• 제목/요약/키워드: Dynamic resolution

검색결과 550건 처리시간 0.032초

시공간적 연속성을 이용한 오염된 식생지수(GIMMS NDVI) 화소의 탐지 및 보정 기법 개발 (Detection and Correction of Noisy Pixels Embedded in NDVI Time Series Based on the Spatio-temporal Continuity)

  • 박주희;조아라;강전호;서명석
    • 대기
    • /
    • 제21권4호
    • /
    • pp.337-347
    • /
    • 2011
  • In this paper, we developed a detection and correction method of noisy pixels embedded in the time series of normalized difference vegetation index (NDVI) data based on the spatio-temporal continuity of vegetation conditions. For the application of the method, 25-year (1982-2006) GIMMS (Global Inventory Modeling and Mapping Study) NDVI dataset over the Korean peninsula were used. The spatial resolution and temporal frequency of this dataset are $8{\times}8km^2$ and 15-day, respectively. Also the land cover map over East Asia is used. The noisy pixels are detected by the temporal continuity check with the reference values and dynamic threshold values according to season and location. In general, the number of noisy pixels are especially larger during summer than other seasons. And the detected noisy pixels are corrected by the iterative method until the noisy pixels are completely corrected. At first, the noisy pixels are replaced by the arithmetic weighted mean of two adjacent NDVIs when the two NDVI are normal. After that the remnant noisy pixels are corrected by the weighted average of NDVI of the same land cover according to the distance. After correction, the NDVI values and their variances are increased and decreased by 5% and 50%, respectively. Comparing to the other correction method, this correction method shows a better result especially when the noisy pixels are occurred more than 2 times consistently and the temporal change rates of NDVI are very high. It means that the correction method developed in this study is superior in the reconstruction of maximum NDVI and NDVI at the starting and falling season.

Using frequency response function and wave propagation for locating damage in plates

  • Quek, Ser-Tong;Tua, Puat-Siong
    • Smart Structures and Systems
    • /
    • 제4권3호
    • /
    • pp.343-365
    • /
    • 2008
  • In this study, the frequency domain method which utilizes the evaluation of changes in the structural mode shape is adopted to identify regions which contain localized damages. Frequency response function (FRF) values corresponding to the modal frequency, analogous to the mode shape coefficients, are used since change in natural frequency of the system is usually insignificant for localized damage. This method requires only few sensors to obtain the dynamic response of the structure at specific locations to determine the FRF via fast-Fourier transform (FFT). Numerical examples of an aluminum plate, which includes damages of varying severity, locations and combinations of multiple locations, are presented to demonstrate the feasibility of the method. An experimental verification of the method is also done using an aluminum plate with two different degrees of damage, namely a half-through notch and a through notch. The inconsistency in attaining the FRF values for practical applications due to varying impact load may be overcome via statistical averaging, although large variations in the loading in terms of the contact duration should still be avoided. Nonetheless, this method needs special attention when the damages induce notable changes in the modal frequency, such as when the damages are of high severity or cover more extensive area or near the boundary where the support condition is modified. This is largely due to the significant decrease in the frequency term compared to the increase in the vibration amplitude. For practical reasons such as the use of limited number of sensors and to facilitate automation, extending the resolution of this method of identification may not be efficient. Hence, methods based on wave propagation can be employed as a complement on the isolated region to provide an accurate localization as well as to trace the geometry of the damage.

영화 대사의 정량적 분석을 통한 등장인물의 감정과 서사간의 상관성 연구 (Analysis of the Correlation between Narrative and Emotions Displayed by Movie Characters through a Quantitative Analysis of Dialogues in a Movie)

  • 유은순
    • 한국콘텐츠학회논문지
    • /
    • 제13권6호
    • /
    • pp.95-107
    • /
    • 2013
  • 영화의 언어적 요소인 대사(dialogue)는 영화의 서사 전개에서 중요한 역할을 한다. 하지만 스토리를 이미지로 표현하는 영화의 매체적 특성상 영화 분석의 초점은 주로 영상에 맞추어져 있었고, 대사는 평가절하되거나 그 중요성에 비해 연구가 미흡한 것이 사실이다. 본 연구는 그동안 영화 연구에서 부차적이고 주변적인 위치에 머물러 있던 대사가 서사의 진행에서 어떤 기능을 하는지 살펴보고, 대사가 영화에서 갖는 의미를 조명한다. 이를 위해 영화 속 등장인물들의 발화를 통해 표출된 감정 표현(emotion expressions)들을 대사로부터 수작업으로 선별하여 긍정과 부정으로 극성 분류를 한 후, 감정 표현들의 비율이 어떻게 서사와 연관성을 갖는지를 정량적으로 분석하였다.

상황 인식 응용을 위한 OSGi 기반 서비스 미들웨어 (OSGi based Service Middleware for Context-Aware Applications)

  • 정헌만;이정현
    • 정보처리학회논문지C
    • /
    • 제13C권6호
    • /
    • pp.691-700
    • /
    • 2006
  • 유비쿼터스 컴퓨팅 환경에서 상황 인식 기반의 서비스를 제공하기 위해선 동적인 상황 관리 기술과 상황 추론 기술, 그리고 상황 모델링 기술이 필요하다. 기존 연구에서 상황 인식 서비스는 상황 인식 미들웨어에서 사용하는 상황 온톨로지를 이용해서 설계되기 때문에 서비스의 실행도중 상황 온톨로지를 동적으로 변경하기 어렵다. 본 논문에서는 유비쿼터스 컴퓨팅 환경에서 상황 변화에 대한 사용자의 요구사항을 능동적으로 반영하고, 동적인 응용 적응성을 지원하는 계층적 온톨로지 기반 상황 관리 모델을 제안하고 이를 기반으로 상황 인식 미들웨어를 설계한다 또한, 상황 인식 서비스 구현을 위해 다양한 컨텍스트 발견, 획득, 해석, 추론을 효과적으로 지원하며 사용자의 서비스 실행 시 발생할 수 있는 상황 충돌을 해결하기 위한 방법을 제시한다. 설계하는 미들웨어는 OSGi 프레임워크 위에서 구현함으로써 다양한 유비쿼터스 환경에 필요한 상황 인식 서비스의 개발 및 운용을 효과적으로 지원을 할 수 있다.

스위치-매트릭스 구조의 고해상도 델타-시그마 D/A변환기용 준 디지털 FIR 재생필터 (A switch-matrix semidigital FIR reconstruction filter for a high-resolution delta-sigma D/A converter)

  • 송윤섭;김수원
    • 대한전자공학회논문지SD
    • /
    • 제42권7호
    • /
    • pp.21-26
    • /
    • 2005
  • 본 논문에서는 작은 면적을 갖는 저전력 스위치-매트릭스 구조의 델타-시그마 D/A 변환기용 준 디지털 FIR 재생필터를 제안하였다. 제안된 재생필터는 계수를 7 비트로 양자화하고 각 비트 값에 대응하는 전류를 생성하는 7 개의 전류원을 사용하는 구조로 205 개의 탭을 가지며 1419 개의 스위칭 트랜지스터로 구현되었다. 제안된 필터는 0.25 um CMOS공정을 이용하여 설계되었으며 전체 칩 면적은 1.5 mm$^{2}$으로 2.5 V에서 3.8 mW의 소비 전력을 갖는다. 모의실험 결과 104 dB의 다이나믹 레인지와 -84 dB의 대역 밖의 노이즈 허용값을 나타내어 고해상도 오디오용 DAC에 적합하다.

A 4×32-Channel Neural Recording System for Deep Brain Stimulation Systems

  • Kim, Susie;Na, Seung-In;Yang, Youngtae;Kim, Hyunjong;Kim, Taehoon;Cho, Jun Soo;Kim, Jinhyung;Chang, Jin Woo;Kim, Suhwan
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제17권1호
    • /
    • pp.129-140
    • /
    • 2017
  • In this paper, a $4{\times}32$-channel neural recording system capable of acquiring neural signals is introduced. Four 32-channel neural recording ICs, complex programmable logic devices (CPLDs), a micro controller unit (MCU) with USB interface, and a PC are used. Each neural recording IC, implemented in $0.18{\mu}m$ CMOS technology, includes 32 channels of analog front-ends (AFEs), a 32-to-1 analog multiplexer, and an analog-to-digital converter (ADC). The mid-band gain of the AFE is adjustable in four steps, and have a tunable bandwidth. The AFE has a mid-band gain of 54.5 dB to 65.7 dB and a bandwidth of 35.3 Hz to 5.8 kHz. The high-pass cutoff frequency of the AFE varies from 18.6 Hz to 154.7 Hz. The input-referred noise (IRN) of the AFE is $10.2{\mu}V_{rms}$. A high-resolution, low-power ADC with a high conversion speed achieves a signal-to-noise and distortion ratio (SNDR) of 50.63 dB and a spurious-free dynamic range (SFDR) of 63.88 dB, at a sampling-rate of 2.5 MS/s. The effectiveness of our neural recording system is validated in in-vivo recording of the primary somatosensory cortex of a rat.

동작 및 효정 동시 포착을 위한 데이터 기반 표정 복원에 관한 연구 (Data-driven Facial Expression Reconstruction for Simultaneous Motion Capture of Body and Face)

  • 박상일
    • 한국컴퓨터그래픽스학회논문지
    • /
    • 제18권3호
    • /
    • pp.9-16
    • /
    • 2012
  • 본 논문은 광학식 동작 포착 장비를 사용해 얼굴과 동작을 동시에 포착할 경우 발생하는 불완전한 표정 데이터의 복원에 관한 연구를 다룬다. 일반적으로 동작 포착과 표정 포착은 필요 해상도에서 차이가 나며, 이로 인해 동작과 표정을 동시에 포착하기 힘들었다. 본 연구에서는 표정과 동작의 동시 포착을 위해, 기존의 작은 마커를 촘촘히 얼굴에 부착하는 표정 포착 방식에서 탈피하여 적은 수의 마커만을 이용하여 표정을 포착하고, 이로부터 세밀한 얼굴 표정을 복원하는 방법을 제안한다. 본 방법의 핵심 아이디어는 얼굴 표정의 움직임을 미리 데이터베이스화하여, 적은 수의 마커로 표현된 얼굴 표정을 복원하는 것이다. 이를 위해 주성분분석을 사용하였으며, 제안된 기술을 실제 동적인 장면에 활용하여 표정의 복원이 잘 됨을 검증하였다.

수중 센서 네트워크를 위한 가변 슬롯시간 기반의 MAC프로토콜 (MAC Protocol using Dynamic Slot-Time for Underwater Acoustic Sensor Network)

  • 이동원;김선명;양연모
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2011년도 춘계학술대회
    • /
    • pp.344-347
    • /
    • 2011
  • 전파를 이용하는 지상에서의 무선 센서 네트워크와 달리 수중에서는 음파를 이용하여 통신을 한다. 음파를 이용한 수중 센서 네트워크에서 긴 전파지연과 제한된 대역폭을 위한 많은 연구가 진행되고 있다. 수중 센서 네트워크에서 긴 전파 지연으로 노드가 전송한 패킷(Packet)은 빈번히 충돌한다. 이러한 문제를 해결하기 위해 무선 네트워크에서 이용되는 백오프(Back-off) 기법이 일반적으로 이용된다. 그러나 노드의 배치에 따라 고정된 슬롯시간(Slot-time)은 불필요한 지연시간을 발생시켜 네트워크의 성능을 저하 시킨다. 본 논문에서는 슬롯시간의 동적인 설정 기법을 제안하고 기존에 연구된 MAC 프로토콜에 적용하였다. 마지막으로 기존의 MAC 프로토콜과 제안된 기법을 적용한 MAC 프로토콜의 성능을 비교하고, 그 결과 기존 MAC 프로토콜에 비하여 우수한 성능을 보임을 확인 하였다.

  • PDF

Multi-Channel Data Acquisition System Design for Spiral CT Application

  • Yoo, Sun-Won;Kim, In-Su;Kim, Bong-Su;Yun Yi;Kwak, Sung-Woo;Cho, Kyu-Sung;Park, Jung-Byung
    • 한국의학물리학회:학술대회논문집
    • /
    • 한국의학물리학회 2002년도 Proceedings
    • /
    • pp.468-470
    • /
    • 2002
  • We have designed X-ray detection system and multi-channel data acquisition system for Spiral CT application. X-ray detection system consists of scintillator and photodiode. Scintillator converts X-ray into visible light. Photodiode converts visible light into electrical signal. The multi-channel data acquisition system consists of analog, digital, master and backplane board. Analog board detects electrical signal and amplifies signal by 140dB. Digital board consists of MUX(Multiplex) which routes multi-channel analog signal to preamplifier, and ADC(Analog to Digital Converter) which converts analog signal into digital signal. Master board supplies the synchronized clock and transmits the digital data to image reconstructor. Backplane provides electrical power, analog output and clock signal. The system converts the projected X-ray signal over the detector array with large gain, samples the data in each channel sequentially, and the sampled data are transmitted to host computer in a given time frame. To meet the timing limitation, this system is very flexible since it is implemented by FPGA(Field Programmable Gate Array). This system must have a high-speed operation with low noise and high SNR(signal to noise ratio), wide dynamic range to get a high resolution image.

  • PDF

Proteomic Approach of the Protein Profiles during Seed Maturation in Common Buckwheat (Fagopyrum esculentum Moench.)

  • Park, Min-Hwa;Shin, Dong-Hoon;Han, Myoung-Hae;Yun, Young-Ho;Bae, Jeong-Sook;Lee, Yun-Sang;Chung, Keun-Yook;Lee, Moon-Soon;Woo, Sun-Hee
    • 한국자원식물학회지
    • /
    • 제22권3호
    • /
    • pp.227-235
    • /
    • 2009
  • Single seeds of common buckwheat cultivar Suwon No. 1 when subjected to SDS-PAGE revealed very high polymorphism. High variation existed for protein or protein subunits with molecular weight 54-47kDa, 45-25kDa and 16-11kDa. The electrophoregram showed variation for globulin as well as other protein fractions. About 300 proteins were separated by two-dimensional electrophoresis in common buckwheat (Fagopyrum esculentum Moench.) seed. Seed maturation is a dynamic and temporally regulated phase of seed development that determines the composition of storage proteins reserves in mature seeds. Buckwheat seeds from 5, 10, 15, 20, and 25 days after pollination and matured stage were used for the analysis. This led to the establishment of high-resolution proteome reference maps, expression profiles of 48 spots. It was identified 48 proteins from MALDI-TOF/MS analysis of wild buckwheat seed storage proteins. The 48 proteins were found identical or similar to those of proteins reported in buckwheat and other plants; it is belonging to 9 major functional categories including seed storage proteins, stress/defense response, protein synthesis, photosynthesis, allergy proteins, amino acid, enzyme, metabolism, and miscellaneous. It appears that the major allergenic storage protein separated played the important role in buckwheat breeding and biochemical characterization.