• Journal of the Earthquake Engineering Society of Korea
• /
• v.1 no.1
• /
• pp.79-88
• /
• 1997

Very stiff floor system in a residential-commercial building causes some problems in the numerical analysis procedure due to significant difference in stiffness with adjacent elements. Static analysis of structure with a stiff transfer-floor can be performed approximately in two steps for upper and lower parts for the structure. However, it is impossible to perform dynamic analysis in two steps with separate models. An efficient method for dynamic analysis of a structure with a right floor system is proposd in this study. The matrix condensation technique is employed to reduce the degree of freedom for upper and lower parts of the structure and a beam elements with rigid bodies at both ends are introduce to model the rigid floor system. Efficiency and accuracy of the proposed method are verified through analysis of several example structures.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.29 no.1
• /
• pp.39-55
• /
• 1993

Modal Analysis is the process of characterizing the dynamic properties of an elastic structure by identifying its modes of vibration. A mode of vibration is a global property of an elastic structure. That is, a mode has a specific natural frequency and damping factor which can be identified from response data at practically any point on a structure, and it has a characteristic mode shape which identifies the mode spatially over the entire structure. Modal testing is able to be performed on structural and mechanical structure in an effort to learn more about their elastic behavior. Once the dynamic properties of a structure are known its behavior can be predicted and therefore controlled or corrected. Resonant frequencies, damping factors and mode shape data can be used directly by a mechanical designer to pin point weak spots in a structure design, or this data can also be used to confirm or synthesize equations of motion for the elastic structure. These differential equations can be used to simulate structural response to know input forces and to examine the effects of pertubations in the distributed mass, stiffness and damping properties of the structure in more detail. In this paper the measurement of transfer functions in digital form, and the application of digital parameter identification techniques to identify modal parameters from the measured transfer function data are discussed. It is first shown that the transfer matrix, which is a complete dynamic model of an elastic plate structure can be written in terms of the structural modes of vibration. This special mathematical form allows one to identify the complete dynamics of the structure from a much reduced set of test data, and is the essence of the modal approach to identifying the dynamics of a structure. Finally, the application of transfer function models and identification techniques for obtaining modal parameters from the transfer function data are discussed. Characteristics on vibration response of elastic plate structure obtained from the dynamic analysis by Finite Element Method are compared with results of modal analysis.

• International Journal of Automotive Technology
• /
• v.6 no.1
• /
• pp.65-70
• /
• 2005

Pressure ripples, which are inevitably generated by a fluctuation of flow rate caused by a pump mechanism, include noises and vibrations in hydraulic pipeline. These noises and vibration deteriorate the stability and accuracy of hydraulic systems. The accumulator and hydraulic attenuator are normally used to reduce the pressure ripples. In this study, a parallel line is introduced to the hydraulic pipeline for the hydraulic system with a bent-axis piston pump as a method to reduce the pressure ripples. The dynamic characteristics of the hydraulic pipeline with a parallel line are analyzed by a transfer matrix in the frequency domain. The usefulness of the hydraulic pipeline with a parallel line was ascertained by experiment and simulation. The results from the experiment and simulation show that the hydraulic pipeline with a parallel line were effective in reducing the pressure ripples.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.272-277
• /
• 1990

A soft switched matrix converter is proposed by adopting the zero voltage switching technique being used in some resonant pole inverters. High operating frequency with safe and efficient switching improves dynamic and spectral performances and simplifies protection logics and snubber networks. Further, it can be implemented using simple analog circuits, having similar transfer characteristics to those of the modern pulse width modulated matrix converters such as, maximum voltage transfer ratio and unity input displacement factor. Analyses, design and simulation results are presented to verify the operating principle.

• Journal of KSNVE
• /
• v.8 no.6
• /
• pp.1069-1077
• /
• 1998

A dynamic model of turbo compressor having helical gear pairs is developed. The model accounts for the shaft and bearing flexibilities, gyroscopic effects and the force couplings among the transverse, torsion. and axial motions due to gearings. For the mode analysis of turbo compressor, a transfer matrix method is used. The excitation sources caused by the mass unbalances of the rotors and misalignment of the shafts, the transmitted errors of the gearings. and the vane passing frequencies of the Impeller are studied qualitatively. By introducing the perturbation method, the generated forcing frequencies are defined and devided into three groups. With the field data, two critical speeds are analytically found and the corresponding modal characteristics are examined.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.3
• /
• pp.328-336
• /
• 1998

Marine reduction gears are usually used to increase the propulsion efficiency of propellers for ships powered by medium and small sized high speed diesel engines. Most of shaft systems adopt flexible couplings to absorb the transmitted vibratory torque from the engines to the reduction gears and to prevent the chattering phenomenon of reduction gears. However some elastic couplings show non-linear characteristics due to the variable torque transmitted from the main engines and the change of ambient temperature. In this study dynamic characteristics of flexible couplings sare investigated and their effects upon various vibratory conditions of propulsion systems are clarified. A calculation program of torsional vibration for the propulsion systems are clarified. A calculation program of Results of the program developed are compared with ones of the existing linear method and propulsion systems with the elastic couplings the transfer matrix method is adopted which is found to give satisfied results.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.332-335
• /
• 1995

A simple and effective method for improving Euclidean norm condition number for chemical processing system is presented. The singular value sensitivities of Freudenberg et al. (1982) is used to estimate the behavior of singular values of process transfer function matrix when design parameter is changed, then the condition number can be calculated straightforwardly. The method requires explicit dependencies of each transfer function matrix elements on design parameters. These dependencies can be obtained either by symbolic differentiation in the form of explicit function of design parameters, or by numerical perturbation studies for units with large and complicated models. Gerschgorin-type lower bound for minimum singular value is introduced to detect the large divergencies near singular point due to linearity of sensitivities. The case studies are performed to show the efficiency of the proposed method.

• Journal of Power System Engineering
• /
• v.5 no.4
• /
• pp.31-37
• /
• 2001

Pressure propagation and attenuation characteristics in a hydraulic pipeline with a bellows type accumulator was investigated by theoretical analyses and experiments. In the first stage of the study, equations to evaluate the amount of oil volume charged into the bellows together with nitrogen gas were proposed. In the next stage, the authors suggested a mathematical model based on transfer matrix method to describe the dynamic characteristics of the pipe element with a metal bellows type accumulator. Through comparisons and considerations of the experimental and the numerical data shown in frequency domain, the validity of the mathematical model was confirmed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.169-175
• /
• 1997

Recently it is increased by degrees to produce complex and large lattice structures such as bridge, tower, crane, and space structures. In general, in order to analyse these structures we have used finite element method(FEM). In this method, however, it is necessary to use a large amount of computer memory and to take long computation time. For overcoming this problem, the Authors have developed the transfer dynamic stiffness coefficient method(TDSCM) which consists on the concept of the substructure synthesis method and transfer influence coefficient method. In this paper, the new free vibration analysis method for large type lattice structure is formulated by the TDSCM. And the results obtained by TDSCM are compared with those obtained by FEM, transfer matrix method and experiment. And it is confirmed for TDSCM to be the numerical high accuracy and high speed structure analysis method.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.2
• /
• pp.339-348
• /
• 1990

Techniques which are able to predict and control dynamic characteristics, not affecting the vibrational characteristics on the modification of structural design, are being studied. As one of these techniques, experimental modal analysis is widely applied by many researchers. In this study, modal analysis is performed using transfer matrix method by a macro computer. The developed program would estimate the structural modal parameters precisely, and the validity of this program is certified by comparing with the experimental results of .GAMMA A. structure. Estimated modal parameters(natural frequency, vibrational mode, equivalent mass, etc.) are in accord with the experimental results. Also, the optimal location of the additive mass is determined by the evaluation of the vibrational mode and the equivalent mass. The relation between the additive mass and the equivalent mass is specified, and we come to know that the ratio of equivalent mass to additive mass alter linearly within the range of 20%.