• 제목/요약/키워드: E-J characteristic

검색결과 177건 처리시간 0.023초

HWE방법에 의한 CdSe 박막 성장과 광전기적 특성 (Growth of CdSe thin films using Hot Wall Epitaxy method and their photoelectrical characteristics)

  • 홍광준;이관교;이상열;유상하;신용진;서상석;정준우;정경아;신영진;정태수;김택성;문종대;김혜숙
    • 센서학회지
    • /
    • 제6권4호
    • /
    • pp.328-336
    • /
    • 1997
  • HWE 방법에 의해 CdSe 박막을 (100)방향 Si 기판 위에 성장시켰다. 증발원과 기판의 온도를 각각 $600^{\circ}C$, $430^{\circ}C$로하여 성장시킨 CdSe 박막의 이중 결정 X-선 요동곡선(DCRC)의 반폭치(FWHM)값이 380 arcsec로 가장 작았다. Van der Pauw 방법으로 Hall 효과를 측정하여 운반자농도의 In n 대 (1/T)에서 구한 활성화에너지는 0.19eV로 측정되었다. Hall 이동도의 온도 의존성은 30K에서 150K까지는 $T^{3/2}$에 따라 증가하여 불순물산란에 기인하고, 150K에서 293K까지는 $T^{-3/2}$에 따라 감소하여 격자산란에 기인한 것으로 고찰되었다. 광전도셀의 특성으로 spectral response, 최대 허용소비전력(MAPD), 광전류와 암전류(pc/dc)의 비 및 응답시간을 측정하였다. Cu 증기분위기에서 열처리한 광전도셀의 경우, 감도(${\gamma}$)는 0.99, pc/dc은 $1.39{\times}10^{7}$, 그리고 최대 허용소비전력(MAPD)은 335mW, 오름시간(rise time)은 10ms, 내림시간(decay time)은 9.5ms로 가장 좋은 광전도 특성을 얻었다.

  • PDF

Zn(Ox,S1-x) 버퍼층 적용을 통한 Cu2ZnSnS4 태양전지 특성 향상 (Improvement of Cu2ZnSnS4 Solar Cell Characteristics with Zn(Ox,S1-x) Buffer Layer)

  • 양기정;심준형;손대호;이상주;김영일;윤도영
    • Korean Chemical Engineering Research
    • /
    • 제55권1호
    • /
    • pp.93-98
    • /
    • 2017
  • 본 실험에서는 $Cu_2ZnSnS_4$(CZTS) 태양전지의 흡수층 상부에 다양한 조성을 갖는 $Zn(O_x,S_{1-x})$ 버퍼층을 적용하여 특성 변화를 살펴보았다. $Zn(O_{0.76},S_{0.24})$, $Zn(O_{0.56},S_{0.44})$, $Zn(O_{0.33},S_{0.67})$ 그리고 $Zn(O_{0.17},S_{0.83})$의 4가지 단일막의 경우, 전자-정공의 재결합 억제에 유리한 밴드갭 구조를 나타내는 $Zn(O_{0.76},S_{0.24})$ 버퍼층을 소자에 적용했다. $Zn(O_{0.76},S_{0.24})$ 버퍼층을 소자에 적용 시, 흡수층으로부터 S가 버퍼층으로 확산되어 소자 내에서의 버퍼층은 $Zn(O_{0.7},S_{0.3})$의 조성을 나타냈다. CdS 버퍼층의 $E_V$보다 낮은 에너지 준위를 갖는 $Zn(O_{0.7},S_{0.3})$ 버퍼층은 전자-정공 재결합을 효과적으로 억제하기 때문에 CZTS 태양전지의 $J_{SC}$$V_{OC}$ 특성을 향상시켰다. 이를 통해 CdS 버퍼층이 적용된 CZTS 태양전지의 효율인 2.75%가 $Zn(O_{0.7},S_{0.3})$ 버퍼층 적용을 통해 4.86%로 향상되었다.

A New Sterol Regulatory Element Binding Protein, SrbB Is Critical for Hypoxia Adaptation and Virulence in the Human Fungal Pathogen Aspergillus fumigatus

  • Chung, Dawoon;Barker, Bridget M.;Carey, Charles C.;Merriman, Brittney;Werner, Ernst R.;Lechner, Beatrix E.;Dhingra, Sourabh;Cheng, Chao;Xu, Wenjie;Blosser, Sara J.;Morohashi, Kengo;Mazurie, Aurelien;Mitchell, Thomas K.;Haas, Hubertus;Mitchell, Aaron P.;Cramer, Robert A.
    • 한국균학회소식:학술대회논문집
    • /
    • 한국균학회 2015년도 춘계학술대회 및 임시총회
    • /
    • pp.15-15
    • /
    • 2015
  • Aspergillus fumigatus is a major cause of invasive aspergillosis (IA), a significant health issue worldwide with high mortality rates up to 95%. Our lab is interested in how A. fumigatus adapts to low oxygen conditions 'hypoxia', which is one of the important host microenvironments. A. fumigatus SrbA is a basic helix-loop-helix (bHLH) transcriptional regulator and belongs to sterol regulatory element binding protein (SREBP) family members. Loss of SrbA completely blocks growth in hypoxia and results in avirulence in murine models of IA suggesting an essential role of SrbA in hypoxia adaptation and virulence in A. fumigatus. We conducted chromatin immunoprecipitation sequencing (ChIP-seq) with A. fumigatus wild type using a SrbA specific antibody, and 97 genes were revealed as SrbA direct targets. One of the 'SrbA regulons' (AFUB_099590) was a putative bHLH transcriptional regulator whose sequence contained a characteristic tyrosine substitution in the basic portion of the bHLH domain of SREBPs. Therefore, we designated AFUB_099590 SrbB. Further characterization of SrbB demonstrated that SrbB is important for radial growth, biomass production, and biosynthesis of heme intermediates in hypoxia and virulence in A. fumigatus. A series of quantitative real time PCR showed that transcription of several SrbA regulons is coordinately regulated by two SREBPs, SrbA and SrbB in hypoxia. This suggests that SrbA and SrbB have both dependent and independent functions in regulation of genes responsible for hypoxia adaptation in A. fumigatus. Together, our data provide new insights into complicated roles of SREBPs in adaptation of host environments and virulence in pathogenic fungi.

  • PDF

Growth Performance and Carcass Characteristics of Korean Native Ducks Fed Diets with Varying Levels of Limiting Amino Acids

  • Choo, Y.K.;Kwon, H.J.;Oh, S.T.;Kang, C.W.;Kim, H.K.;Hong, E.C.;Heo, K.N.;Lee, S.K.;An, B.K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제27권4호
    • /
    • pp.518-523
    • /
    • 2014
  • There are multiple experiments conducted with male Korean native ducks (KND) to evaluate the optimal levels of limiting amino acids (AA). In Exp. 1, a total of 450 one-d-old male KNDs were divided into five groups with six replicates and fed experimental diets with varying levels of lysine, total sulfur amino acids (TSAA) and threonine (T1, 0.90/0.74/0.70%; T2, 1.00/0.82/0.77%; T3, 1.10/0.90/0.85%; T4, 1.20/0.98/0.93%; T5, 1.30/1.07/1.01%) to 21 d of age. In Exp. 2, one-d-old male KND were received and fed commercial starter diet from hatching to 21 d of age, and then divided into five groups with six replicates and fed one of five diets varying levels of lysine, TSAA, and threonine (T1, 0.73/0.62/0.54%; T2, 0.80/0.68/0.60%; T3, 0.87/0.74/0.65%; T4, 0.94/0.80/0.70%; T5, 1.01/0.86/0.75%) during 22 to 56 d of age, respectively. The BW gain was linearly increased as dietary limiting AA levels increased to 1.20% lysine, 0.98% TSAA and 0.93% threonine. There were no significant differences in feed intake, gain:feed and uniformity among groups. In Exp. 2, the BW gain and gain:feed were not affected by dietary limiting AA levels. There were no significant differences in carcass characteristics and meat quality among groups. The growth performance and carcass characteristics did not show the significant response to increasing dietary limiting AA levels in KND during 22 to 56 d of age. In conclusion, the levels of lysine, TSAA and threonine necessary to maximize growth for starter phase were at least 1.20%, 0.98%, and 0.93%, respectively. On the other hands, KND require relatively low levels of limiting AA for late growth and carcass yield. The dietary levels of 0.73% lysine, 0.62% TSAA and 0.54% threonine appear to be adequate during growing phase.

Effects of thickness of GIZO active layer on device performance in oxide thin-film-transistors

  • Woo, C.H.;Jang, G.J.;Kim, Y.H.;Kong, B.H.;Cho, H.K.
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 하계학술대회 논문집
    • /
    • pp.137-137
    • /
    • 2009
  • Thin-film transistors (TFTs) that can be prepared at low temperatures have attracted much attention due to the great potential for flexible electronics. One of the mainstreams in this field is the use of organic semiconductors such as pentacene. But device performance of the organic TFTs is still limited by low field effect mobility or rapidly degraded after exposing to air in many cases. Another approach is amorphous oxide semiconductors. Amorphous oxide semiconductors (AOSs) have exactly attracted considerable attention because AOSs were fabricated at room temperature and used lots of application such as flexible display, electronic paper, large solar cells. Among the various AOSs, a-IGZO was considerable material because it has high mobility and uniform surface and good transparent. The high mobility is attributed to the result of the overlap of spherical s-orbital of the heavy pest-transition metal cations. This study is demonstrated the effect of thickness channel layer from 30nm to 200nm. when the thickness was increased, turn on voltage and subthreshold swing were decreased. a-IGZO TFTs have used a shadow mask to deposit channel and source/drain(S/D). a-IGZO were deposited on SiO2 wafer by rf magnetron sputtering. using power is 150W, working pressure is 3m Torr, and an O2/Ar(2/28 SCCM) atmosphere at room temperature. The electrodes were formed with Electron-beam evaporated Ti(30nm) and Au(70nm) structure. Finally, Al(150nm) as a gate metal was evaporated. TFT devices were heat treated in a furnace at $250^{\circ}C$ in nitrogen atmosphere for an hour. The electrical properties of the TFTs were measured using a probe-station to measure I-V characteristic. TFT whose thickness was 150nm exhibits a good subthreshold swing(S) of 0.72 V/decade and high on-off ratio of 1E+08. Field effect mobility, saturation effect mobility, and threshold voltage were evaluated 7.2, 5.8, 8V respectively.

  • PDF

Defect-related yellowish emission of un doped ZnO/p-GaN:Mg heterojunction light emitting diode

  • Han, W.S.;Kim, Y.Y.;Ahn, C.H.;Cho, H.K.;Kim, H.S.;Lee, J.H.
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 하계학술대회 논문집
    • /
    • pp.327-327
    • /
    • 2009
  • ZnO with a large band gap (~3.37 eV) and exciton binding energy (~60 meV), is suitable for optoelectronic applications such as ultraviolet (UV) light emitting diodes (LEDs) and detectors. However, the ZnO-based p-n homojunction is not readily available because it is difficult to fabricate reproducible p-type ZnO with high hall concentration and mobility. In order to solve this problem, there have been numerous attempts to develop p-n heterojunction LEDs with ZnO as the n-type layer. The n-ZnO/p-GaN heterostructure is a good candidate for ZnO-based heterojunction LEDs because of their similar physical properties and the reproducible availability of p-type GaN. Especially, the reduced lattice mismatch (~1.8 %) and similar crystal structure result in the advantage of acquiring high performance LED devices. In particular, a number of ZnO films show UV band-edge emission with visible deep-level emission, which is originated from point defects such as oxygen vacancy, oxygen interstitial, zinc interstitial[1]. Thus, defect-related peak positions can be controlled by variation of growth or annealing conditions. In this work, the undoped ZnO film was grown on the p-GaN:Mg film using RF magnetron sputtering method. The undoped ZnO/p-GaN:Mg heterojunctions were annealed in a horizontal tube furnace. The annealing process was performed at $800^{\circ}C$ during 30 to 90 min in air ambient to observe the variation of the defect states in the ZnO film. Photoluminescence measurements were performed in order to confirm the deep-level position of the ZnO film. As a result, the deep-level emission showed orange-red color in the as-deposited film, while the defect-related peak positions of annealed films were shifted to greenish side as increasing annealing time. Furthermore, the electrical resistivity of the ZnO film was decreased after annealing process. The I-V characteristic of the LEDs showed nonlinear and rectifying behavior. The room-temperature electroluminescence (EL) was observed under forward bias. The EL showed a weak white and strong yellowish emission colors (~575 nm) in the undoped ZnO/p-GaN:Mg heterojunctions before and after annealing process, respectively.

  • PDF

건물에너지시뮬레이션을 활용한 연동형 온실 및 작물에너지모델 설계 및 이의 냉·난방부하 산정 (Design of Energy Model of Greenhouse Including Plant and Estimation of Heating and Cooling Loads for a Multi-Span Plastic-Film Greenhouse by Building Energy Simulation)

  • 이승노;박세준;이인복;하태환;권경석;김락우;여욱현;이상연
    • 생물환경조절학회지
    • /
    • 제25권2호
    • /
    • pp.123-132
    • /
    • 2016
  • The importance of energy saving technology for managing greenhouse was recently highlighted. For practical use of energy in greenhouse, it is necessary to simulate energy flow precisely and estimate heating/cooling loads of greenhouse. So the main purpose of this study was to develope and to validate greenhouse energy model and to estimate annual/maximum energy loads using Building Energy Simulation (BES). Field experiments were carried out in a multi-span plastic-film greenhouse in Jeju Island ($33.2^{\circ}N$, $126.3^{\circ}E$) for 2 months. To develop energy model of the greenhouse, a set of sensors was used to measure the greenhouse microclimate such as air temperature, humidity, leaf temperature, solar radiation, carbon dioxide concentration and so on. Moreover, characteristic length of plant leaf, leaf area index and diffuse non-interceptance were utilized to calculate sensible and latent heat exchange of plant. The internal temperature of greenhouse was compared to validate the greenhouse energy model. Developed model provided a good estimation for the internal temperature throughout the experiments period (coefficients of determination > 0.85, index of agreement > 0.92). After the model validation, we used last 10 years weather data to calculate energy loads of greenhouse according to growth stage of greenhouse crop. The tendency of heating/cooling loads change was depends on external weather condition and optimal temperature for growing crops at each stage. In addition, maximum heating/cooling loads of reference greenhouse were estimated to 644,014 and $756,456kJ{\cdot}hr^{-1}$, respectively.

Predicting Parturition Time through Ultrasonic Measurement of Posture Changing Rate in Crated Landrace Sows

  • Wang, J.S.;Wu, M.C.;Chang, H.L.;Young, M.S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제20권5호
    • /
    • pp.682-692
    • /
    • 2007
  • This study presents an automatic system to predict parturition time in the crated sows. The system relies on ultrasonic transducers mounted from above along the length of the crate. Using a 40 kHz time of flight (TOF) single envelope wave, the momentary distances between the sensors are measured. Therefore, the local momentary height of the sow and the momentary posture, i.e. standing posture (SDP), kneeling posture (KP), sitting posture (STP) and lateral lying posture (LLP) are determined. Crated sows change their postures from standing to lying and vice versa which follows a characteristic pattern. As parturition approaches, sows exhibit uneasiness, restlessness and the stand up sequence (SUS, the posture transition from LLP to SDP) rate increases because of labor pains. In time series, the SUS rate demonstrates a peak and it happens approximately 0-12 h before parturition. In this paper, the basic parturition threshold value method (BPTVM) and the same hour method (SHM) are proposed for predicting parturition, both of which are based on the SUS rate. The BPTVM mainly detects the peak of the SUS rate. As the SUS rate exceeds the threshold value, the parturition becomes predictable. Moreover, the SHM calculates the difference in the SUS rates between a particular time of day and the corresponding time of the preceding day. Compared to the BPTVM, the SHM can eliminate the circadian rhythm of the SUS rate influenced by feeding behavior. Using the SHM the parturition can be approximately predicted within hours. In an attempt to define the threshold parameters of predicting parturition, a data set with 32 sows of the SUS rate are used to estimate assumable predicting probability. The results show the assumable probability of the parturition prediction within 9 h is 96.9% for the SHM and 84.4% for the BPTVM. Moreover, the SHM can even reach a 75% probability of prediction within three hours of parturition. We conclude that the SHM is more accurate and is more useful for parturition time prediction. When parturition is detected, the proposed algorithm generates a warning signal which can inform human personnel to protect the mother and newborn piglets.

藥水 수질 特性에 관한 연구 -전남지역을 중심으로- (A Study of Water Quality characteristic of Natural Mineral Water - In Chonnam Area -)

  • 김인수;하훈;서원술;배주순;문희;박철웅;오은하;이소영;김명혜
    • 한국환경보건학회지
    • /
    • 제24권1호
    • /
    • pp.87-97
    • /
    • 1998
  • This study was performed to investigate the Natural mineral water quality at 47 sites in Chonnam area, samples were collected spring, summer, fall, winter for a seasonal variation in 1996. The results obtained were summarized as follows 1. The mean of F, pH, HCO$_3$, NO$_3$ -N were 0.19 mg/l, 6. 9, 34.99 mg/l, 1.40 mg/l and those of Na, K, Ca, Mg were 12.1 mg/l, 1.2 mg/l, 7.7 mg/l, 2.1 mg/l respectively. 2. The contents of F were reasonable at Multonggol as 1.35 mg/l and Yongbayui as 0.57 mg/l respectively, but there is no detected at Sidong and detected below 0.1 mg/l at Gubongsan, Hansansa area. 3. According to the geological effect, the content of F was showed higher in granite than in tuff, and index of pH was higher in tuff than in andesite, and content of HCO$_3$ was higher in andesite than in granite. 4. The K and O values were used as index of healthy and delicious water. As a result, thirtyfive sites(74.5%) was decided as healthy and delicious water. 5. The contents of NO$_3$-N were detected over 5 mg/l at Sukchonsa, Gajanggol, Yudalsan, Muchang, Kisan.

  • PDF

한국산 살모사에서 최초로 발견한 돼지악구충의 제3기 유충 (The first discovery of larval Gnathostoma hispidum (Nematoda: Gnathostomidae) from a snake host, Agkistrodon breuicaudn)

  • 손운목;이순형
    • Parasites, Hosts and Diseases
    • /
    • 제36권2호
    • /
    • pp.81-90
    • /
    • 1998
  • 국내 토착 악구충을 발견하기 위하여 1994년 3월부터 1997년 6월까지 미꾸리 3,450마리, 황소 개구리 24마리, 무자치 55마리, 능구렁이 2마리, 유혈목이 62마리, 살모사류 87마리 및 고양이 (stomach only) 438마리를 조사하였던 바, 12마리의 살모사에서 총 21마리의 악구충 유충이 검출되었다. 종 동정을 위하여 검출한 유충의 일부는 glycerin-jelly 봉입 표본 및 조직절편 횡단표본 으로 제작하여 광학현미경으로 관찰하였고, 일부는 주사전자현미경으로 관찰하였다. 유충은 평균 $2.233{\;}times{\;}0.343{\;}mm$ 크기이었고, 작은 피극이 일정한 간격으로 배열되어 있는 약 210줄의 가로 주름을 가지고 있었다. 특징적인 head-bulb에는 소구 (booklet)가 전방에서부터 평균 36.8개, 39.0개, 41.7개 및 44.3개씩 4줄 배열되어 있었다. 중장 부위의 횡단면에서는 19-25개의 상피세 포로 이루어진 장벽이 관찰되었고, 대부분의 장상피세포는 1개씩의 큰 핵을 가지고 있었다. 주사 전자현미경 관찰에서는 충체 전단의 입 부위, 특징적인 head-bulb, 가로주름 (transverse striation)과 피극 (cuticularspine), ceivicalpapilla, 후단 부위 표피 등에서 특징적인 소견을 나 타내었다. 이상의 형태학적 특징을 근거로 하여 한국산 살모사에서 검출한 악구충의 유충을 돼지 악구충 (Gnohostoma hispidum)의 advanced third-stage larva로 동정하였고, 이 연구를 통하여 살모사 (Afkisfodon breuicaudus)가 돼지악구충의 중간숙주임이 최초로 밝혀졌다.

  • PDF