• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.4
• /
• pp.733-744
• /
• 2012

Dynamic threshold public-key encryption provides dynamic setting of the group of all users, receivers and the threshold value. Over recent years, there are many studies on the construction of scheme, called ID-based dynamic threshold encryption, which combines the ID-based encryption with dynamic threshold encryption. In this paper, we analyze the ID-based dynamic threshold encryption proposed by Xing and Xu in 2011, and show that their scheme has a structural problem. We propose a conversion method from ID-based encryption which uses the bilinear map to ID-based dynamic threshold encryption. Additionally, we prove this converted scheme has CPA security under the full model.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.10
• /
• pp.24-33
• /
• 2001

Delay, delay variation and packet loss rate are principal QoS(Quality of Service) elements of packet communication. This paper proposes a new buffer allocation mechanism to improve the packet loss performance in such a situation that multiple logical buffers share a single physical memory buffer. In the proposed buffer allocation mechanism, the movement of dynamic threshold follows a curved track instead of a straight line which is used in the DT(dynamic threshold) mechanism. In order evaluate the effectiveness of the proposed mechanism, it is compared with the existing previously proposed mechanisms in several aspects including NC(no control), ST(Static Threshold) and DT mechanisms.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1235-1238
• /
• 2004

Thresholding has been used to reduce the number of gray values in images. Typically, a single threshold value has been used, resulting in two gray level images. Image reduction of one single threshold value, however, may lose too much of the high-frequency edge information. Thus, dynamic thresholding that uses a different threshold for each pixel is preferred instead of using a single threshold value. Dynamic thresholding can preserve high frequency details as well as reduce the size of images. Since it takes long time to perform existing software dynamic thresholding in an embedded system, this paper proposes and implements a circuit by using a FPGA in order to perform a real-time dynamic thresholding,. The proposed circuit consists of two counters, and threshold look-up table, and control unit. The values of two counters determine each pixel position, the threshold look-up table converts each pixel value into other value, and the control unit generates necessary control signals. On arriving from a camera to the proposed circuit, each pixel is compared with its threshold value and is converted into other gray value. An image processing system by using the proposed circuit will be implemented and some experiments will be performed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.11
• /
• pp.2597-2615
• /
• 2013

This paper proposes a dynamic downlink load control scheme that jointly employs dynamic load threshold management and virtual coverage management schemes to reduce the degree of performance degradation due to traffic overload in two-tier femtocell networks. With the proposed scheme, the downlink load in a serving macrocell is controlled with a load threshold which is adjusted dynamically depending on the varying downlink load conditions of neighboring macrocells. In addition, traffic overloading is alleviated by virtually adjusting the coverage of the overloaded serving macrocell, based on the adjusted load threshold of the serving macrocell. Simulation results show that the proposed scheme improves the performance of two-tier femtocell networks in terms of the outage probability and sum throughput. This improvement is significantly increased with appropriate values of load thresholds and with an intermediate-level adjustment of the virtual coverage area (i.e., handover hysteresis margin: HOM). Furthermore, the proposed scheme outperforms both a previously proposed load control scheme with a static load threshold and the LTE system without a HOM adjustment.

• ETRI Journal
• /
• v.40 no.4
• /
• pp.531-536
• /
• 2018

The weighted K-nearest neighbor (WKNN) algorithm is used to reduce positioning accuracy, as it uses a fixed number of neighbors to estimate the position. In this paper, we propose a dynamic threshold location algorithm (DH-KNN) to improve positioning accuracy. The proposed algorithm is designed based on a dynamic threshold to determine the number of neighbors and filter out singular reference points (RPs). We compare its performance with the WKNN and Enhanced K-Nearest Neighbor (EKNN) algorithms in test spaces of networks with dimensions of $20m{\times}20m$, $30m{\times}30m$, $40m{\times}40m$ and $50m{\times}50m$. Simulation results show that the maximum position accuracy of DH-KNN improves by 31.1%, and its maximum position error decreases by 23.5%. The results demonstrate that our proposed method achieves better performance than other well-known algorithms.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.5
• /
• pp.529-536
• /
• 1991

In this paper, the question whether the curvature of the minimum energy path can affect the dynamic threshold was tested using the boundary trajectory method developed by Chesnavich and coworkers. For nonreactive system, the MO EXP model potential surface was used with modified equilibrium distance to control the curvature. The results showed that there is no relation between the curvature and the dynamic threshold. In order to study the reactive system, a generalization of the boundary trajectory method was achieved to apply on the nonsymmetric system. We have found no correspondence between the curvature and the dynamic threshold of the system. It was also shown that the fate of the trajectories strongly depends on the shape of potential surface around the turning points along the symmetric stretch line.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.2 s.19
• /
• pp.5-10
• /
• 2007

According to the advantageous features of flash memory, its exploitation and application in mobile and ubiquitous related devices as well as voluminous storage devices is being increased rapidly. The inherent properties that are determined by configuration of flash memory unit might restrict the promising expansion in its utilization. In this paper, we study policies based on threshold values, instead of using global search, in order to satisfy our objective that is to decrease the necessary processing cost or penalty for recycling of flash memory space at the same time minimizing the potential degradation of performance. The proposed cleaning methods create partitions of candidate memory regions, to be reclaimed as free, by utilizing global or dynamic threshold values. The impact of the proposed policies is evaluated through a number of experiments, the composition of the optimal configuration featuring the methods is tested through experiments as well.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.438-441
• /
• 2004

Image binarization using a global threshold value [3] performs at high speed, but usually results in undesired binary images when the source images are of poor quality. In such cases, adaptive local thresholding algorithms [1][2][3] are used to obtain better results, and the algorithm proposed by A.E.Savekis which chooses local threshold using fore­ground and background clustering [1] is one of the best thresholding algorithms. However, this algorithm runs slowly due to its re-computing threshold value of each central pixel in a local window MxM. In this paper, we present a dynamic programming approach for the step of calculating local threshold value that reduces many redundant computations and improves the execution speed significantly. Experiments show that our proposal improvement runs more ten times faster than the original algorithm.

• ETRI Journal
• /
• v.37 no.4
• /
• pp.736-742
• /
• 2015

A serial concatenated decoding algorithm with dynamic threshold is proposed for low-density parity-check codes with short and medium code lengths. The proposed approach uses a dynamic threshold to select a decoding result from belief propagation decoding and order statistic decoding, which improves the performance of the decoder at a negligible cost. Simulation results show that, under a high SNR region, the proposed concatenated decoder performs better than a serial concatenated decoder without threshold with an Eb/N0 gain of above 0.1 dB.

• Journal of Communications and Networks
• /
• v.5 no.1
• /
• pp.82-89
• /
• 2003

In this paper, an efficient threshold-based filtering (TF) buffer management scheme is proposed. The TF is capable of minimizing the overall loss performance and improving the fairness of buffer usage in a shared buffer packet switch. The TF consists of two mechanisms. One mechanism is to classify the output ports as sctive or inactive by comparing their queue lengths with a dedicated buffer allocation factor. The other mechanism is to filter the arrival packets of inactive output ports when the total queue length exceeds a threshold value. A theoretical queuing model of TF is formulated and resolved for the overall packet loss probability. Computer simulations are used to compare the overall loss performance of TF, dynamic threshold (DT), static threshold (ST) and pushout (PO). We find that TF scheme is more robust against dynamic traffic variations than DT and ST. Also, although the over-all loss performance between TF and PO are close to each other, the implementation of TF is much simpler than the PO.