• Economic and Environmental Geology
• /
• v.32 no.1
• /
• pp.19-31
• /
• 1999

In this study, we have estimated lineaments in the Euiseong area, Kyungbuk Province, from Landsat TM by applying the algorithm developed by Kim and Won et al. which can effectively reduce the look direction bias associated with the Sun's azimuth angle. Fratures over the study area were also mapped in the field at 57 selected sites to compare them with the results from the satellite image. The trends of lineaments estimated from the Landsat TM images are characterized as $N50^{\circ}$~70W, NS~$N10^{\circ}$W, and $N10^{\circ}$~$60^{\circ}$E trends. The spatial distribution of lineaments is also studied using a circular grid, and the results show that the area can be divided into two domains : domain A in which NS~$N20^{\circ}$E direction is dominant, and domain B in which west-north-west direction is prominent. The trends of lineaments can also be classified into seven groups. Among them, only C, D and G trends are found to be dominant based upon Donnelly's nearest neighbor analysis and correlations of lineament desities. In the color composite image produced by overlaying the lineament density map of these C-, D-, and G-trends, G-trend is shown to be developed in the whole study area while the eastern part of the area is dominated by D-trend. C-trend develops extensively over the whole are except the southeastern part. The orientation of fractures measured at 35 points in the field shows major trends of NS~$N30^{\circ}$E, $N50^{\circ}$~$80^{\circ}$W, and N80$^{\circ}$E~EW, which agree relatively well with the lineaments estimated form the satellite image. The rose diagram analysis fo field data shows that WNW-ESE trending discontinuities are developed in the whole area while discontinuities of NS~$N20^{\circ}$E are develped only in the estern part, which also coincide with the result from the satellite image. The combined results of lineaments from the satellite image and fracture orientation of field data at 22 points including 18 minor faults in Sindong Group imply that the WNW-ESE trend is so prominent that Gumchun and Gaum faults are possibly extended up to the lower Sindong Group in the study area.

• Journal of Distribution Science
• /
• v.12 no.4
• /
• pp.41-46
• /
• 2014

Purpose - This study focused on providing strategic findings that make significant sense for companies that are looking for a future outsourcing strategy. The study analyzes the results of outsourcing in the information logistics systems field and verifies the results through experimental study of the performance delivered by logistics outsourcing types. Research design, data, and methodology - The study sample was assembled based on a random sampling method used to extract the initial 451 companies from a list of Korean distributors, wholesalers, and retailers. Following that sample process, 423 companies were confirmed by verifying their e-mail address and contacts (telephone and fax numbers), and were selected as initial research subjects. We reduced that number to 331 companies for the survey sample through telephone interviews in advance with the 423 companies that were targeted, in order to verify whether they are in the field of outsourcing of information logistics systems. The period of the survey extended from November 10, 2013 to January 10, 2014. The number of collected surveys totaled 181. We reviewed the contents of the survey responses, and reduced the number of research subjects to 175. In this study, we used a standard analysis to investigate whether there is a difference in distribution results based on different types of outsourcing information in the logistics system field and, through T-verification, we investigated whether the difference between distribution results in each group resulting from that standard analysis is statistically significant. Results - These results show that there is a difference in distribution outcome, based upon type of distribution outsourcing. In addition, we determined that they are meaningful results by confirming that, for usability and to improve the capabilities of a third-party logistics service supplier, both the choice of reasonable outsourcing types and the enhancement of various types of alliances are very important success factors. Taken together these study results, with a goal of enhancing the distribution capabilities of a Korean distributor, can be implemented to enhance management results achievable by supplying an information logistics system in the form of strategic outsourcing rather than in the form of simple outsourcing. In addition, the outcomes of logistics distributors in Korea that are using outsourcing in the logistics information systems field show high performance results in commercial endeavors in the following order: competitive, pre-competitive, non-competitive, and pro-competitive. Conclusions - This study focused on providing strategic findings. However, in the case of outsourcing in the field of information logistics systems of Korean distributors, there has been a focus on simple outsourcing rather than on strategic outsourcing; furthermore, there has been a concentration on non-competitive forms instead of pro-competitive forms, which could achieve better distribution results. This discussion is presented in more detail in the analysis results of this study.

• Journal of Preventive Medicine and Public Health
• /
• v.7 no.2
• /
• pp.403-415
• /
• 1974

The author has investigated epidemiological features of human cases of epidemic encephalitis (E. E.) in the Republic of Korea and the status of antibody requisition in pre-and post-epidemic time. And virological and serological studies with regarding the relationship of E. E. infection between human and piglet, and field survey against its vector by means of virus isolation from mosquitoes were carried out. Finally, vaccine field trial against human population has also been evaluated in order to confirm its effectiveness. The results of the studies are summarized as follows : 1. The annual incidence of reported cases during the past 25 years (1949-1973) in the Republic of Korea has shown two patterns, one was typical cyclic incidence and the other one was irregular. Annual average morbidity and mortality rate per 100,000 population were 5.7 and 2.1 and fatality rate was 34.6% in typical cyclic years. 2. With regard to the geographical distribution of E. E., the province of Jeolla-Bug-Do illustrated the highest incidence regardless of the epidemic size. 3. The main epidemic period was between mid-August and mid-September (above 90% of the total number of cases). The first case was reported in middle of July and the epidemic ceased in late of October. 4. An analysis of the age distribution of cases of E. E., has shown that above 90% of the total cases occurred in the age groups under 14 years and it was noted that about its 54% were occurred in the age groups between 5-9 years group. 5. Through the Haemagglutination Inhibition (H-I) test for the laboratory diagnosis of E. E., it was found that higher H-I antibody titer was usually detected in the convalescent phase, 15 days after onset. 6. The H-I antibody survey against 563 healthy population by age groups during the pre-epidemic season showed that 422(75%) were less than H-I titer, 1:20 and 122(21.7%) were positive H-I titer, 1:20. Among the 94 American in Seoul who had not been in E. E. endemic area previously only one person had appeared sero-conversion as a H-I titer of 1:80 after post-epidemic season. 7. The E. E. virus could be isolated from the mosquitos pools-C, tritaeniorhyncus which were caught between late July and middle August. 8. E.E. Virus was also isolated from piglet blood on early August and H-I antibody conversion was occurred mostly on middle of August. 9. H-I antibody sero-conversion rate reached to high level when vaccine purified by mouse brain tissue inoculated, showing 98.9%. Higher antibody titer was acquired when booster inoculation was performed, Four fold rise of H-I add N-T antibodies was confirmed with 93.2% and 82.1% respectively.

• Progress in Superconductivity and Cryogenics
• /
• v.1 no.2
• /
• pp.25-29
• /
• 1999

The purpose of this paper is to find the magnetic filed distribution inside the motor in order to find out if the high-Tc superconducting tapes operate stably in actual motor operation in a detailed model of the actual motor was analyzed through F.E.M.(finite Element Method). As a result, it has been proved that the high-Tc superconducting tapes can with-stand 4 A of current with staility. 4 A was the amount of current with stability. 4 A was the amount of current needed to achieve 600 A·turns which is required by the previous simulation aimed at developing this the flux damper reduces armature reactance during the motor operation. But it was observed that the flux damper generates loss by means of leakage flux and this decreases the output of the motor by about 5%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.412-413
• /
• 2006

The electrical conduction mechanism of ITO / Terbium tris - (1 - phenyl - 3 - methyl - 4 - (tertiarybutyryl) - pyrazol - 5 - one) triphenylphosphine oxide [$(tb-PMP)_3Tb-(Ph_3PO)$]/Mg/Al devices has been investigated. The calculation of electric field in single layer organic layer between cathode and anode shows the uniform distribution for the electron injection barrier of over 1.4 eV. The measured current-voltage curve shows well matching with the calculated curve based on the tunneling injection of electron under the uniform distribution of electric field.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.4
• /
• pp.579-588
• /
• 2003

There are many unfavorable conditions that lead to shortening life of cable by causing dielectric breakdown and aging such as field concentrations occurring in intermediate materials linking each cables, penetration of various impurities, and undermining of cable insulation layers. This paper simulated investigated partial discharge properties of XLPE which is widely used for ultra high voltage cable insulation materials and EPDM which is being used as insulation layer of cable joint materials kit, using Boundary Element Method. The result of computer simulation showed that inner-Void defect caused silicone oil to weaken the E-field effect. and we also found that E-field distribution in EPDM remained relatively lower than that in XLPE.

• Steel and Composite Structures
• /
• v.47 no.4
• /
• pp.503-511
• /
• 2023

Stability of laminated plate under thermal load varied linearly along thickness, is developed using a higher order displacement field which depend on a parameter "m", whose value is optimized to get results closest to three-dimension elasticity results. Hamilton, s principle is used to derive equations of motion for laminated plates. These equations are solved using Navier-type for simply supported boundary conditions to obtain non uniform critical thermal buckling and fundamental frequency under a ratio of this load. Many design parameters of cross ply and angle ply laminates such as, number of layers, aspect ratios and E1/E2 ratios for thick and thin plates are investigated. It is observed that linear and uniform distribution of temperature reduces plate frequency.

• The Journal of Society for e-Business Studies
• /
• v.9 no.1
• /
• pp.209-220
• /
• 2004

If protocol has fast operations and short key length, it can be efficient user authentication protocol. Lenstra and Verheul proposed XTR. XTR have short key length and fast computing speed. Therefore, this can be used usefully in complex arithmetic. In this paper, to design efficient user authentication protocol we used a subgroup of Galois Field to problem domain. Proposed protocol does not use GF(p/sup 6/) that is existent finite field, and uses GF(p²) that is subgroup and solves problem. XTR-ElGamal based user authentication protocol reduced bit number that is required when exchange key by doing with upside. Also, proposed protocol provided easy calculation and execution by reducing required overhead when calculate. In this paper, we designed authentication protocol with y/sub i/ = g/sup b.p/sup 2(i-1)//ㆍv mol q, 1(equation omitted) 3 that is required to do user authentication.

• Journal of the Korean Mathematical Society
• /
• v.51 no.5
• /
• pp.881-895
• /
• 2014

In a recent paper [10] we introduced the notion of Levi harmonic map f from an almost contact semi-Riemannian manifold (M, ${\varphi}$, ${\xi}$, ${\eta}$, g) into a semi-Riemannian manifold $M^{\prime}$. In particular, we compute the tension field ${\tau}_H(f)$ for a CR map f between two almost contact semi-Riemannian manifolds satisfying the so-called ${\varphi}$-condition, where $H=Ker({\eta})$ is the Levi distribution. In the present paper we show that the condition (A) of Rawnsley [17] is related to the ${\varphi}$-condition. Then, we compute the tension field ${\tau}_H(f)$ for a CR map between two arbitrary almost contact semi-Riemannian manifolds, and we study the concept of Levi pluriharmonicity. Moreover, we study the harmonicity on quasicosymplectic manifolds.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.2
• /
• pp.165-170
• /
• 2013

This paper presents the iron loss prediction of rotating electric machines taking account of the vector hysteretic properties of electrical steel sheet. The E&S vector hysteresis model is adopted to describe the vector hysteretic properties of a non-oriented electrical steel sheet, and incorporated into finite element analysis (FEA) for magnetic field analysis and iron loss prediction. A permanent magnet synchronous generator is taken as a numerical model, and the analyzed magnetic field distribution and predicted iron loss by using the proposed method is compared with those from a conventional method which employs an empirical iron loss formula with FEA based on a non-linear B-H curve. Through the comparison the effectiveness of the presented method for the iron loss prediction of the rotating machine is verified.