• 제목/요약/키워드: Dynamic shear modulus

검색결과 253건 처리시간 0.037초

사질토 전단탄성계수 감소곡선 산정을 위한 경험식 제안 (A Suggestion of an Empirical Equation for Shear Modulus Reduction Curve Estimation of Sandy Soils)

  • Park, Dug-Keun
    • 한국지반공학회논문집
    • /
    • 제18권3호
    • /
    • pp.126-126
    • /
    • 2002
  • 지진에 의한 지반거동 및 지반-구조물 상호작용 등 지반동역학적 문제분석을 위해서는 정확한 동적 토질전단탄성계수의 획득이 필수적이다. 본 연구에서는 기존의 자료를 조사분석하여 어떤 변형율에서도 활용할 수 있는 사질토 전단탄성계수 감소곡선을 위한 경험식을 제안하였다. 비소성 토질의 전단탄성계수 감소곡선의 위치와 모양은 평균유효구속압에 주로 영향을 받으므로 본 연구에서는 이 영향요소 및 최대전단탄성계수를 이용하여 변형을 증가에 의한 전단탄성계수 감소를 산정할 수 있는 방정식을 형성하였다. 최대전단탄성계수가 측정되면 제안된 식을 이용하여 특정 변형을 및 구속압에서 감소된 전단탄성계수를 산출할 수 있을 것이다.

사질토 전단탄성계수 감소곡선 산정을 위한 경험식 제안 (A Suggestion of an Empirical Equation for Shear Modulus Reduction Curve Estimation of Sandy Soils)

  • Park, Dug-Keun
    • 한국지반공학회논문집
    • /
    • 제18권3호
    • /
    • pp.127-138
    • /
    • 2002
  • 지진에 의한 지반거동 및 지반-구조물 상호작용 등 지반동역학적 문제분석을 위해서는 정확한 동적 토질전단탄성계수의 획득이 필수적이다. 본 연구에서는 기존의 자료를 조사분석하여 어떤 변형율에서도 활용할 수 있는 사질토 전단탄성계수 감소곡선을 위한 경험식을 제안하였다. 비소성 토질의 전단탄성계수 감소곡선의 위치와 모양은 평균유효구속압에 주로 영향을 받으므로 본 연구에서는 이 영향요소 및 최대전단탄성계수를 이용하여 변형을 증가에 의한 전단탄성계수 감소를 산정할 수 있는 방정식을 형성하였다. 최대전단탄성계수가 측정되면 제안된 식을 이용하여 특정 변형을 및 구속압에서 감소된 전단탄성계수를 산출할 수 있을 것이다.

Nonlinear dynamic properties of dynamic shear modulus ratio and damping ratio of clay in the starting area of Xiong'an New Area

  • Song Dongsong;Liu Hongshuai
    • Earthquakes and Structures
    • /
    • 제26권2호
    • /
    • pp.97-115
    • /
    • 2024
  • In this paper, a database consisting of the dynamic shear modulus ratio and damping ratio test data of clay obtained from 406 groups of triaxial tests is constructed with the starting area of Xiong'an New Area as the research background. The aim is to study the nonlinear dynamic properties of clay in this area under cyclic loading. The study found that the effective confining pressure and plasticity index have certain influences on the dynamic shear modulus ratio and damping ratio of clay in this area. Through data analysis, it was found that there was a certain correlation between effective confining pressure and plasticity index and dynamic shear modulus ratio and damping ratio, with fitting degree values greater than 0.1263 for both. However, other physical indices such as the void ratio, natural density, water content and specific gravity have only a small effect on the dynamic shear modulus ratio and the damping ratio, with fitting degree values of less than 0.1 for all of them. This indicates that it is important to consider the influence of effective confining pressure and plasticity index when studying the nonlinear dynamic properties of clays in this area. Based on the above, prediction models for the dynamic shear modulus ratio and damping ratio in this area were constructed separately. The results showed that the model that considered the combined effect of effective confining pressure and plasticity index performed best. The predicted dynamic shear modulus ratio and damping ratio closely matched the actual curves, with approximately 88% of the data falling within ±1.3 times the measured dynamic shear modulus ratio and approximately 85.1% of the data falling within ±1.3 times the measured damping ratio. In contrast, the prediction models that considered only a single influence deviated from the actual values, particularly the model that considered only the plasticity index, which predicted the dynamic shear modulus ratio and the damping ratio within a small distribution range close to the average of the test values. When compared with existing prediction models, it was found that the predicted dynamic shear modulus ratio in this paper was slightly higher, which was due to the overall hardness of the clay in this area, leading to a slightly higher determination of the dynamic shear modulus ratio by the prediction model. Finally, for the dynamic shear modulus ratio and damping ratio of the engineering site in the starting area of Xiong'an New Area, we confirm that the prediction formulas established in this paper have high reliability and provide the applicable range of the prediction model.

동전단 마스터곡선을 이용한 아스팔트 바인더의 노화 특성 평가 (Characteristics of Dynamic Shear Modulus Mastercurve of Aged or Unaged Asphalt Binders)

  • 윤태영;함상민;유평준
    • 한국도로학회논문집
    • /
    • 제15권1호
    • /
    • pp.87-94
    • /
    • 2013
  • PURPOSES: To characterize the aging effect on asphalt binder, dynamic shear modulus mastercurve of two typical asphalt binders are developed. METHODS: To develop dynamic shear modulus mastercurve, dynamic shear modulus at high temperature and creep stiffness at low temperature are measured by temperature sweep test and bending beam rheometer test, respectively. RESULTS: It is observed that the aging effect on asphalt binder can be clearly observed from dynamic shear modulus mastercurve and the mastercurve can be utilized to predict behavior of asphalt binder at wide range of temperature. CONCLUSIONS: It is confirmed that SBS 5% modified binder has more desirable mechanical property at low and high temperature as a pavement material comparing to PG64-22 binder and the mastercurve is an effective tool to evaluate the property of asphalt binder.

급속 동결 융해에 대한 콘크리트의 저항 시험방법(KS F 2456)에 전단파 적용을 위한 실험적 연구 (A Experimental Study on Application of KS F 2456 using Shear Wave)

  • 안지환;전성일;권수안
    • 한국도로학회논문집
    • /
    • 제14권5호
    • /
    • pp.57-65
    • /
    • 2012
  • PURPOSES: It is important to consider the long-term performance of concrete pavement, because concrete pavement is more exposed to the various environmental conditions than any other concrete structures. One of the several methods to evaluate the long-term performance of concrete during winter is KS F 2456. Relative dynamic modulus of elasticity shows the resistance to freezing and thawing. METHODS: To measure relative dynamic modulus of elasticity, ultra sonic is generally used. But in this study, to measure the relative dynamic modulus of elasticity, both ultra sonic and shear wave were used and then compared each other. RESULTS: The results from the measurement by ultrasonic wave and shear wave were divided into three types. Type 1 : Specimens are good and relative dynamic modulus of elasticity did not decrease until 300 cycle. Type 2 : The relative dynamic modulus of elasticity decreased from the late cycle.(about 150 cycle later) Type 3 : The relative dynamic modulus of elasticity consistently decreased from the beginning. As a result of ANOVA, there is no difference according to measuring method, in type 2 and 3. But there is a difference according to measuring method, in type 1's relative dynamic modulus of elasticity. CONCLUSIONS: It is proved that shear wave can be used to understand the damage tendency of relative freezing and thawing and to measure the relative dynamic modulus of elasticity.

다짐점성토(粘性土)의 동적전단탄성계수(動的剪斷彈性係數) (Dynamic Shear Modulus of Compacted Clayey Soil)

  • 강병희
    • 대한토목학회논문집
    • /
    • 제3권2호
    • /
    • pp.109-117
    • /
    • 1983
  • 구속응력(拘束應力), 전단변형율진폭(剪斷變形率振幅), 다짐함수비(含水比), 다짐에너지, 간극비(間隙比) 및 포화도(飽和度)가 다짐점성토(粘性土)의 동적전단탄성계수(動的剪斷彈性係數)에 끼치는 영향(影響)을 연구(硏究)하기 위하여 도주공진시험(圖柱工振試驗)을 하였다. 이들 각각(各各)의 요소(要素)들은 다짐 흙의 동적전단탄성계수(動的剪斷彈性係數)에 큰 영향(影響)을 나타내며 그 원인(原因)은 다짐에 의한 흙의 여러 가지 변화(變化)로서 설명(說明)할 수 있다. 흙의 동적전단탄성계수(動的剪斷彈性係數)는 다짐에 의해서 크게 증가(增加)되며 최적함수비(最適含水比) 건조측(乾燥側)의 함수비(含水比)에서 다지는 것이 훨씬 더 효과적(効果的)이다. 그리고 동적(動的) 전단탄성계수(剪斷彈性係數)와 정적(靜的) 전단탄성도(剪斷彈性度)는 좋은 상관관계(相關關係)를 나타내며 이를 이용(利用)하여 어떤 일정(一定)한 구속응력(拘束應力)에 대한 동적전단탄성계수(動的剪斷彈性係數)를 일축압축강도(一軸壓縮强度)로부터 쉽게 구할 수가 있다.

  • PDF

Dynamic shear modulus and damping ratio of saturated soft clay under the seismic loading

  • Zhen-Dong Cui;Long-Ji Zhang;Zhi-Xiang Zhan
    • Geomechanics and Engineering
    • /
    • 제32권4호
    • /
    • pp.411-426
    • /
    • 2023
  • Soft clay is widely distributed in the southeast coastal areas of China. Many large underground structures, such as subway stations and underground pipe corridors, are shallow buried in the soft clay foundation, so the dynamic characteristics of the soft clay must be considered to the seismic design of underground structures. In this paper, the dynamic characteristics of saturated soft clay in Shanghai under the bidirectional excitation for earthquake loading are studied by dynamic triaxial tests, comparing the backbone curve and hysteretic curve of the saturated soft clay under different confining pressures with those under different vibration frequencies. Considering the coupling effects of the confining pressure and the vibration frequency, a fitting model of the maximum dynamic shear modulus was proposed by the multiple linear regression method. The M-D model was used to fit the variations of the dynamic shear modulus ratio with the shear strain. Based on the Chen model and the Park model, the effects of the consolidation confining pressure and the vibration frequency on the damping ratio were studied. The results can provide a reference to the earthquake prevention and disaster reduction in soft clay area.

토질 최대전단탄성계수($G_{max}$)에 미치는 시간지속효과 및 그 영향요소에 관한 연구 (Effect of Duration of Confinement and Its Affecting Factors on the Low-Amplitude Shear Modulus ($G_{max}$) of Soils)

  • 박덕근
    • 지질공학
    • /
    • 제9권2호
    • /
    • pp.135-145
    • /
    • 1999
  • 동적 하중을 받는 지반반응 평가시 필요한 가장 중요한 변수 중에 하나가 지반의 전단탄성계수(G)이다. 지반의 동특성은 시간에 따라 변화하게 되는데, 이 점은 흔히 간과되어져 왔다. 이번 연구를 통하여 일정구속압에서 시간에 따라 변하는 토질 최대전단탄성계수($G_{max}$) 및 그 영향요소에 관해 고찰해보고 몇몇 경험식을 제안하고자 한다. 경험식 작성을 위해 고려된 요소는 선행응력과 선행변형율, 입자크기와 지속응력, 소성지수 등이고, 실제로 가장 큰 영향을 미치는 평균입자직경과 소성지수를 이용한 두개의 경험식을 작성하였다. 끝으로 $G_{max}$의 일시적 변화와 그 원인, 그리고 시간에 따라 증가하는 G가 시사하는 점에 대해 서술한다

  • PDF

섬유보강 실트질 모래의 동적 변형특성 (Dynamic Deformation Characteristics of Fiber Mixed Silty Sand)

  • 허준;장병욱
    • 한국농공학회논문집
    • /
    • 제47권6호
    • /
    • pp.59-70
    • /
    • 2005
  • A series of resonant column test was performed to investigate the dynamic deformation characteristics of silty sand soils mixed with polypropylene fibrillated type fiber. Results show that optimum mixing ratios were $0.2\%$ for 19mm of cut fiber for shear modulus and $0.1\%$ for 60mm cut fiber fur damping ratio. As shear strain was increased, normalized values of shear modulus (G(Reinforced)/ G(Unreinforced)) of fiber reinforced soil were increased up to $10^{-3}\%\~10^{-1}\%$ ranges. However, normalized damping ratio (D(Reinforced/D(Unreinforced)) was diminished with an increase in strain beyond $10^{-3}\%\~10^{-1}\%$ for the damping capacity of soils mixed with fiber. Normalized shear modulus $(G/G_{max})$ obtained from the test was plotted in the chart suggested by Seed and Idriss. The shear modulus of silty sand was located between sand and gravel curves.

An experimental investigation on dynamic properties of various grouted sands

  • Hsiao, Darn-Horng;Phan, Vu To-Anh;Huang, Chi-Chang
    • Geomechanics and Engineering
    • /
    • 제10권1호
    • /
    • pp.77-94
    • /
    • 2016
  • Cyclic triaxial and resonant column tests were conducted to understand the beneficial effects of various grouted sands on liquefaction resistance and dynamic properties. The test procedures were performed on a variety of grouted sands, such as silicate-grouted sand, silicate-cement grouted sand and cement-grouted sand. For each type of grout, sand specimen was mixed with a 3.5% and 5% grout by volume. The specimens were tested at a curing age of 3, 7, 28 and 91 days, and the results of the cyclic stress ratio, the maximum shear modulus and the damping ratio were obtained during the testing program. The influence of important parameters, including the type of grout, grout content, shear strain, confining pressure, and curing age, were investigated. Results indicated that sodium silicate grout does not improve the liquefaction resistance and shear modulus; however, silicate-cement and cement grout remarkably increased the liquefaction resistance and shear modulus. Shear modulus decreased and damping ratio increased with an increase in the amplitude of shear strain. The effect of confining pressure on clean sand and sodium silicate grouted sand was found to be insignificant. Furthermore, a nonlinear regression analysis was used to prove the agreement of the shear modulus-shear strain relation presented by the hyperbolic law for different grouted sands, and the coefficients of determination, $R^2$, were nearly greater than 0.984.