• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권11호
• /
• pp.5360-5376
• /
• 2017

In this paper, we study the cross-layer design for the AMC/HARQ-based wireless networks, and propose a new dynamic transmission-mode selection scheme to improve system spectrum efficiency. In the proposed scheme, dynamic thresholds for transmission-mode selection in each packet transmission and retransmission are jointly designed under the constraint of the overall packet error rate. Comparing with the existing schemes, the proposed scheme is inclined to apply higher modulation order at the first several (re)transmissions, which corresponds to higher-rate transmission modes thus higher average system spectrum efficiency. We also extend the cross-layer design to MIMO (Multi-input Multi-output) communication scenarios. Numerical results show that the proposed new dynamic transmission-mode selection scheme generally achieves higher average spectrum efficiency than the conventional and existing cross-layer design.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.1177-1183
• /
• 2005

This paper presents the effects of dynamic response of the railway bridge through the suspension system when the train is moving with uniform speed and non-uniform speed Railway bridges are subjected to dynamic loads generated by the interaction between moving vehicles and the bridge structures. these dynamic loads result in response fluctuation in bridge members. To investigate the real dynamic behavior of the bridge, a number of analytical and experimental investigation should be carried out. This paper, a train/bridge interaction analysis program considerate braking action. New scheme consideration of braking action on the bridge using speed-dependent braking function is presented. This program also used torsional degree of freedom and constraint equation based on geometrical relationship in order to take into consideration three-dimensional eccentricity effect due to the operation on double track through quasi three-dimensional analysis.

• 설비공학논문집
• /
• 제14권1호
• /
• pp.10-20
• /
• 2002

A dynamic model of a water heater system heated by a heat pump was developed. The water heater system was composed of heat pump and hot water reservoirs. Finite volume method (FVM) was applied to describe the heat exchangers. A new constraint on electronic expansion valve (EEV) or thermostatic expansion valve (TXV) that can control superheat after the evaporator was developed. Dynamic performances were evaluated for various sizes of the reservoir. In order to compare those performances, time scale was normalized by time constant representing the characteristics of reservoir size. Time constant was determined from quasi steady-state simulation of the system. From the simulation, the size of the water heater reservoir was found to have a large influence on the transient performance of the sys- tem. Therefore, the optimization of the reservoir size is needed in a design process.

• 한국소음진동공학회논문집
• /
• 제15권11호
• /
• pp.1255-1261
• /
• 2005

The dynamic contact model of a beam that contacts to a rigid wall in a reactor core was studied. The gap between the beam and contact wall results in dynamic contact accompanying inequality constraints. The inequality constraints can be relieved to an equality constraint problem by introducing a convex Penalty function. In this work, a beam with contact condition is formulated using quasi-convex penalty function and numerically solved. General coordinate solution is adopted to raise computational efficiency. Also nonlinearity is examined In the beam contacting to a rigid wall.

• 대한음성학회지:말소리
• /
• 제38호
• /
• pp.71-97
• /
• 1999

In this paper I have surveyed vowel phonemes in a variety of English accents and have proposed the vowel systems of English. The English accents covered in this paper include General American English, Northeastern American English, Western American English, Southern British English, Northern British English, Scottish English, Southern Irish English, Northern Irish English, Australian English, and New Zealand English. The vowel systems proposed here reflect the acoustic information of vowels and phonological aspects of English. This paper offers an Optimality Theory-based analysis of the English vowel systems by appealing to independently motivated constraints. This paper, following Flemming(1995), makes an assumption that the vowel system in question is selected in output as an optimal candidate by a given constraint ranking, the assumption which is different from the view that the vowel system is fixed in input. The analysis proposed here gives an answer to why a specific vowel system is selected and why dialectal variations come about. It is shown in this paper that the vowel system selected in a specific dialect comes from an optimal satisfaction of a given constraint ranking and that dialectal differences result from dynamic permutations of the same constraints. The constraint-based analysis proffered here accounts well for the similarities and differences among dialects in regard to the vowel system.

• 제어로봇시스템학회논문지
• /
• 제22권5호
• /
• pp.320-325
• /
• 2016

This paper presents a robust finite-time sliding mode control (SMC) scheme for unknown disturbance and unmodeled nonlinear friction and dynamics in the robotic manipulator. A finite-time SMC (FSMC) surface and finite-time sliding mode controller are constructed to obtain faster error convergence than the conventional infinite-time based SMC. By adding prescribed constraint control term to a finite-time SMC to compensate for unknown disturbance and uncertainties, a robust control scheme can be designed as well as faster convergence control. In addition, simpler controller structure is built by using feed-forwarding upper bound coefficients of each manipulator dynamic parameters instead of model-based control or adaptive observer to estimate unknown manipulator parameters. Simulation and experimental evaluations highlight the efficacy of the proposed control scheme for an articulated robotic manipulator.

• 한국정밀공학회지
• /
• 제30권1호
• /
• pp.18-23
• /
• 2013

Omni-directional robot is a typical holonomic constraint robot that has three degrees of freedom movement in 2D plane. In this study, a new omni-directional robot whose wheels are arranged in radial directions was proposed to improve driving performance of the robot. Unlike a general omni-directional robot whose wheels were arranged in a circumferential direction, moments do not arises in the proposed robot when the robot travels in a straight line. To analyze driving performance, dynamic modeling of the omni-directional robot, which considers friction and slip, was carried out. By friction measurement experiments, the relationship between dynamic friction coefficient and relative velocity was derived. Dynamic friction coefficient according to the angle difference between robot travel direction and wheel rotation direction was also obtained. By applying these results to the dynamic model, driving performance of the robot was calculated. As a result, the proposed robot was 1.5 times faster than the general robot.

• Journal of information and communication convergence engineering
• /
• 제8권2호
• /
• pp.212-218
• /
• 2010

In wireless sensor networks (WSNs), both efficient energy management and Quality of Service (QoS) are important issues for some applications. For creating robust networks, real-time services are usually employed to satisfy the QoS requirements. In this paper, we proposed a hierarchical real-time MAC (medium access control) protocol for (m,k)-firm constraint in wireless sensor networks shortly called HRTS-MAC. The proposed HRTS-MAC protocol is based on a dynamic priority assignment by (m,k)-firm constraint. In a tree structure topology, the scheduling algorithm assigns uniform transmitting opportunities to each node. The paper also provides experimental results and comparison of the proposed protocol with E_DBP scheduling algorithm.

• 한국산업융합학회 논문집
• /
• 제4권1호
• /
• pp.87-94
• /
• 2001

In multibody dynamics, differential and algebraic equations which can satisfy both equation of motion and kinematic constraint equation should be solved. To solve this equation, coordinate partitioning method and constraint stabilization method are commonly used. The coordinate partitioning method divides the coordinate into independent and dependent coordinates. The most typical coordinate partitioning method arc LU decomposition, QR decomposition, projection method and SVD(sigular value decomposition).The objective of this research is to find a efficient coordinate partitioning method in flexible multibody systems and a hybrid decomposition algorithm which employs both LU and projection methods is proposed. The accuracy of the solution algorithm is checked with a slider-crank mechanism.

• 한국전산구조공학회논문집
• /
• 제12권3호
• /
• pp.495-508
• /
• 1999

변형된 라이저의 단위 접선벡터상의 운동학적 제약조건을 적용하여 심해저 라이저의 비선형 동적해석을 행한다. 이 조건의 적용으로 자유도수를 감소시킬 수 있으며 심한 비선형성으로 인한 해의 발산 가능성을 제거할 수 있다. 라이저의 거대변형으로 인한 기하학적 비선형성과 비선형 경계조건이 고려된다. 또한, 비선형성이 포함되는 수동학적 하중이 조류와 파랑에 의해 발생하여 내부에 정상류가 흐르는 라이저관의 외벽에 작용하게 된다. 이 외에도라이저 자체의 축방향 변형조건을 고려한다. Galerkin의 유한요소 근사화와 시간증분자를 적용하여 유한요소에 대한 평형 메트릭스 방정식을 유도하고, 수치해석을 위한 알고리즘을 제안하며 API 보고서의 결과와 비교함으로써 제안된 모델이 검증된다. 또한, 기하학적 비선형성으로 인한 영향을 조사하였다.