• 한국공간구조학회논문집
• /
• 제18권3호
• /
• pp.75-82
• /
• 2018

Large space structures exhibit different natural vibration characteristics depending on the aspect ratio of structures such as half-open angle. In addition, since the actual large space structure is mostly supported by the lower structure, it is expected that the natural vibration characteristics of the upper structure and the entire structure will vary depending on the lower structure. Therefore, in this study, the natural vibration characteristics of the dome structure are analyzed according to the natural frequency ratio by controlling the stiffness of the substructure. As the natural frequency of the substructure increases, the natural frequency of the whole structure increases similarly to the natural frequency of the upper structure. Vertical vibration modes dominate at $30^{\circ}$ and $45^{\circ}$, and horizontal vibration modes dominate at $60^{\circ}$ and $90^{\circ}$.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제18권1호
• /
• pp.26-32
• /
• 1996

This study was performed to determine the ideal mixing ratio of toothash and plaster of Paris. The histopathologic and histomorphometric study of bone response of five implant materials, toothash(Group A), tooth and plaster mixture, mixing ratio due to weight 2 : 1(Group B), 3 : 1(Group C), 4 : 1(Group D), and plaster Paris(Group E), were performed in rat calvarial defect. No sign of extensive inflammatory reaction was defected. Newly-formed bony ingrowth occurred in all experimental groups except for group E at 12 weeks after operation. Bone was deposited directly on the surface of implant materials. The highest rate of direct bony union between implant material and newly-formed bone occurred with the group B, followed group C, D, and A.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.88-89
• /
• 2017

This paper investigates the design of multi-winding coupled inductor for minimum inductor current ripple in rapid traction battery charger systems. Based on the general circuit model of multi-winding coupled inductor together with the operating principles of dc-dc converter, the relationship between the ripple size of inductor current and the coupling factor is derived under the different duty ratio. The optimal coupling factor which corresponds to a minimum inductor ripple current becomes -(1/n-1), i.e. a complete inverse coupling without leakage inductance, as the steady-state duty ratio operating point approaches 1/n, 2/n, … or (n1)/n. In an opposite manner, the optimal coupling factor value of zero, i.e. zero mutual inductance, is required when the steady-state duty ratio operating point approaches either zero or one.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.191-192
• /
• 2006

The deformation under radial pressure of rectangular dies for metal powder compaction has been investigated by FEM. The explored variables have been: aspect ratio of die profile, ratio between diagonal of the profile and die height, insert and ring thickness, radius at die corners, interference, different insert materials, i. e. conventional HSS, HSS from powders, cemented carbide (10% Co). The analyses have ascertained the unwanted appearance of tensile normal stress on brittle materials, also "at rest", and even some dramatic changes of stress patterns as the die height increases with respect to the rectangular profile dimensions. Different materials behave differently, mainly due to difference of thermal expansion coefficients. Profile changes occur when the dies are heated up to the temperature required for warm compaction. The deformation patterns depend on compaction temperature and thermal expansion coefficients.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.195-196
• /
• 2015

This paper investigates the design of coupled inductor for minimum inductor current ripple in rapid traction battery charger systems. Based on the general circuit model of coupled inductor together with the operating principles of dc-dc converter, the relationship between the ripple size of inductor current and the coupling factor is derived under the different duty ratio. The optimal coupling factor which corresponds to a minimum inductor ripple current becomes -0.5, i.e. a complete inverse coupling without leakage inductance, as the steady-state duty ratio operating point approaches 1/3 or 2/3. In an opposite manner, the optimal coupling factor value of zero, i.e. zero mutual inductance, is required when the steady-state duty ratio operating point approaches either zero or one. Coupled inductors having optimal coupling factor can minimize the ripple current of inductor and battery current resulting in a reliable and efficient operation of battery chargers.

• Composites Research
• /
• 제13권3호
• /
• pp.30-37
• /
• 2000

계면상 조건과 단섬유 함유량 증가에 따른 강화고무의 동적 특성에 대해 실험적 고찰을 하였다. 손실계수는 대체적으로 섬유 함유량 증가에 따라 감소하였고 계면상 조건에 따라 다른 경향을 보였다. 계면 조건이 우수할수록 손실탄성율, $E_2$ 는 낮게 나타났다. 또한 동배율은 섬유 함유량 증가에 따라 감소하였고, 계면상 조건이 우수할수록 크게 감소하였다. 따라서 단섬유 강화고무는 진동수비가 $\sqrt{2}$이상에서 더 큰 진동절연 효과가 있다고 할 수 있다. 손실계수와 동배률의 관계로부터, 자동차의 엔진과 차체의 진동을 절연하는 부품인 Engine Mount Rubber의 적용가능성을 검토하였다.

• 대한기계학회논문집B
• /
• 제30권9호
• /
• pp.882-890
• /
• 2006

The present study investigates the pressure drop characteristics in rotating two-pass ducts. The duct has an aspect ratio (W/H) of 0.5 and a hydraulic diameter $(D_h)$ of 26.67mm. Rib turbulators are attached parallel in the four different arrangements on the leading and trailing surfaces of the test ducts. The ribs have a rectangular cross section of $2m(e){\times}3mm(w)$ and an attack angle of $70^{\circ}C$. The pitch-to-rib height ratio (p/e) is 7.5, and the rib height-to-hydraulic diameter ratio $(e/D_h)$ is 0.075. The results show that the highest pressure drop among each region appears in the turning region for the stationary case, but appears in the upstream region of the second pass for the rotating case. Effects of parallel rib arrangements are almost the same in the first pass for the stationary and rotating cases. In the second pass, however, heat transfer and pressure drop are high for the cases with parallel NN or PP type ribs in the stationary ducts. In the rotating ducts, they are high for the cases with parallel NN or PN type ribs.

• Journal of Communications and Networks
• /
• 제13권4호
• /
• pp.367-376
• /
• 2011

In this paper, we propose self-organizing schemes for the initial configuration of the neighbor cell list (NCL), maintenance of the NCL, and physical cell identifier (PCI) allocation in heterogeneous networks such as long term evolution systems where lower transmission power nodes are additionally deployed in macrocell networks. Accurate NCL maintenance is required for efficient PCI allocation and for avoiding handover delay and redundantly increased system overhead. Proposed self-organizing schemes for the initial NCL configuration and PCI allocation are based on evolved universal terrestrial radio access network NodeB (eNB) scanning that measures reference signal to interference and noise ratio and reference symbol received power, respectively, transmitted from adjacent eNBs. On the other hand, the maintenance of the NCL is managed by adding or removing cells based on periodic user equipment measurements. We provide performance analysis of the proposed schemes under various scenarios in the respects of NCL detection probability, NCL false alarm rate, handover delay area ratio, PCI conflict ratio, etc.

• 동력기계공학회지
• /
• 제15권5호
• /
• pp.43-48
• /
• 2011

The article represents an experimental investigation on friction and turbulent flow characteristics of free airflow through a rectangular duct fitted with semicircular ribs of uniform height (e = 3.5 mm) on one principle wall. The aspect ratio of the rectangular duct was AR= 5 where the duct height (H) was of 30 mm. Four different rib pitches (P) of 28 mm, 35 mm, 42 mm and 49 mm were used for constant rib height to hydraulic diameter ratio (e/Dh = 0.07) and constant rib height to channel height ratio (e/H = 0.11). The experimental results show some significant effects on pressure drop as well as turbulent characteristics at various configurations among different numbers of rib arrangements varying Reynolds number in the range of 15000 to 30000. Pressure transducer and hot wire anemometer were used for data acquisition of this experiment.

• Investigative Magnetic Resonance Imaging
• /
• 제21권3호
• /
• pp.148-153
• /
• 2017

Purpose: To identify the differences between injected cement volumes during vertebroplasty procedures according to the enhancement pattern of pre-procedure magnetic resonance imaging (MRI) findings. Materials and Methods: Thirty-two patients who underwent 52 vertebroplasty procedures as well as pre-procedure contrast-enhanced spine MRI in the authors' institution were reviewed retrospectively. The 52 procedures were divided into two groups according to different enhancement patterns shown by pre-procedure MR imaging [E(+) and E(-)]. The volumes of the enhancing/non-enhancing portions of the fractured vertebral body shown by pre-procedural MR imaging were calculated and compared to the volumes of the injected cement during the vertebroplasty procedures. Results: The 52 injections included 28 (56%) in Group E(+) and 24 (44%) in Group E(-). The actual volume ratio of the injected cement to the volume of the non-enhanced or enhanced region calculated based on the contrast-enhanced MRI was $0.22{\pm}0.11(cc/cm^3)$ in the E(+) group and $0.93{\pm}0.62(cc/cm^3)$ in the E(-) group. The average amount of injected cement was significantly different between Group E(+) and Group E(-) (P < 0.001). In addition, the ratio of the injected cement amount to the volume of the enhanced or non-enhanced portion based on the contrast-enhanced MRI in Group E(-) was significantly higher than that of Group E(+) (P < 0.001). Conclusion: Different enhancement patterns shown by pre-procedure MRI can predictors of the injected cement volume during vertebroplasty procedures for osteoporotic fractures.