• Journal of Biomedical Engineering Research
• /
• v.21 no.2
• /
• pp.213-218
• /
• 2000

Pressure distributions of the soft tissue are valuable for understanding and diagnosing the disease characteristics due to the mechanical loading. Our system measures dynamic pressure distributions in real-time under the general PC environment, and analyzes various foot disorders. Main features of the developed system are as follows: (1) With the resistive pressure sensor matrix of 40${\times}$40 cells, the data is sent to the PC with the maximum sampling rate of 40 frames/sec. (2) For each frame, contact area, pressure and force are analyzed by graphic forms. Thus, various biomechanical parameters are easily determined at specific areas of interests. (3) A certain stance phase can be chosen for the analysis from the continuous walking, and the detailed biomechanical analysis can be done according to an arbitrary line dividing anterior/posterior or medial/lateral plantar areas. (4) The center of pressure (COP) is calculated and traced from the pressure distribution data, and thus the movement of the COP is monitored in detail. A few experiments revealed that our system successfully measured the dynamic plantar distribution during normal walking.

• The Journal of Korean Physical Therapy
• /
• v.21 no.4
• /
• pp.43-49
• /
• 2009

Purpose: This study examined the dynamic peak plantar pressure under the foot areas in those with a functional leg length inequality. Methods: The dynamic peak plantar pressure under the foot areas in an experimental group with a functional leg length inequality (n=20) and a control group (n=20) was assessed a using the Mat-Scan system (Tekscan, USA). The peak plantar pressure under the hallux, 1st, 2nd, 3-4th and 5th metatarsal head (MTH), mid foot, and heel was measured while the subject was walking on the Mat-Scan system. Results: The experimental group had significantly higher peak plantar pressure under all foot areas when the dynamic peak plantar pressure in the short leg and long leg sides was compared. The control group had a significantly higher peak plantar pressure under the 1st, 2nd, 3-4th, and 5th MTH when the dynamic peak plantar pressure in the short leg and long leg sides were compared. The experimental group showed a significantly larger difference in the dynamic peak plantar pressure under the hallux, 1st, 2nd, 3-4th and 5th MTH, mid foot and heel than the control group. Conclusion: A functional leg length inequality leads to an increase in the weight distribution and dynamic peak plantar pressure in the side of the short leg.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.150-157
• /
• 2019

The purpose of this study was investigate the effect of gastrocnemius(GCM) muscle length on the dynamic balance and antero-posterior pressure distribution of foot. Thirty subjects were recruited and each subject was classified with control experimental and control group according to GCM muscle length. The experimental group included subjects with shortness of GCM muscle length, the control group included subjects with normal length of GCM. The dynamic balance and antero-posterior pressure distribution of foot were measured by Biorescue equipment. To evaluate dynamic balance, we collected data of limit of stability in antero-posterior direction. We analyzed the data by using independent t-test. The alpha level was set 0.05. The results showed that the dynamic balance and antero-posterior pressure distribution of foot were significantly different between two groups (p<0.05). This study suggests that the shortness of GCM affects anterior limited of stability in dynamic balance and anterior pressure distribution of foot. Therefore, it is important to maintain optimal GCM muscle length for normal balance ability and prevention of musculoskeletal disease.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.27 no.5
• /
• pp.193-202
• /
• 2023

In this paper, a dynamic centrifuge model test was conducted on a 24.8-meter-deep excavation consisting of a 20 m sand layer and 4.8 m bedrock, classified as S3 by Korean seismic design code KDS 17 10 00. A braced excavation wall supports the hole. From the results, the mechanism of seismically induced earth pressure was investigated, and their distribution and loading points were analyzed. During earthquake loadings, active seismic earth pressure decreases from the at-rest earth pressure since the backfill laterally expands at the movement of the wall toward the active direction. Yet, the passive seismic earth pressure increases from the at-rest earth pressure since the backfill pushes to the wall and laterally compresses at it, moving toward a passive direction and returning to the initial position. The seismic earth pressure distribution shows a half-diamond distribution in the dense sand and a uniform distribution in loose sand. The loading point of dynamic thrust corresponding with seismic earth pressure is at the center of the soil backfill. The dynamic thrust increased differently depending on the backfill's relative density and input motion type. Still, in general, the dynamic thrust increased rapidly when the maximum horizontal displacement of the wall exceeded 0.05 H%.

• Communications of the Korean Mathematical Society
• /
• v.16 no.1
• /
• pp.137-152
• /
• 2001

Steady two-dimensional flows due to an applied pressure distribution in water of finite depth are considered. Gravity is included in the dynamic boundary condition. Gravity is included in the dynamic boundary condition. The problem is solved numerically by using the boundary integral equation technique. It is shown that, for both supercritical and subcritical flows, solutions depend on three parameters: (i) the Froude number, (ii) the magnitude of applied pressure distribution, and (iii) the span length of pressure distribution. For supercritical flows, there exist up to two solutions corresponding to the same value of Froude number for positive pressures and a unique solution for negative pressures. For subcritical flows, there are solutions with waves behind the applied pressure distribution. As the Froude number decreases, these waves when the Froude numbers approach the critical values.

• Journal of the Ergonomics Society of Korea
• /
• v.22 no.3
• /
• pp.57-73
• /
• 2003

Although body pressure distribution is sensitive to movements and is relatively simple to measure even in small space, there are few researches involving applications to driver's posture and its change. The main objective in this study is the application of body pressure distribution measurements for the prediction of the driver's posture and its change. This requires quantitative analyses of the dynamic body pressure distribution, which is the change of body pressure distribution with time. The experiment involved 16 male subjects who drove for 45 minutes in a seating buck. Measurement time, stature group, and lumbar support prominence were selected as independent variables, with subjective ratings of driver's discomfort, body posture data of hip, torso. knee angle, and body pressure data variables as dependent variables. The body pressure change variables and subjective ratings were found to increase as the measurement time increased and body pressure ratio variables reflected the torso angle. From the results and analysis of the body posture data and subjective rating results, it was predicted that the seats and the design of the lumbar supports used in the experiment was not fit for tall subjects, which could also be confirmed through the body pressure distribution data.

• Journal of Biomedical Engineering Research
• /
• v.18 no.4
• /
• pp.439-446
• /
• 1997

We undertook this study to determine the plantar pressure distribution characteristics of hallux valgus, major increasing foot disease. Twenty three valgus Patients were evaluated with clinical examinations, radiologic studies and dynamic plantar pressure distribution measurements. The present study also suggested a masking method for detailed analyses on plantar pressure distribution measurements. With higher grade of hallux valgus, pressure, contact area, and impulse on metartasus are significantly increased Pressure concentration is very important in foot diseases and an approximate plantar pressure distribution should be considered on any shoe design.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.2
• /
• pp.153-168
• /
• 2016

Sloshing phenomenon is a complicated free surface flow problem that increases the dynamic pressure on the sidewalls and the bottom of the storage tanks. When the storage tanks are partially filled, it is essential to be able to evaluate the fluid dynamic loads on the tank's perimeter. In this paper, a numerical code was developed to determine the pressure distribution on the rectangular and trapezoidal storage tanks' perimeters due to liquid sloshing phenomenon. Assuming the fluid to be inviscid, the Laplace equation and the nonlinear free surface boundary conditions were solved using coupled boundary element - finite element method. The code performance for sloshing modeling was validated using Nakayama and Washizu's results. Finally, this code was used for partially filled rectangular and trapezoidal storage tanks and free surface displacement, pressure distribution and horizontal and vertical forces exerted on the tanks' perimeters due to liquid sloshing phenomenon were estimated and discussed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.244-249
• /
• 1997

Internal and external heat sources will cause to deform to machine elements in the contact joint of structure,which results in the change of contact pressure distribution different from initial assembly. Heat induced variations of contact pressure will change the static and dynamic properties such as contact stiffness,damping as well as contact heat conduction in the structure. In order to design and control the intelligent machine tool operating in variant conditions more sophisticatedly, the good prediction for the changes of prescribed propeties are strongly required especially in the contact elements adjacent to the rotational or linear bearing This paper presents some computational and experimental results in regard to static and dynamic characteristics of the press-fitted bush and shaft assembly which is a model of the bearing innerrace and shaft assembly. In the condition of heat generation on the outer surface of the bush,the effects of changes in the negative clearance and the heat flux on pressure distribution and dynamic properties are investigated. Results of this study show that the edge effect of the bush and the initial clearance have effects on the transient dynamic characteristics significantiy.

• The Journal of Korean Physical Therapy
• /
• v.22 no.1
• /
• pp.47-51
• /
• 2010

Purpose: The purpose of this study was to determine whether there are any differences, with and without a toe spreader (TS), in dynamic foot pressure distribution in children with spastic diplegic cerebral palsy. Methods: Dynamic foot pressure recording using the RSscan system were obtained during walking in 12 participants (male=7, female=5) with and without TS. Mean force was measured for four different plantar regions; great toe, forefoot, midfoot, hindfoot. Displacement of center of pressure (COP), velocity of COP displacement and stance time were also measured during gait. Results: TS walking exhibited statistically significant decrease of mean force under great toe and forefoot (p<0.05), compared with a barefoot walking. Also, TS walking exhibited statistically significant increase of antero-posterior displacement of COP (p>0.05). Conclusion: These findings indicate the potential clinical utility of toe spreader to correct dynamic foot pressure during stance phase in children with spastic diplegic cerebral palsy.