• Natural Product Sciences
• /
• v.18 no.4
• /
• pp.273-278
• /
• 2012

Further phytochemical investigation on the whole plant of Thyrsanthera suborbicularis, collected in Cambodia, led to kaempferol (1), vitexin (2), apigenin-7-O-neohesperidoside (3), chrysoeriol-7-O-${\beta}$-D-glucopyranoside (4), isorhamnetin 3-O-rutinoside (5), kaempferol-3-O-[${\alpha}$-L-rhamnopyranosyl-(13)-${\alpha}$-L-rhamnopyranosyl-(16)-${\beta}$-D-galactopyranoside (6), kaempferol-3-O-${\alpha}$-L-rhamnopyranosyl(12)-O-[${\alpha}$-L-rhamnopyranosyl (16)]-${\beta}$-D-glucopyranoside (7), kaempferol-3-O-[6"-O-(E)-p-coumaroyl]-${\beta}$-D-glucopyranoside (8), kaempferol-3-O-[6"-O-(E)-p-coumaroyl]-${\beta}$-D-galactopyranoside (9), and amentoflavone (10). All the structures were confirmed by the interpretation of NMR (1D and 2D) and MS data, and comparison with the published values. Of the isolated compounds 1 - 10, compounds 8 and 10 displayed the inhibitory activity against NO production in LPS-induced Raw 264.7 cells with $IC_{50}$ values, 3.56 and $15.73{\mu}M$, respectively.

• Electrical & Electronic Materials
• /
• v.8 no.1
• /
• pp.35-39
• /
• 1995

After making the light modulator using the BLN-PZT 9.0/65/35 specimen which has the slim-loop hysteresis characteristics and quadratic electro-optic characteristics, switching and spectral response characteristics were investigated. As the results of switching characteristics of the light modulator, it was found that the transmitted light intensity was modulated by both AC and pulse voltage. From the possibility of the selective transmission of the RGB(Red, Green, Blue) spectrum with electric field, the application for the light modulator, light shutter and color filter was expected.

• ETRI Journal
• /
• v.34 no.3
• /
• pp.361-368
• /
• 2012

A complete high-frequency small-signal circuit model of a 40 Gb/s butterfly electroabsorption modulator integrated laser module is presented for the first time to analyze and optimize its electro-optic (E/O) response and reflection characteristics. An agreement between measured and simulated results demonstrates the accuracy and validity of the procedures. By optimizing the bonding wire length and the impedance of the coplanar waveguide transmission lines, the E/O response increases approximately 5% to 15% from 20 GHz to 33 GHz, while the signal injection efficiency increases from approximately 15% to 25% over 18 GHz to 35 GHz.

• Electrical & Electronic Materials
• /
• v.9 no.6
• /
• pp.584-592
• /
• 1996

Coupling optical modulator which on the $LiTaO_3$ substrate is fabricated by using proton exchange method and self-aligned method. Proton exchange of proton diffusion method was applied to pattern a waveguide on $LiTaO_3$ substrate. The annealing at >$400^{\circ}C$ was carded out to control waveguide width and depth. The depths of the two annealed optical waveguides, which were measured by using .alpha.-step, were 1.435 K.angs. and 1.380 K.angs. Using .alpha.-step facility, we examined that the width of waveguides is increased from 5.mu.m to 6.45 .mu.m and 6.3.mu.m due to the annealing effects. The process of proton exchange was done at 150.deg. C for 120 min, >$200^{\circ}C$ for 60 min and annealing process was done at >$400^{\circ}C$ for 90 min, >$400^{\circ}C$ for 60 min. The high speed coupling optical modulator has very good figures of merits; the measured high frequency power were achieved.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.6
• /
• pp.72-78
• /
• 1998

An optical modulator Ti:LiNbO$_3$optical waveguide and CPW electrode structure were fabricated. The optical modulator was packaged using components such as ferrules, dirmy LN block and glass, vibration and shock absorbption pad, and alumina feeder through processings of pigtailing. Au wire bonding, epoxing, SMA connecting, sealing. The electrical and optical characteristics were measured after packaging. The electrical properties of S$_{21}$ and S$_{11}$ were obtained as 9.8 GHz at -3 dB and -8.9dB at 14.4GHz, respectively. Optical waveguide prepared met requirements for a single mode at a 1550nm wavelength range. Insertion loss was 4.3dB at room temperature after packaging, and was varied 4.3~6.4dB at various temperatures, 5~45$^{\circ}C$. E-O bandwidth measurement showed 3dB optical response at 7.8GHz, which means that it is applicable for 10Gbps optical communicationon

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.02a
• /
• pp.291-292
• /
• 2008

We fabricated 40Gbps electroabsorption modulator-integrated DFB lasers (EMLs). Adopting traveling-wave (TW) electrode and tilted facet improved high-frequency characteristics of EMLs. The 3dB bandwidth of E/O response for TW-EML was as large as 34 GHz, as compared with 27 GHz for lumped EML. Tilted facet formed by dry etching processes successfully reduced the optical feedback and the resonance in E/O response decreased to as small as 2.8 dB.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.233-236
• /
• 2001

We have designed and fabricated ASK modulator MMIC operating at 5.8GHz for OBE used in AGPS (Automatic Gate Passing System). ASK modulator MMIC was designed to apply a sing1e supply voltage of 3V to the drain in order to decrease ACP (Adjacent Channel Power). The measurement result of this chip exhibits on/off characteristic over 30dB. The design parameters are optimized through ADS simulation tool. The layouts and fabrication o( ASK Modulator MMIC were designed and fabricated by using ETRI 0.5${\mu}{\textrm}{m}$ MESFET library. The chip sizes were 1mm $\times$1mm. The performance analysis of the implemented ASK Modulator based on the design parameters is accomplished.

• ETRI Journal
• /
• v.26 no.6
• /
• pp.589-596
• /
• 2004

Packaging technologies for a broadband and narrowband modulator with a traveling wave electro-absorption modulator (TWEAM) device were developed. In developing a broadband modulator, the effects of the device and packaging designs on the broadband performance were investigated. The optimized designs were obtained through a simulation with the result that we developed a broadband modulator with a 3 dB bandwidth of 38 GHz in the electrical-to-optical (E/O) response, an electrical return loss of less than -10 dB at up to 26 GHz, an rms jitter of 1.832 ps, and an extinction ratio of 5.38 dB in a 40 Gbps non-return to zero (NRZ) eye diagram. For analog application, the effect of the RF termination scheme on the fractional bandwidth was studied. The microstrip line with a double stub as a matching circuit and a laser trimming process were used to obtain an $S_{11}$ of -34.58 dB at 40 GHz and 2.9 GHz bandwidth of less than -15 dB.

• Electrical & Electronic Materials
• /
• v.8 no.4
• /
• pp.443-450
• /
• 1995

A directional coupler which on the X-cut $LiNbO_3$ substrate is fabricated by using proton exchange method and self-aligned method. After proton exchange process, the waveguide is formed by annealing process. The relation ship between refractive index change of waveguide and maximum output was studied along with the annealing time. A self-aligned method was used to simplify the fabrication process of the waveguide and to maximize the efficiency of electric field. The on-off state of modulator has been observered with the switching of the directional coupler by the electric field effect and also the switching voltage of the directional coupler has been measured with 8.0 [V].

• Electrical & Electronic Materials
• /
• v.6 no.1
• /
• pp.8-13
• /
• 1993

본 연구에서는 단일 광 변조기를 양자교환과 자기정열 방식을 이용하여 X-cut NiNbO$_{3}$기판에 제작하였다. 여기에서 어닐링 처리 효과는 단일 광 변조기에서 도파로의 굴절율 변화 특성을 나타냈으며 특히 어닐링 처리 시간의 조절에 의해서 단일 광 도파로가 광범위하게 변화된다는 것을 알았다. 이것을 기초로하여 광 변조기는 어닐링 공정 및 자기 정열방식에 의한 최적화와 간단화를 제작 공정에 응용 할 수 있었다.