• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2020년도 학술발표회
• /
• pp.122-122
• /
• 2020

Urban flood simulation plays a vital role in national flood early warning, prevention and mitigation. In recent studies on 2-dimensional flood modeling, the integrated run-off inundation model is gaining grounds due to its ability to perform in greater computational efficiency. The adaptive quadtree shallow water numerical technique used in this model implements the adaptive mesh refinement (AMR) in this simulation, a procedure in which the grid resolution is refined automatically following the flood flow. The method discounts the necessity to create a whole domain mesh over a complex catchment area, which is one of the most time-consuming steps in flood simulation. This research applies the dynamic grid refinement method in simulating the recent extreme flood events in Metro Manila, Philippines. The rainfall events utilized were during Typhoon Ketsana 2009, and Southwest monsoon surges in 2012 and 2013. In order to much more visualize the urban flooding that incorporates the flow within buildings and high-elevation areas, Digital Surface Model (DSM) resolution of 5m was used in representing the ground elevation. Results were calibrated through the flood point validation data and compared to the present flood hazard maps used for policy making by the national government agency. The accuracy and efficiency of the method provides a strong front in making it commendable to use for early warning and flood inundation analysis for future similar flood events.

• 한국군사과학기술학회지
• /
• 제22권3호
• /
• pp.369-381
• /
• 2019

As tactical networks are gradually shifting toward IP-based flexible operation for diversified battlefield services, QoS(Quality-of-Service) coordination for service differentiation becomes essential to overcome the heterogeneous and scarce networking resources limitations. QoS coordination for tactical network traffic should be able to monitor and react the dynamic changes in underlying network topology and service priorities. In this paper, by adopting the emerging cloud-native service mesh concept into tactical network context, we study the feasibility of intelligent QoS coordination by employing tactical service mesh(TSM) as an additional layer to support enhanced traffic quality monitoring and control. The additional TSM layer can leverage distributed service-mesh proxies at tactical mesh WAN(Wide Area Network) nodes so that service-aware differentiated QoS coordination can be effectively designed and integrated with TSM-assisted traffic monitoring and control. Also, by validating the feasibility of TSM layer for QoS coordination with miniaturized experimental setup, we show the potential of the proposed approach with several approximated battlefield traffics over a simulated TSM-enabled tactical network.

• 해양환경안전학회지
• /
• 제23권7호
• /
• pp.791-800
• /
• 2017

선박 거주구역에 화재발생 시 화재시뮬레이션 도구를 이용하여 화재확산형상을 실시간으로 예측하고 상황에 따른 적절한 대응방안을 제시할 수 있다면 화재사고로 인한 인명피해를 최소화시킬 수 있을 것으로 예상된다. 그러나 오늘날 화재시뮬레이션은 해석대상공간의 크기와 그리드 개수에 따라 해석을 하는데 있어, 매우 장시간을 필요로 하는 현실적 한계가 있다. 이에 이 연구에서는 화재시뮬레이션 시간단축을 목적으로 선박 거주구역 화재시뮬레이션에 적용할 수 있는 격자크기와 생성방법에 대한 연구를 수행하였다. 연구결과 선박 거주구역에 적용되는 격자크기는 0.25[m] 이내의 값을 사용하는 것이 가장 효율적인 것으로 판단되었다. 또한 single mesh 격자생성방법으로 수행했을 경우와 비교하여, multi mesh 격자생성방법으로 시뮬레이션을 수행하였을 때 가시거리 값은 4.3 %, 온도 값은 8.3 % 이내에서 유사하고 해석시간은 약 80 % 감소하였기 때문에, multi mesh 방법으로 격자를 생성하는 것이 해석시간을 단축하는데 있어 매우 효과적임을 확인하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권2호
• /
• pp.175-185
• /
• 2017

This paper presents new differential methods for computing the combined and single dynamic stability derivatives of flight vehicle. Based on rigid dynamic mesh technique, the combined dynamic stability derivative can be achieved by imposing the aircraft pitching to the same angle of attack with two different pitching angular velocities and also translating it to the same additional angle of attack with two different rates of angle of attack. As a result, the acceleration derivative is identified. Moreover, the rotating reference frame is adopted to calculate the rotary derivatives when simulating the steady pull-up with different pitching angular velocities. Two configurations, the Hyper Ballistic Shape (HBS) and Finner missile model, are considered as evaluations and results of all the cases agree well with reference or experiment data. Compared to traditional ones, the new differential methods are of high efficiency and accuracy, and potential to be extended to the simulation of combined and single stability derivatives of directional and lateral.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.341-346
• /
• 2006

This paper provides the resuIts on the evaluation of dynamic characteristics of the optimized shells. Five fundamental technologies such as computer-aided geometric design, automatic mesh generation, shell finite element, design sensitivity analysis and shell optimization process, are used for shell optimization maximizing the fundamental natural frequency. A dome shell is adopted for the shell shape optimization and the dynamic characteristic of the optimized shell such as the variation of natural frequencies is then investigated. From the investigation, more constraint functions related to shell natural frequencies is necessarily required to effectively control dynamic characteristics of the optimized shells.

• Coupled systems mechanics
• /
• 제7권2호
• /
• pp.163-176
• /
• 2018

The ship hydrodynamics in static and dynamic states were investigated using 3-dimensional numerical simulations. The static case simulated a fixed ship, while the dynamic case considered a ship with free sinkage and trim using the mesh morphing technique. High speed was found to increase the wave elevation around the ship. Compared with the static case, the dynamic case seemed to generate higher waves near the bow and after the stern. The frictional resistance was found be to more dominant. However, the pressure resistance became gradually important with the increase of the ship speed. The trim and sinkage were also analyzed to characterize the ship hydrodynamics in the dynamic state.

• 한국산업융합학회 논문집
• /
• 제27권4_2호
• /
• pp.973-980
• /
• 2024

Dependence of dynamic fracture path on loading velocity was observed from experimental results based on the three point bending fracture in cast iron. In this study, 3D and 2D numerical simulations are used to evaluate singular stress fields near crack tip and fracture mechanics parameters. Moving finite element technique, 2D and 3D Delauney automatic mesh generation and contact-noncontact evaluation is introduced into the numerical method. Dynamic fracture thoughness is decreased with increase of impact loading velocity. Fracture mode-ratio corresponds to initial kink angle of fracture path. The numerical result shows that the maximum hoop stress criterion cannot be applied to dynamic fracture of cast iron.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1253-1254
• /
• 2010

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 2006년도 하계종합학술발표회 논문 초록집
• /
• pp.294-294
• /
• 2006

• 대한토목학회논문집
• /
• 제34권3호
• /
• pp.895-906
• /
• 2014

대수심 부유 구조물의 하부기초 기술 중 하나인 dynamically penetration anchor (DPA 또는 흔히 torpedo anchor로 칭함)의 거동특성을 시험결과 및 수치 해석적 접근을 통해 분석하였다. 기존의 유한요소 해석기법으로는 이러한 대수심 anchor 구조물의 거동 특성을 적절히 모사하기 어렵기 때문에 본 연구에서는 이러한 부분을 해결하기 위해 Coupled Eulerian-Lagrangian (CEL) 법을 통해 지반-구조물 사이에서 발생하는 메쉬(mesh)의 distortion 현상 및 경계조건 등의 문제점을 대변형의 관점에서 해결하고자 하였다. 실측치와의 비교를 통해, CEL 기법의 타당성을 검증하였고, 그 결과 본 연구에서 적용한 CEL 기법이 기존 유한요소 기술로는 구현이 불가능한 대수심 anchoring system의 자유낙하에 의한 전반적인 거동 및 지반의 변형특성을 적절히 예측함을 알 수 있었다. 또한 검증된 기법을 바탕으로 dynamic anchor의 거동에 영향을 주는 여러 요소들에 대한 매개변수 연구를 추가로 수행하였다.