• Journal of Advanced Marine Engineering and Technology
• /
• 제24권3호
• /
• pp.20-28
• /
• 2000

Air wiping technique is widely used because of easy and efficient coating control in present CGL The coating weight is controlled by nozzle header pressure. strip line speed, and the distance between strip and nozzle. Coating defects are resulted from the unbalance of these control factors and the inaccuracy of coating equipments. We investigates the main cause of coating defects, such as edge overcoating and coating deviation through various experiments. It is found that the edge overcoating is mainly come from nozzle lip type, and the coating deviation is caused by the unbalance of dynamic pressure.

• 한국소음진동공학회논문집
• /
• 제15권7호
• /
• pp.781-787
• /
• 2005

The correlation dimension can provide some intrinsic Information of an underlying dynamic system by reconstructing measured nonlinear time series. The vibration signals measured from a rotor with different clearance sizes between shaft and bushing were analyzed using the correlation dimension. The results showed that the correlation dimension can identify the size of the clearance of a rotor and the lubricating condition, which can not be analyzed by frequency spectrum or wavelet. The magnitude of the correlation dimension became smaller as the clearance larger and as the lubrication condition better.

• 대한핵의학회지
• /
• 제19권2호
• /
• pp.65-68
• /
• 1985

The radioisotope study using $^{99m}Tc-macroaggregated$ Albumin is a simple, non-invasive test for the diagnosis of pulmonary arteriovenous fistula(PAVF). It can show the presence. of the right-to-left shunt at the lung level using the dynamic study, and also the shunt fraction can be estimated. Here we presented the results of the radioisotope study on two patients with PAVF. In one patient, the cardiac catheterization was clone and calculated shunt fractions by both method were well matched.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.453-459
• /
• 2002

In this paper. the correlation among vibration. wear and temperature are experimentally investigated when rubbing is caused by static and dynamic forces. Each measurement reflects the characteristics of the system and is useful in detecting and diagnosing the current status of rotating machinery. For experiment, the rotor system with lubricating equipment such as trochoid pump, oil tank and wear detecting sensor is implemented to simulate the rubbing condition. Experimental results show that significant change in wear quantity can be notified when vibration signal is changed by rubbing. The results can be applied to system monitoring and fault diagnosis in rotating machinery.

• 한국안전학회지
• /
• 제7권1호
• /
• pp.31-38
• /
• 1992

This paper presents a study on application of expert system technique for the diagnosis of fire-causes in plants. A need is recognized for new methods to diagnose exactly the causes of fires without the help of the human experts. To cope with the difficulty, the expert system techiuque is applied to this area. The expert system suggested in this paper is developed to infer the causes of fires(or, ignition source ) by using the information drawn from the circumstances in fire. For the convenience of inference, ignition sources we classified into eight types ; elecoic spark, adiabatic compression, welding spark, material of high temperature, impact and friction, spontaneous ignition, naked fire, and static electricity. The knowledge base is composed of the rule base and dynamic database, which contain the rules and facts obtained by the expenence in this area, respectively. Both depth-first search and backward chaining schemes are used in reasoning process. This expert system is written in an artificial intelligence language "PROLOG", and its availability is demonstrated through the case study.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.489-492
• /
• 2008

Nowadays in order to estimate safety diagnosis of bridge, a lot of data like static and dynamic displacement, accelerometer, wind velocity and so on are demanded. When it comes to measure these data, cabled sensor is essential equipment. But cabled sensors have also inefficient factors. From this point of view, considering practical aspects of using these expensive equipments which have been used to examine safety diagnosis, measuring by cabled sensors is restrictive in some respect. Recently to improve theses problems, Wireless sensor system was introduced. But this system can't perform intelligent reaction because database of this system is just based on internet. In this paper, the intelligent bridge safety management model which can be installed easily, measured at all times and dealing intelligently with various situations is developed to improve these problems.

• 한국항해학회지
• /
• 제16권1호
• /
• pp.1-12
• /
• 1992

In this study, the self test-system for the marine Gyrocompass was developed and the obtained results are summarized as follows : 1) Utilizing the newly developed self-test system, the time length for observing the transient state of Gyrocompass reading which has been over 4 hours can be reduced to less than 20 minutes. In addition, the dynamic characteristics of the Gyrocompass can be measured within 2 hours after starting the system. 2) Prior test and diagnosis was done by checking all parameters recurrently with period of 2.5minutes. 3) Testing and diagnosis results was shown in graphic mode and could be transmitted to INMARSAT unit using personal computer. 4) The results of the newly designed trouble algorithm for the system was found to be applicable under arbitrary given conditions.

• Parasites, Hosts and Diseases
• /
• 제45권2호
• /
• pp.77-85
• /
• 2007

Among several diagnostic tools for clonorchiasis (Clonorchis sinensis infection), radiologic examinations are commonly used in clinical practices. During the 2 past decades, many reports regarding imaging findings of clonorchiasis were introduced. The basic imaging finding of clonorchiasis is diffuse dilatation of the peripheral intra-hepatic bile ducts, without dilation of the large intrahepatic or extrahepatic bile ducts. By this finding, however, active clonorchiasis cannot be differentiated from cured infection. Some recent radiologic studies suggested specific findings of active clonorchiasis. Besides direct demonstration of worms, increased periductal echogenicity on sonography and periductal enhancement on dynamic contrast-enhanced CT or MR imaging possibly represent active clonorchiasis. Those images of the liver clonorchiasis are known to be correlated with worm burdens (EPG counts) in their frequency and also severity. The images of cholangiocarcinoma associated with clonorchiasis show both the tumor with obstruction images and diffuse dilatation of the peripheral intrahepatic bile ducts. Radiological images can be a good practical alternative diagnostic method of clonorchiasis.

• 대한전자공학회논문지
• /
• 제23권6호
• /
• pp.874-880
• /
• 1986

A new diagnastic method for detection and location of faults in a linear time-invariant system is proposed. The fault detection algorithm is formulated in a signal space, while the fault location algorithm with estimation is done in a parameter space. In a way different from the conventional approach, the method of fault location with estimation is studied to apply the new concept to establish the models with an unknown parameter under the assumption of 1-fold fault. According to computer simulation, the proposed diagnostic method is effective as an algorithm for fault diagnosis of industdrial process controllers.

• 한국방사선학회논문지
• /
• 제10권4호
• /
• pp.247-253
• /
• 2016

초음파 장비는 여러 질환을 진단하는 장비로서 널리 사용되고 있으나, 초음파영상 품질의 평가방법에서는 정량적 표준이 없는 실정이다. 따라서 본 연구에서는 ATS-539 다목적 팬텀 내 8 mm 표적의 파라미터로서 주파수, Dynamic range, 초점수를 변화하여 예민도의 SNR과 영상의 히스토그램을 분석하고 왜곡도를 측정하여 표적별 적합한 주파수 및 파라미터를 도출하여 초음파영상의 병변 진단율을 향상 하고자 한다. 실험재료는 초음파 장비, ATS-539 다목적 팬텀을 사용하며, 실험방법은 영상 평가 팬텀의 8 mm를 주파수(2, 3, 4 MHz, 하모닉 3, 4, 4.5 MHz), Dynamic range(58, 68, 78, 88, 98), Focus(2, 4, 6개)를 변화시키면서 85장의 영상을 획득한다. 8 mm 영상의 예민도를 Image J 프로그램에서 각 표적별 SNR을 측정하고, 왜곡도는 신호의 히스토그램에서 백그라운드 값을 뺄셈하여 측정한다. 측정 결과 값에서 상위 40% 결과에서 파라미터 변화에 따라 예민도의 SNR, 왜곡도의 변화양상의 데이터 값을 산출하여 초음파 장비에서 적절한 영상의 품질을 나타내는 파라미터를 도출하였다. 결과는 초점수가 증가하면 SNR이 높고 왜곡도가 감소하며, 주파수 4 MHz에서 SNR값이 높고 왜곡도가 감소하였다. 그리고 Dynamic range 88, 98에서 최적의 영상을 나타내었으며, 실험 결과값을 기초로 초음파영상의 품질을 평가한다면 보다 정확한 초음파 진단이 가능할 것으로 사료된다.