• Journal of Information Display
• /
• 제11권1호
• /
• pp.33-38
• /
• 2010

The propagation of cracks was quantitatively analyzed in $Al_2O_3$ ceramic using the mechanoluminescence (ML) of $SrAl_2O_4$:Eu,Dy. The bridging zones behind the crack tip were clearly detected in the crack path of $Al_2O_3$ within a realistic time frame. The magnitudes and shapes of the bridging stress distributions changed with the advancing cracks. They continued to change with the change in the applied load even after the cessation of crack propagation. Effective toughening then commenced, and the applied stress intensity factors dramatically increased up to ~50 MPa $\sqrt{m}$. The expected $K_{Tip}$ values based on the instantaneous bridging stress distributions obtained from the ML observations deviated greatly from those obtained from the measurement using the conventional crack tip lengths; rather, they support the results obtained when bridging tips were used in the quasidynamic crack propagations.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1676-1681
• /
• 2006

We report on Organic Vapor Phase Deposition $(OVPD^{(R)})$ an innovative deposition technology for organic light emitting device (OLED) and organic semiconductor manufacturing. The combination of $OVPD^{(R)}$ with Close Coupled Showerhead (CCS) technology results in manufacturing equipment with vast potential for cost effective manufacturing of OLED displays commercially competitive to LCD. The actual $OVPD^{(R)}$ equipment concept and design is discussed: Computational Fluid Dynamic (CFD) modeling is compared with experimental results proving the excellent controllability of the deposition process. Further other production relevant deposition properties are being reviewed e.g. high deposition rates and high organic material utilization efficiency of the $OVPD^{(R)}$ - Technology. Data from devices made by $OVPD^{(R)}$ show comparable/ superior performance to those fabricated with conventional vacuum thermal evaporation (VTE) techniques. An outlook on further potentials of $OVPD^{(R)}$ with respect to enabling advanced organic device structures is given.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1153-1156
• /
• 2005

A backlight for large-area LCD (Liquid Crystal Display)-TVs has been developed using Light Emitting Diodes (LEDs). Performances of the backlight and the methods driving the LEDs are introduced in this research. A spectral relationship between the LEDs and the color filters of a panel were investigated as well. In order to realize a CRT like dynamic effect, the area-focused luminance control (AFLC) technology was adopted in developing the backlight. Thus, a possibility of applying the LEDs to the backlight for large-area LCD-TVs was systematically proved.

• 반도체디스플레이기술학회지
• /
• 제8권4호
• /
• pp.95-100
• /
• 2009

This paper presents an efficient disparity matching, using sum of absolute difference (SAD) and dynamic programming (DP) algorithm. This algorithm makes use of one of area-based algorithm which is the absolute sum of the pixel difference corresponding to the window size. We use the information of the right eye brightness (B) and the left eye brightness to get an best matching results and apply the results to the left eye image using the window go by the brightness of the right eye image. This is that we can control the brightness. The major feature of this algorithm called SAD+DP+B is that although Root Mean Square (RMS) performance is slightly less than SAD+DP, due to comparing original image, its visual performance is increased drastically for matching the disparity map on account of its matching compared to SAD+DP. The simulation results demonstrate that the visual performance can be increased and the RMS is competitive with or slightly higher than SAD+DP.

• 반도체디스플레이기술학회지
• /
• 제8권4호
• /
• pp.89-94
• /
• 2009

The influence on a stability of thermal plasma has been investigated in an electrode structure of non-transferred plasma torch. The variations of dynamic characteristic of the arc voltage was analyzed and compared in terms of voltage character and nozzle types for both the step-shaped nozzles and magnetic-approved cylindrical nozzle. From the experimental results, an electrode gap, flow rate of arc gas, and currents are considered as major operational parameters. As conclusion, it was assured that a torch with step-shaped nozzles of magnetic-approved type produce the stable plasma jet.

• 센서학회지
• /
• 제20권3호
• /
• pp.162-167
• /
• 2011

In this paper, we propose a vision system using a field programmable gate array(FPGA) and a smart vision chip. The output of the vision chip is varied by illumination conditions. This chip is suitable as a surveillance system in a dynamic environment. However, because the output swing of a smart vision chip is too small to definitely confirm the warning signal with the FPGA, a modification was needed for a reliable signal. The proposed system is based on a transmission control protocol/internet protocol(TCP/IP) that enables monitoring from a remote place. The warning signal indicates that some objects are too near.

• 대한전자공학회논문지
• /
• 제20권5호
• /
• pp.16-22
• /
• 1983

유리기저에 실크스크린 인쇄기법을 이용하여 투명전극형성용 유기점액인 ITO와 silver paste로써 투명전극 및 금속 전극을 형성하고 SiO 막을 입혀서 액정 매트릭스 표시기를 제작하였다. Rubbing technique로 액정분자를 유리기저에 평행으로 배열시키고, 액정의 동적산란현상을 이용하여 3:1 주소지정방식으로 한글, 알파벳, 숫자 등의 표시를 시도하였다. 제작된 6μm 두께의 표시기에 전압을 변화시키면서 그에 따른 응답파형을 관찰하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.567-570
• /
• 2002

The LVDS (Low Voltage Differential Signaling) I/O cells, fully compatible with ANSI TIA/ EIA-644 LVDS standard, are designed using a 0.35${\mu}m$ standard CMOS technology. With a single 3V supply, the core cells operate at 1.34Gbps and power consumption of the output driver and the input receiver is 10. 5mW and 4.2mW, respectively. In the output driver, we employ the DCMFB (Dynamic Common-Mode FeedBack) circuit which can control the DC offset voltage of differential output signals. The SPICE simulation result of the proposed output driver shows that the variation of the DC offset voltage is 15.6% within a permissible range. In the input receiver, the proposed dual input stage with a positive feedback latch covers rail-to-rail input common-mode range and enables a high-speed, low-power operation. 5-channels of the proposed LVDS I/O pair can handle display data up to 8-bit gray scale and UXGA resolution.

• 응용통계연구
• /
• 제25권4호
• /
• pp.661-668
• /
• 2012

For displaying multivariate numerical data on a 2D plane by the projection, principal components biplot and the GGobi are two main tools of data visualization. The biplot is very useful for capturing the global shape of the dataset, by representing $n$ observations and $p$ variables simultaneously on a single graph. The GGobi shows a dynamic movie of the images of $n$ observations projected onto a sequence of unit vectors floating on the $p$-dimensional sphere. Even though these two methods are certainly very valuable, there are drawbacks. The biplot is too condensed to describe the detailed parts of the data, and the GGobi is too burdensome for ordinary data analyses. In this paper, "the local projective display(LPD)" is proposed for visualizing multivariate numerical data. Main steps of the LDP are 1) $k$-means clustering of the data into $k$ subsets, 2) drawing $k$ principal components biplots of individual subsets, and 3) sequencing $k$ plots by Hurley's (2004) endlink algorithm for cognitive continuity.

• 한국정밀공학회지
• /
• 제18권2호
• /
• pp.140-145
• /
• 2001

The tape carrier package(TCD) is one of the most important components in a liquid crystal display(LCD) module. It has a role to transmit electrical signals from a printed circular board(PCB) to a display panel. If TCP is damaged under mechanical shock, the signals can not be transmitted to the panel and as a result, some dead lines are generated on the panel. This kind of phenomenon is commonly called as 'line defects'. In this paper, new structural design concepts of TCP are proposed to guarantee its reliability by using Taguchi's approach and dynamic FE-analysis. The line defects problem of TCP module is solved by replacing the original TCP with the newly designed one.