whiplash injury. Visual analog scale (VAS), neck disability index (NDI), and range of motion (ROM) were used in this study. Results: The three groups showed a significant pre-post treatment difference in measures of VAS and NDI (p<0.05). The SE group showed a significant pre-post treatment difference in measures of flexion and extension changes compared to the McE and control group (p<0.05). The SE group also showed significantly greater improvement in the VAS, NDI, and ROM changes than the control group (p<0.05). Conclusion: These findings indicate that sling exercise is a stronger and more aggressive intervention for treatment of acute WAD patients.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.36 no.1
• /
• pp.37-48
• /
• 2020

Logistics centers, distribution centers, or warehouse facilities increasingly dominate urban and suburban landscapes, their enormous but blank, repetitive facades completely overshadowing adjacent buildings. Mostly ignored by architects, this new building type symbolically represents the arrival of post-anthropocene, or post-urbicene era of architecture, in which an increasing portion of our built environment will not be intended for human occupancy, but rather for use by machines and artificial intelligence. As a new wave of logistics centers are becoming more automated, and more supersized, it is important to deepen architects' understanding of the organizational logic and programming factors that inform the overall design decisions for these facilities. With a particular focus on three case studies--Coupang, E-Mart, and Amazon Fulfillment Centers, this research examines the current trends in automation and expansion of logistics centers, and offers an analysis and forecast for future facilities in South Korea.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.7
• /
• pp.1059-1066
• /
• 2008

This study was carried out to investigate the effects of dietary sulfur (S) and vitamin E (Vit E) supplementation on the quality of beef from longissimus muscle of Hanwoo bulls. Eleven, 29 months-aged Hanwoo bulls were randomly divided into three feed supplementation groups (S (n = 4), Vit E (n = 4) and S+Vit E (n = 3)). S was given as much as 12 g/head/d and Vit E was given as much as 1,200 IU/head/d; both supplements were given for 3 months prior to slaughter. At 24 h post-slaughter, the carcasses were weighed and evaluated by official grader for carcass traits. At 48 h post-slaughter, the M. longissimus from each carcass was collected and stored at $4{\pm}0.2^{\circ}C$ for 10 days. There were no significant differences in yield and quality grades of carcass and proximate composition, physical properties and aroma pattern of meat among all groups. At 5 days of storage, the TBARS value of meat from cattle with S+Vit E supplementation was significantly lower (p<0.05) than other groups; and at 10 days of storage, the TBARS value of meat from cattle with Vit E and S+Vit E supplementations was significantly lower (p<0.05) than from cattle with S supplementation. At 5 days of storage, MetMb concentration of meat from cattle with S+Vit E supplementation was significantly lower (p<0.05) than from cattle with Vit E supplementation; and at 10 days of storage, MetMb concentration of meat from cattle with S+Vit E supplementation was significantly lower (p<0.05) than from other groups. At 10 days of storage, the redness value of meat from cattle with S supplementation was significantly higher (p<0.05) than from cattle with Vit E supplementation and the hue-angle value of meat from cattle with S and S+Vit E supplementations was significantly lower (p<0.05) than from cattle with Vit E supplementation. Dietary Vit E supplementation had a better effect on lipid stability whereas dietary S supplementation had a better effect on OxyMb stability. The dietary combination of S and Vit E created the highest protection for beef from myoglobin oxidation and thus improved the color stability of meat.

• International Journal of Ocean System Engineering
• /
• v.2 no.4
• /
• pp.209-213
• /
• 2012

Recently, the fuel using in the diesel engines of marine ships has been changed to a low quality of heavy oil because of the steady increase in the price of oil. Therefore, the wear and corrosion in all parts of the engine such as the cylinder liner, piston crown, and spindle and seat ring of exhaust valves has correspondingly increased. The repair welding of a piston crown is a unique method for prolonging its lifetime from an economic point of view. In this case, filler metals with a high corrosion and wear resistance are mainly being used for repair welding. However, often at a job site on a ship, a piston crown is actually welded with mild filler metals. Therefore, in this study, mild filler metals such as CSF350H, E8000B2, and 435 were welded to SS401 steel as the base metal, and the corrosion properties of the weld metals with and without post weld heat treatment were investigated using some electrochemical methods in a 0.1% $H_2SO_4$ solution. The weld metal welded with CSF350H filler metal exhibited the best corrosion resistance among these filler metals, irrespective of the heat treatment. However, the weld metal zones of the E8000B2 and 435 filler metals exhibited better and worse corrosion resistance with the heat treatment, respectively. As a result, it is suggested that in the case of repair welding with CSF350H and 435 filler metals, no heat treatment is advisable, while heat treatment is desirable if E8000B2filler metal is used with repair welding.

• Structural Engineering and Mechanics
• /
• v.49 no.5
• /
• pp.569-595
• /
• 2014

In this paper, a novel semi-energy finite strip method (FSM) is developed based on the concept of first order shear deformation theory (FSDT) in order to attempt the post-buckling solution for thin and relatively thick functionally graded (FG) plates under uniform end-shortening. In order to study the effects of through-the-thickness shear stresses on the post-buckling behavior of FG plates, two previously developed finite strip methods, i.e., semi-energy FSM based on the concept of classical laminated plate theory (CLPT) and a CLPT full-energy FSM, are also implemented. Moreover, the effects of aspect ratio on initial post-buckling stiffness of FG rectangular plates are studied. It has been shown that the variation of the ratio of initial post-buckling stiffness to pre-buckling stiffness ($S^*/S$) with respect to aspects ratios is quite independent of volume fractions of constituents in thin FG plates. It has also been seen that the universal curve representing the variation of ($S^*/S$) with aspect ratio of a FG plate demonstrate a saw shape curve. Moreover, it is revealed that for the thin FG plates in contrast to relatively thick plates, the variations of non-dimensional load versus end-shortening is independent of ceramic-metal volume fraction index. This means that the post-buckling behavior of thin FG plates and the thin pure isotropic plates is similar. The results are discussed in detail and compared with those obtained from finite element method (FEM) of analysis. The study of the results may have a great influence in design of FG plates encountering post-buckling behavior.

• Structural Engineering and Mechanics
• /
• v.22 no.2
• /
• pp.197-222
• /
• 2006

In this paper, the non-linear time-dependent closed-form, discrete and combined solutions for the post-elastic response of a geometrically and physically non-linear suspended cable to a uniformly distributed load considering the creep effects, are presented. The time-dependent closed-form method for the particularly straightforward determination of a vertical uniformly distributed load applied over the entire span of a cable and the accompanying deflection at time t corresponding to the elastic limit and/or to the elastic region, post-elastic and failure range of a suspended cable is described. The actual stress-strain properties of steel cables as well as creep of cables and their rheological characteristics are considered. In this solution, applying the Irvine's theory, the direct use of experimental data, such as the actual stress-strain and strain-time properties of high-strength steel cables, is implemented. The results obtained by the closed-form solution, i.e., a load corresponding to the elastic limit, post-elastic and failure range at time t, enable the direct use in the discrete non-linear time-dependent post-elastic analysis of a suspended cable. This initial value of load is necessary for the non-linear time-dependent elastic and post-elastic discrete analysis, concerning incremental and iterative solution strategies with tangent modulus concept. At each time step, the suspended cable is analyzed under the applied load and imposed deformations originated due to creep. This combined time-dependent approach, based on the closed-form solution and on the FEM, allows a prediction of the required load that occurs in the post-elastic region. The application of the described methods and derived equations is illustrated by numerical examples.

• Restorative Dentistry and Endodontics
• /
• v.45 no.2
• /
• pp.19.1-19.8
• /
• 2020

Objective: This study aimed to evaluate the effect of ultrasonic cleaning of the intracanal post space on the bond strength of fiber posts in oval canals filled with a premixed bioceramic (Bio-C Sealer [BIOC]) root canal sealer. Materials and Methods: Fifty premolars were endodontically prepared and divided into 5 groups (n = 10), based on the type of root canal filling material used and the post space cleaning protocol. A1: gutta-percha + AH Plus (AHP) and post space preparation with ultrasonic cleaning, A2: gutta-percha + BIOC and post space preparation with ultrasonic cleaning, B1: gutta-percha + AHP and post space preparation, B2: gutta-percha + BIOC and post space preparation, C: control group. Fiber posts were cemented with a self-adhesive luting material, and 1 mm thick slices were sectioned from the middle and cervical third to evaluate the remaining filling material microscopically. The samples were subjected to a push-out test to analyze the bond strength of the fiber post, and the results were analyzed with the Shapiro-Wilk, Bonferroni, Kruskal-Wallis, and Mann-Whitney tests (p < 0.05). Failure modes were evaluated using optical microscopy. Results: The results showed that the fiber posts cemented in canals sealed with BIOC had lower bond strength than those sealed with AHP. The ultrasonic cleaning of the post space improved the bond strength of fiber posts in canals sealed with AHP, but not with BIOC. Conclusions: BIOC decreased the bond strength of fiber posts in oval canals, regardless of ultrasonic cleaning.

• The korean journal of orthodontics
• /
• v.21 no.1 s.33
• /
• pp.223-238
• /
• 1991

This study was carried out in order to findout the amount of tooth movement, the changes arch size and the changes in arch morphology following orthodontic treatment and to provide a guideline for to predict post-treatment arch morphology. The sample group for this study consists of 15 males and 22 females, totalling in 37 persons, who received orthodontic treatment at Orthodontic Department of Dankook Univ. Dental Hospital. They are classified into Extraction Class I treatment group (E I), Non-extraction Class I treatment group (N I), and Non-extraction Class III treatment group (N III), according to their pre-treatment malocclusion state and methods of treatment. Following conclusions and averaged dental arch form for each group were obtained by cephalometric linear measurements and dental arch measurements using pre- and post-treatment lateral cephalograms and plaster study models. 1. Intercanine width were reduced in max. of both EI and NI during the period of treatment, 2. Intermolar width were reduced in max. of EI and increased in max. of NI. Therefore although there was no difference between these two groups before the treatment, intermolar width of the max, of NI was wider than that of E1 after the treatment. 3. PMV-incisor distance and PMV-canine distance were decreased in both max. and mand. of EI and that of NI, during the period of treatment. PMV-molar distance was decreased in both max. and mand. of NI and in mand. of NIII. 4. Items that showed stability during the treatment were: max. & mand. PMV-molar distance, mand. intercanine and intermolar width in EI; mand. intercanine and intermolar width in NI; mand. & max. PMV-incisor distance, PMV-canine distance, max. PMV-molar distance and max. & mand. intercanine and intermolar width in NIII. 5. The differences in averaged canine and molar variances to post-treatment dental arch form were present only in EI and in NI. There was no variance between maxilla and mandible in each group.

• Korean Journal of Adult Nursing
• /
• v.16 no.1
• /
• pp.37-48
• /
• 2004

Purpose: The purpose of this preliminary study was to develop and evaluate the effects of East-West Self-help program for Rehabilitation of post-stroke clients. Method: This program is developed through literature review, survey and seminar. The program is consisted of six sessions twice a week for 6 weeks. This program is composed of health education on stroke, exercise, oriental nursing interventions, and therapeutic recreation. The outcomes have been evaluated on the basis of perceived health status, self-efficacy, U/E function, ADLs and subjective response. Result: 1) After the 6 week program, the perceived health status had improved and the score of rehabilitation self-efficacy increased significantly. 2) After the 6 week program, the score of BADL increased significantly, but, the score of IADL was not statistically significant. 3) After the 6 week program, the amount of use and quality of movement of the affected U/E were increased significantly. 4) All of the participants showed satisfaction with this program. Conclusion: Considering these research results, the program is effective in improving functional abilities and self-management ability. Therefore this program could be continuously developed and implemented as a community based self-helf group program for post-stroke clients.

• Textile Coloration and Finishing
• /
• v.18 no.1
• /
• pp.10-19
• /
• 2006

Despite several recent attempts to measure the concentration of individual catechins by HPLC, it has not been so easy to separate catechins accurately. The aim of the present work is to provide a proper condition for separating each component of catechins by HPLC analysis, and also to evaluate the experimental variables including color differences, and metal ion contents after dyeing and mordanting. Four kinds of Catechins, (-)-epicatechin(EC), (-)-epicatechin gallate(ECG), (-)-epigallocatechin(EgC), (-)-epigallocatechin gllate(EgCG) were isolated from the residues after dyeing. Catechins in Korean green tea leaves are richer when e tea leaves are younger. Higher concentration of catechins owes it to e way it is processed. The contents of catechins adsorbed in silk fabrics after dyeing were in order of EGCG>ECG>EGC>EC. We have found $68\%$ uptake of EGCG, and 116.8mg of EGCG in the silk fabrics after it was dyed with $1\%$ Korean green tea extracts. The absorbance intensity and K/S values of dyed silk fabrics were increased with dyeing temperature and time. Only the surface color of the silk fabric dyed with green tea extracts was yellowish red, but it changed from yellowish red to red with an increase in the mordant concentration. Post-mordanted silk fabrics with ferrous sulfate changed from yellowish red to red and purple color shade. In a practical evaluation, there is no significant change in color after twenty times of the continuous dry cleaning process. However, post-mordanted fabrics with ferrous sulfate faded the brightness of color after dry cleaning. Dyeing silk fabrics with a Korean tea extract reduced the metal ion contents in the silk fabrics when compared to the untreated silk fabrics. Metal contents in silk fabrics dyed and post-mordanted with $1\%$ each metal solution were 0.194 ppm for Aluminum, 1.601ppm for Copper, and 0.334 ppm for Iron. After the post-mordanting process, the heavy metal ion absorption increased, which was mainly attributed to the catechins and polyphenols in dyed silk fabrics.