• 한국항해항만학회지
• /
• 제32권5호
• /
• pp.369-377
• /
• 2008

최근 컨테이너선의 대형화 추세와 항만간의 경쟁 가속화로 인해 컨테이너터미널의 효율적 운영과 생산성 향상에 대한 관심과 노력이 증대되고 있다. 특히 YT를 이용한 이송방식을 채택하고 있는 터미널의 경우 AGV(Automated Guided Vehicle)를 이용하고 있는 자동화터미널에 비해 상대적으로 경제성 및 운용효율성 측면에서 불리한 것이 사실이다. 최근 10여 년간 이와 같은 YT운용의 비효율성을 보완하기 위해 YT Pooling Operation 도입과 같은 노력이 계속되어 왔으나 개별 YT의 위치인식기능부재로 인한 제약으로 실질적인 효과는 미미한 수준이었다. 본 연구에서는 최근 주목받고 있는 RTLS(Real Time Location System) 기술을 활용하여 기존 YT Pooling Operation의 제약사항을 해결하는 새로운 개념의 YT Dynamic Operation 모델을 세안한다.

• 한국안전학회지
• /
• 제11권2호
• /
• pp.52-59
• /
• 1996

This paper presents a new approach for assessing the dynamic reliability in a complex system such as a nuclear power plant. The method is applied to a dynamic analysis of the potential accident sequences which may occur during mid-loop operation. Mid-loop operation is defined as an operation to make RCS water level below the top of the flow area of the hot legs at the junction with the reactor vessel for repairs and maintenance of steam generators and reactor coolant pumps for a specific time. The Idea behind this approach consists of both the use of the concept of the performance achievement/requirement correlation and of a dynamic event tree generation method. The assessment of the system reliability depends on the determination of both the required performance distribution and the achieved performance distribution. The quantified correlation between requirement and achievement represents a comparison between two competing variables. It is demonstrated that this method is easily applicable and flexible in that it can be applied to any kind of dynamic reliability problem.

• 한국산업융합학회 논문집
• /
• 제24권5호
• /
• pp.625-633
• /
• 2021

This paper considers the development of safety operation guideline for onboard A-Frame system used to operate heavy-work ROV using dynamic simulation. Onboard A-Frame is affected by ship's behavior and large inertia by the marine environment. For this reason, safety operation guidelines are required for the safety of workers who operate ship-mounted equipment. In order to develop a guideline, it is necessary to evaluate the safety loads through real sea experiment. However, simulation method is used instead since it is difficult to conduct experiments in sea. Therefore, a procedure for safety operation analysis based on dynamic simulation that can consider ship behavior and marine environment and a safety operation table were proposed in this study. And the construction of safety operation table and guide for safety operation using the applied load and safety factor analysis results were considered.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.329-334
• /
• 2002

Preliminary test for the design and construction of a tuned dynamic absorber is a conducted. Proposed tuned dynamic absorber is a cantilevered beam type, and is supposed to adjust its natural frequency according to the changing operation condition of the primary system. The modal mass of the dynamic absorber is the easiest to control, therefore, the position of the attached mass of the dynamic absorber is considered as the main design parameter of the absorber. The effect of the dynamic absorber is experimentally verified under various operation conditions of the primary system.

• 조명전기설비학회논문지
• /
• 제16권4호
• /
• pp.15-21
• /
• 2002

본 논문에서는 동적 전류분담 인덕터를 이용한 ZVT 풀 브리지 DC/DC 컨버터의 병렬운전 특성을 해석하였다. 기존의 경우 CT(Current Transformer)를 사용하여 각 단위 컨버터 전류의 크기를 감지하여, 제어회로에서 각 컨버터에 균등한 전류 배분을 하는 방법을 사용하였으나, 본 연구에서는 동적 전류분담 인덕터를 사용함으로써 병렬운전하는 두 대의 풀 브리지 컨버터의 전류분배를 위한 제어회로를 비교적 단순하게 하였다. 동시에 ZVT회로를 이용하여 컨버터의 효율을 향상시켰으며 스위칭소자로서 IGBT를 사용하여 2[㎾]급 시작품을 제작, 50[KHz]에서 실험하였다.

• 대한교통학회지
• /
• 제30권1호
• /
• pp.59-72
• /
• 2012

교통소통을 개선하기 위해 설치된 오르막차로의 운영효율은 교통상태에 따라 달라지는 것이 관측된다. 교통운영측면에서 교통량(v/c)이 증가하고 중차량 구성비가 증가할 경우, 오르막차로는 오히려 교통혼잡의 요인으로 작용하기도 한다. 이는 교통류 상태에 따라 오르막차로를 동적으로 운영하면 효과가 있다는 것을 시사하지만, 교통운영측면에서 이를 효과적으로 제어할 계량적인 기준은 없는 실정이다. 본 연구에서는 오르막구간에서의 동적차로운영기준의 필요성을 제시하고, 교통특성에 맞는 기준을 수립하여 이에 대한 효과를 분석하고자 하였다. 낙동분기점 마산방향의 오르막구간을 선정하여 교통량비(v/c), 중차량 구성비 등을 교통운영변수로 VISSIM 분석을 시행하였다. 시뮬레이션 결과, 오르막구간의 평균통행속도가 50km/h일 때 오르막차로의 개방과 폐쇄를 결정하는 운영기준(임계통행속도)으로 적절한 것으로 나타났다. 또한 오르막차로 동적운영에 따른 효과를 분석한 결과, 동적운영의 경우 일반적인 개방과 폐쇄보다 편익이 높은 것으로 나타났다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.136.2-136.2
• /
• 2011

A dynamic simulation study on SCR process in GTL process was carried out in order to find optimum operation conditions for pilot plant operation. Optimum operating conditions for SCR synthesis gas process were determined by changing operation variables such as feed temperature and pressure. It was also assumed that physical properties of reaction medium were governed by RKS (Redlich-Kwong-Soave) equation. The effect of temperature and pressure on synthesis gas process $H_2$/CO ratio were mainly examined. Dynamic simulation results were fed back to feed operation condition for optimizing productivity, especially for appropriate condition to FT (Fischer-Tropsch) synthesis unit.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.19-20
• /
• 2014

Boiler design should be desinged to maximize thermal efficiency of the system under imposed load requirement and a boiler should be validated for transient operation. If a proper prediction is possible on the transient behavior and transient characteristics of a boiler, one may asses the performance of boiler component, control logics and operation procedures. In this work, dynamic modeling method of boiler is presented and dynamic simulation of load runback scenario was carried out on suprecritical oil-firing boiler.

• Architectural research
• /
• 제19권3호
• /
• pp.71-77
• /
• 2017

Dynamic pricing refers to a system in which a tariff varies, according to a level of charging and applied time depending on time change. The power billing system used in the Korean Electric Power Corporation (KEPCO) is based on time of use (TOU) pricing, which is one of the dynamic pricing systems. This paper aimed to determine the operational results of a variable refrigerant flow system, to which a new control algorithm was applied, in order to respond to dynamic pricing, in summer and the utility of the new control. To do this, real measured data was acquired from a VRF system installed in a building for educational purposes, where dynamic pricing was applied for about 100 days during summer time. At the maximum load operation time period in TOU, the new control minimized operation within the indoor comfort range, an increase in refrigerant evaporation temperature in the indoor unit and the number of revolutions in a compressor in the outdoor unit was limited. As a result, power usage was decreased by 11%, and the operational cost by 14.6%. Furthermore, measurement results using the Predicted Mean Vote (PMV) model, that represented satisfaction of thermal environment, showed that 82.8% to 90.4% of the occupants of the building were satisfied during operation when the new control was applied.

• Nuclear Engineering and Technology
• /
• 제48권2호
• /
• pp.386-403
• /
• 2016

The safety of nuclear power plants is analyzed by a probabilistic risk assessment, and the fault tree analysis is the most widely used method for a risk assessment with the event tree analysis. One of the well-known disadvantages of the fault tree is that drawing a fault tree for a complex system is a very cumbersome task. Thus, several graphical modeling methods have been proposed for the convenient and intuitive modeling of complex systems. In this paper, the reliability graph with general gates (RGGG) method, one of the intuitive graphical modeling methods based on Bayesian networks, is improved for the reliability analyses of dynamic systems that have various operation modes with time. A reliability matrix is proposed and it is explained how to utilize the reliability matrix in the RGGG for various cases of operation mode changes. The proposed RGGG with a reliability matrix provides a convenient and intuitive modeling of various operation modes of complex systems, and can also be utilized with dynamic nodes that analyze the failure sequences of subcomponents. The combinatorial use of a reliability matrix with dynamic nodes is illustrated through an application to a shutdown cooling system in a nuclear power plant.