• 제목/요약/키워드: Dynamic resolution

검색결과 549건 처리시간 0.035초

개선된 선형성과 해상도를 가진 10비트 전류 출력형 디지털-아날로그 변환기의 설계 (Monolithic and Resolution with design of 10bit Current output Type Digital-to-Analog Converter)

  • 송준계;신건순
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2007년도 추계종합학술대회
    • /
    • pp.187-191
    • /
    • 2007
  • 본 논문은 상위 7비트와 하위3비트의 binary-thermal decoding 방식과 segmented 전류원 구조로서 전력소모, 선형성 및 글리치 에너지등 주요 사양을 고려하여, 3.3V 10비트 CMOS D/A 변환기를 제안한다. 동적 성능을 향상 시키기위해 출력단에 return-to-zero 회로를 사용하였고, segmented 전류원 구조와 최적화 된 binary-thermal decoding 방식으로 D/A변환기가 가질 수 있는 장점은 디코딩 논리회로의 복잡성을 단순화 함으로 칩면적을 줄일 수 있다. 제안된 변환기는 $0.35{\mu}m$ CMOS n-well 표준공정을 이용한다. 설계된 회로의 상승/하강시간, 정착시간, 및 INL/DNL은 각각 1.90/2.0ns, 12.79ns, ${\pm}2.5/{\pm}0.7$ LSB로 나타난다. 또한 설계된 D/A 변환기는 3.3V의 공급전원에서는 250mW의 전력소모가 측정 된다.

  • PDF

적응 템플릿 필터링에서 복셀의 부분 볼륨 효과로 인한 헤지 아티팩트의 제거 (Removal of Edge Artifact due to Pertial Volume Effect in the Adaptive Template Filtering)

  • 안창범;송영철
    • Investigative Magnetic Resonance Imaging
    • /
    • 제4권2호
    • /
    • pp.120-127
    • /
    • 2000
  • 최근에 해상도의 손실없이 신호대잡음비를 개선시킬 수 있는 적응 템플릿 필터링이 제안되었다. 적응 템플릿 필터링은 다중 템플릿들 중에서 현재 복셀의 주변 구조와 가장 잘 매칭이 되는 템플릿을 선택하여 적응필터 링을 적용하는 방법이다. 적응 템플릿 필터링을 자기공명영상에 적용할때 기존의 필터링 방법들에 비하여 향상된 결과를 얻을 수 있으나, $T_1$ 영상과 같이 비교적 작은 동적 범위를 가진 영상에서는 에지에서 계단모양의 artifact가 발견되곤 한다. 이것은 자기 공명영상에서 복셀의 부분적인 볼륨 효과에 기인하는 것으로 여러 조직의 성분을 포함하고 있는 경계면의 복셀들에 적응 템플릿 필터링이 적용될 경우 다중성분을 가진 복셀들의 그레이레벨이 인접한 단일성분의 그레이레벨 값에 가까워져 에지가 강조되기 때문이다 본 논문에서는 다중 성분을 갖는 복셀들을 선별하여 이들에 대해서는 가장 큰 크기의 템플릿을 할당함으로써 artifact를 제거하는 방법을 제안하였다. 제안한 방법을 $T_1$ 자기공명영상과 팬텀 영상에 적용한 결과 에지 artifact가 사라지는 것을 확인할 수 있었으며, 최대 신호대잡음비 면에서도 향상된 결과를 얻을 수 있었다.

  • PDF

HadGEM3-RA 자료의 극치수문변수에 대한 검증 (The Verification for Extreme Hydrological Variables of HadGEM3-RA)

  • 성장현;강현석;박수희;조천호;김영오
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2011년도 학술발표회
    • /
    • pp.122-122
    • /
    • 2011
  • 수자원 분야에서 기후변화 관련 연구는 치수 측면 보다는 이수 측면에서 주로 이뤄지고 있다. 이는 홍수분석을 위한 시간 단위를 충족시켜주는 전지구 대기순환모형(Global Circulation Model: GCM)의 자료가 드물고, 시간 단위의 GCM 자료라 하더라도 극치값(extreme value) 표현에는 한계가 있기 때문이다. 이를 극복하기 위하여 과거 관측자료의 통계적 특성으로 극치자료의 편의(bias)를 보정하고 시간 단위로 분해하기도 한다. 하지만 이런 통계적 상세화(statistical downscaling)는 미래 기후는 과거자료와 통계적 차이가 유의하지 않음을 가정하고 있어, 미래 기후는 현재와 다를 것이라는 공감대에 는 적합하지 않다. 이와 같은 이유로 타당한 극치수문변수 결과를 얻기 위해서는 시간 단위의 고분해능(high resolution) GCM이나 지역기후모델(regional climate model)과 같은 고해상도의 미래 기후변화 자료가 필요하게 된다. 이에 국립기상연구소에서는 영국 기상청의 통합모델(UM)기반의 지역기후모델(HadGEM3)을 사용하여 50 km 및 12.5 km 격자 단위로 역학적 상세화(dynamic downscaling)를 수행하였다. 본 연구에서는 개발된 HadGEM3-RA 결과의 극치수문변수 검증을 위하여 한강유역의 관측 자료와 다양한 방법으로 비교하였다. 두 자료의 극치값을 GEV (Generalized Extreme Value) 분포에 적합(fitting)시켜 비초과확률별 극치사상과, 특정 임계값(threshold value) 이상의 극치사상 발생확률을 비교하였다. 검토 결과, HadGEM3-RA는 통계적 상세화로 구한 극치값 보다는 작았으나 기존의 지역 기후모델에 비하여 현실성 있는 극치값이 계산되었음을 확인하였다.

  • PDF

지상 기반 듀얼 밴드 라디오미터의 운영 및 활용 가이던스 (Operation and Application Guidance for the Ground Based Dual-band Radiometer)

  • 전은희;김연희;김기훈;이희상
    • 대기
    • /
    • 제18권4호
    • /
    • pp.441-458
    • /
    • 2008
  • A TP/WVP-3000A, ground-based microwave radiometer, that was first introduced to South Korea has been operated since August 22, 2007 at the National Center for Intensive Observation of Severe Weathers (NCIO). Using the dual-band, the radiometer provides temperature and humidity soundings from the surface up to 10 km height with the high-temporal resolution of a few minutes. In this study, the performance of the radiometer on the predictability of the high impact weathers was evaluated and various practical applications were investigated. To verify the retrieved profile data from the radiometer, temperature and relative humidity soundings are compared with those from the rawinsonde launched at the NCIO and Gwangju station. The root mean squared errors for temperature and relative humidity soundings were smaller under rainy weather conditions. The correlation coefficient between PWVs (Precipitable Water Vapors) obtained from the radiometer and Global Positioning System satellite at Mokpo station is 0.92 on average. In order to investigate the structure and characteristics of precipitation, stability indexes related to rainfall such as the Convective Available Potential Energy (CAPE), K-index, and Storm RElative Helicity (SREH) were calculated using windprofiler at the NCIO from 14 to 16 September, 2007. CAPE and K-index tended to be large when the thermodynamic unstability was strong. On the other hand, SREH index was dominantly large when the dynamic unstability was strong due to the passage of the typhoon 'Nari'.

A Study on Design and Implementation of Speech Recognition System Using ART2 Algorithm

  • Kim, Joeng Hoon;Kim, Dong Han;Jang, Won Il;Lee, Sang Bae
    • International Journal of Fuzzy Logic and Intelligent Systems
    • /
    • 제4권2호
    • /
    • pp.149-154
    • /
    • 2004
  • In this research, we selected the speech recognition to implement the electric wheelchair system as a method to control it by only using the speech and used DTW (Dynamic Time Warping), which is speaker-dependent and has a relatively high recognition rate among the speech recognitions. However, it has to have small memory and fast process speed performance under consideration of real-time. Thus, we introduced VQ (Vector Quantization) which is widely used as a compression algorithm of speaker-independent recognition, to secure fast recognition and small memory. However, we found that the recognition rate decreased after using VQ. To improve the recognition rate, we applied ART2 (Adaptive Reason Theory 2) algorithm as a post-process algorithm to obtain about 5% recognition rate improvement. To utilize ART2, we have to apply an error range. In case that the subtraction of the first distance from the second distance for each distance obtained to apply DTW is 20 or more, the error range is applied. Likewise, ART2 was applied and we could obtain fast process and high recognition rate. Moreover, since this system is a moving object, the system should be implemented as an embedded one. Thus, we selected TMS320C32 chip, which can process significantly many calculations relatively fast, to implement the embedded system. Considering that the memory is speech, we used 128kbyte-RAM and 64kbyte ROM to save large amount of data. In case of speech input, we used 16-bit stereo audio codec, securing relatively accurate data through high resolution capacity.

Land Use Feature Extraction and Sprawl Development Prediction from Quickbird Satellite Imagery Using Dempster-Shafer and Land Transformation Model

  • Saharkhiz, Maryam Adel;Pradhan, Biswajeet;Rizeei, Hossein Mojaddadi;Jung, Hyung-Sup
    • 대한원격탐사학회지
    • /
    • 제36권1호
    • /
    • pp.15-27
    • /
    • 2020
  • Accurate knowledge of land use/land cover (LULC) features and their relative changes over upon the time are essential for sustainable urban management. Urban sprawl growth has been always also a worldwide concern that needs to carefully monitor particularly in a developing country where unplanned building constriction has been expanding at a high rate. Recently, remotely sensed imageries with a very high spatial/spectral resolution and state of the art machine learning approaches sent the urban classification and growth monitoring to a higher level. In this research, we classified the Quickbird satellite imagery by object-based image analysis of Dempster-Shafer (OBIA-DS) for the years of 2002 and 2015 at Karbala-Iraq. The real LULC changes including, residential sprawl expansion, amongst these years, were identified via change detection procedure. In accordance with extracted features of LULC and detected trend of urban pattern, the future LULC dynamic was simulated by using land transformation model (LTM) in geospatial information system (GIS) platform. Both classification and prediction stages were successfully validated using ground control points (GCPs) through accuracy assessment metric of Kappa coefficient that indicated 0.87 and 0.91 for 2002 and 2015 classification as well as 0.79 for prediction part. Detail results revealed a substantial growth in building over fifteen years that mostly replaced by agriculture and orchard field. The prediction scenario of LULC sprawl development for 2030 revealed a substantial decline in green and agriculture land as well as an extensive increment in build-up area especially at the countryside of the city without following the residential pattern standard. The proposed method helps urban decision-makers to identify the detail temporal-spatial growth pattern of highly populated cities like Karbala. Additionally, the results of this study can be considered as a probable future map in order to design enough future social services and amenities for the local inhabitants.

도로인접성에 따른 육상 풍력자원 잠재량 평가 (Evaluation of Onshore Wind Resource Potential According to the Road Proximity)

  • 김현구;황효정;강용혁;윤창열
    • 신재생에너지
    • /
    • 제9권4호
    • /
    • pp.13-18
    • /
    • 2013
  • Wind turbines should generally be installed at a certain distance from a road to ensure passengers' safety. In Korea, there is no clear guidance as the Ministry of Environment first proposed a road setback distance of 400 m in the Onshore Wind Farm Siting Guidelines draft proposed in July 2012, and then modified it to 1.5 times the height of the wind turbine in October of the same year. This study analyzed the dynamic range of onshore wind resource potential according to how the road setback distance is set using the Korea Wind Atlas with 100m spatial resolution made by the Korea Institute of Energy Research, the transportation network of the Ministry of Construction and Transportation, and the forest road network of the Korea Forestry Service. Owing to the geographical characteristics of Korea, where mountainous terrain accounts for 70% of the total territory, the wind resource potential within 1 km from forest roads are estimated to be 14.3 GW, 14% of Korea's total wind resource potential. In addition, the construction distance of new road for transporting wind turbines from the existing road to a wind farm site is estimated as less than 2 km. Given the limited wind resource potential and geographical constraints, an assessment system that can maximize wind resource utilization and ensure road safety at the same time, and which takes into account the regional characteristics instead of applying the fixed road setback distance across-the-road, is required.

Open Source GIS를 이용한 고해상도 영상의 Tile Map Service 시스템 구축에 관한 연구 (A Study on Tile Map Service of High Spatial Resolution Image Using Open Source GIS)

  • 정명훈;서용철
    • 대한공간정보학회지
    • /
    • 제17권1호
    • /
    • pp.167-174
    • /
    • 2009
  • Tile Map Service는 정적인 이미지들을 모아둔 저장소를 이용하여 매우 빠르게 지도 서비스를 수행하는 서비스이다. 지도 이미지 저장소는 특정 축척별로 지도 영역을 Tile 이미지로 저장한 디렉토리 구조이다. 따라서 디렉토리 구조로부터 이미지를 불러오는 것은 사용자의 요구에 따라서 지도를 데이터베이스로부터 직접 생성하는 것보다 훨씬 시간 단축이 이루어진다. 이와 같은 Tile Map Service를 이용하면 사용자가 복잡한 지도를 생성할 때 획기적으로 지도 생성 시간을 단축시키는 효과와 성능 향상을 위한 제반 노력을 제거할 수 있다. 본 논문은 Open Source GIS를 사용하여 고해상도 영상의 Tile Map Service 시스템을 구축하는 방안을 제시하는 것이다. Open Source GIS중 GDAL(Geospatial Data Abstraction Library)을 사용하여 Tile Map Image를 생성하였으며, OpenLayers를 이용하여 웹브라우저를 통한 서비스를 구축하였다. 또한 Tile Map Service 시스템을 구축 한 후 전통적인 방식으로 지도 렌더링을 수행하는 시스템과 성능테스트를 수행하여 결과를 비교 분석하였다. 수행 결과 본 연구를 통하여 제안된 방법으로 고해상도의 영상 데이터를 상용소프트웨어의 도입 없이 고가용성의 Tile Map Service 시스템을 구축할 수 있었다.

  • PDF

단순화된 S-R 래치를 이용한 6비트 CMOS 플래쉬 A/D 변환기 설계 (Design of 6bit CMOS A/D Converter with Simplified S-R latch)

  • 손영준;김원;윤광섭
    • 한국통신학회논문지
    • /
    • 제33권11C호
    • /
    • pp.963-969
    • /
    • 2008
  • 본 논문에서는 무선통신시스템의 수신단에 적용될 수 있는 6비트 100MHz 플래쉬 A/D 변환기를 설계하였다. 제안하는 플래쉬 A/D 변환기는 해상도가 1비트씩 증가함에 따라 2배수로 증가하는 S-R 래치 회로를 단순화하여 집적화 하였다. 기존 NAND 기반의 S-R 래치 회로에 사용되던 8개의 MOS 트랜지스터 숫자를 6개로 줄였으며, 비교단의 동적 소비전력을 최대 12.5%까지 감소되도록 설계하였다. 설계된 A/D 변환기는 $0.18{\mu}m$ CMOS n-well 1-poly 6-metal 공정을 사용하여 제작되었고, 전원 전압 1.8V, 샘플링 주파수 100MHz에서의 전력소모는 282mW이다. 입력 주파수 1.6MHz, 30MHz에서의 SFDR은 각각 35.027dBc, 31.253dBc이며, 4.8비트, 4.2비트의 ENOB를 나타내었다.

액정셀의 광학적 동특성 분석을 위한 실시간 측광식 편광계측기 : 제작과 성능시험

  • 양병관;노봉규;박찬;김진승;김재기
    • 한국광학회지
    • /
    • 제8권6호
    • /
    • pp.486-491
    • /
    • 1997
  • 액정표시소자(LCD:Liquid Crystal Display Device)의 핵심부분인 액정셀의 광학적 동특성을 잴 수 있는 진폭분할방식의 측광식 편광계측기를 만들었다. 이 장치는 편광상태를 결정할 빛살을 비편광빛살분할기를 써서 밝기가 거의 같은 세 줄기의 빛살로 나누고, 나누어진 각각의 빛살을 편광빛살분할기 또는 사반파장판과 편광빛살분할기를 써서 직교하는 두 편광성분으로 나눈 다음, 각 성분의 밝기를 6개의 광다이오드를 써서 잰다. 이렇게 얻은 6개의 광신호의 비를 바탕으로 들어오는 빛살의 편광상태를 결정한다. 이 장치의 시간분해능은 80.mu.s, 정확도는 뽀앙카레 공(Poincare sphere)표현에서 나타낼 때 .+-.0.3.deg.이다. LCD에 쓰이는 전형적인 네마틱 액정의 반응시간은 수십 ms이므로 이 장치를 쓰면 액정셀의 광학적 동특성을 분석할 수 있다.

  • PDF