• 대한교통학회지
• /
• 제20권3호
• /
• pp.129-147
• /
• 2002

본 연구에서 변동등식에 근거한 동적경로선택조건을 도출하여 동적통행배정모형을 제안한다. 동적경로선택조건은 운전자에 의해 이용된 경로, 링크 그리고 출발지의 출발시간을 고려하여 도출되며 이 조건을 동적통행배정모형으로 전환하는 과정에서 모형의 변동등식문제로 압축된다. 등식이론에 근거한 모델의 이론적 배경을 입증하기 위해 제안된 동적통행배정모형이 필요충분조건을 만족함이 증명되었다. 해법으로서 기존의 제안된 네트워크의 시간과 공간확장기법을 채택하지 않고 물리적 네트워크가 직접 알고리즘에 반영되도록 하기 위해 각 링크의 시간대별 통행량과 방출통행량을 링크진입통행으로 표현하여 시간종속 통행시간함수를 단일변수로 처리하여 대각화알고리즘에 반영하였다. 소규모 비대칭 네트워크 적용결과 사용자 동적최적경로선택조건이 만족됨을 입증하였는데 단위시간간격이 적을수록 개선된 효과를 보여준다. I-394네트워크 실험결과로서 기존의 변동부등식에 근거한 알고리즘에 비해 제안된 알고리즘이 최소한 93%이상의 컴퓨터연산 속도의 개선효과를 가져왔다. 등식이론에 근거한 모델개발의 장점으로서는 제안된 모델의 최적해의 계산시간이 전체시간의 증가에 전혀 영향을 받지 않는다는 것으로 이는 동적통행배정모형에 적용될 네트워크의 규모가 커질수록 제안된 알고리즘의 계산 효율성은 더욱 증가하는 것을 의미한다. 따라서 제안된 동적통행배정모형은 대규모 시간종속적 교통망에서 교통상황의 변화에 민감하게 반응할 수 있는 실시간첨단교통제어의 핵심기능으로서 역할수행이 기대된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.974-978
• /
• 1991

Electro-pneumatic valve is an electro-mechanical device which converts electric signal into pneumatic flow mu or pressure. A measurement of dynamic response time is very important to evaluate valve performance. Dynamic response time of electro-pneumatic valve has a variation accordance with valve types, operating way and test standard. In this study, automatic measurement system of dynamic response time is composed based on test condition of dynamic response time test standard(CETOP, JIS). Also, in this study test pressure variation characteristics accordance with variation of solenoid excitation power, and we developed dynamic response measurement system enable to compare of and analyze these two characteristics.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.35-36
• /
• 2006

This study is mainly concerned with vibration control of L-type reciprocating air compressor by a dynamic vibration absorber. The dynamic vibration absorber of reciprocating air compressor was designed for constant revolution running condition. For the review, Vibration test was conducted for the performance appraisal of installed dynamic vibration absorber in the reciprocating air compressor. As a result of the test, the performance of dynamic vibration absorber was satisfactory.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.329-334
• /
• 2002

Preliminary test for the design and construction of a tuned dynamic absorber is a conducted. Proposed tuned dynamic absorber is a cantilevered beam type, and is supposed to adjust its natural frequency according to the changing operation condition of the primary system. The modal mass of the dynamic absorber is the easiest to control, therefore, the position of the attached mass of the dynamic absorber is considered as the main design parameter of the absorber. The effect of the dynamic absorber is experimentally verified under various operation conditions of the primary system.

• 한국소음진동공학회논문집
• /
• 제19권8호
• /
• pp.773-780
• /
• 2009

The facility equipments generate dynamic force on building floor and the force can be measured with force transducer. However, this method depends on the measuring capacity or range of sensor, or mounts installation condition of equipments. Because of this restricting condition on force measuring system, this paper suggests a indirect method, the TPA(transfer path analysis) method, that produces a closely approximate dynamic force of equipments. This method calculates the dynamic force by using transfer response function. Firstly, the calculated dynamic force of impact load and continuous load was respectively compared with the sensor-measured value to examine the accuracy of TPA method. After that, the dynamic force and response induced by large facility equipments - a cooling tower, AHU and a large ventilator - were calculated by TPA method and the validity of these value were examined.

• Safety and Health at Work
• /
• 제4권1호
• /
• pp.46-51
• /
• 2013

Objectives: Load carrying tasks are recognized as one of the primary occupational factors leading to slip and fall injuries. Nevertheless, the mechanisms associated with load carrying and walking stability remain illusive. The objective of the current study was to apply local dynamic stability measure in walking while carrying a load, and to investigate the possible adaptive gait stability changes. Methods: Current study involved 25 young adults in a biomechanics research laboratory. One tri-axial accelerometer was used to measure three-dimensional low back acceleration during continuous treadmill walking. Local dynamic stability was quantified by the maximum Lyapunov exponent (maxLE) from a nonlinear dynamics approach. Results: Long term maxLE was found to be significant higher under load condition than no-load condition in all three reference axes, indicating the declined local dynamic stability associated with load carrying. Conclusion: Current study confirmed the sensitivity of local dynamic stability measure in load carrying situation. It was concluded that load carrying tasks were associated with declined local dynamic stability, which may result in increased risk of fall accident. This finding has implications in preventing fall accidents associated with occupational load carrying.

• Tribology and Lubricants
• /
• 제14권3호
• /
• pp.39-45
• /
• 1998

Reynolds equation, which describes behavior of fluid film in journal bearings, basically satisfies mass conservation. But, boundary conditions usually used with this equation, e.g. half Sommerfeld or Reynolds boundary conditions, cannot fulfill this natural law of conservation. In the case of connecting rod bearing, where applied load is dynamic and its magnitude is relatively large, such unrealistic boundary conditions have serious influence on calculation results, especially on lubricant flow rate or power disspation which are important parameters in thermal analysis. In this paper, mass-conserving boundary condition was applied in the finite element analysis of connecting rod bearings. Lubricant flow rate and power dissipation rate were calculated together with journal center locus, minimum film thickness and maxmium film pressure. These computation results were compared with those of the case of Reynolds boundary condition. Balance between inlet and outlet flow rate was well achieved in the case of mass-conserving boundary condition.

• 한국전문물리치료학회지
• /
• 제22권1호
• /
• pp.30-36
• /
• 2015

The purpose of this study was to examine the relationships between the ankle dorsiflexion passive range of motion (DF PROM) under a non-weight bearing condition and the normalized reach distance in three directions of the Y-Balance Test (YBT). Sixty-one healthy adults (32 males and 29 females, age: $23.0{\pm}3.0$ years, height: $169.3{\pm}8.9cm$, weight: $61.9{\pm}5.4kg$) participated in this study. The ankle DF PROM was measured using a goniometer. To assess dynamic balance, all subjects performed three trials to determine the maximum lower extremity reach in the anterior, posteromedial, and posterolateral directions of the YBT. The relationship between the ankle DF PROM and both the normalized reach distance in each direction and the composite score of the YBT were analyzed using the Pearson correlation. Only the normalized reach distance in the anterior direction of the YBT was significantly related to the ankle DF PROM measured under a non-weight bearing condition (r=.50, p<.001). Neither the normalized reach distances in the posterior directions nor the composite score of the YBT were significantly correlated with the ankle DF PROM measured under a non-weight bearing condition. These findings suggest that ankle DF PROM does not affect the overall dynamic balance of the lower extremity, with only the anterior dynamic balance affected among the three directions.

• 대한기계학회논문집A
• /
• 제24권10호
• /
• pp.2568-2580
• /
• 2000

This paper presents a quasi-static optimization technique for elastic structures under dynamic loads. An equivalent static load (ESL) set is defined as a static load set which generates the same displacement field as that from a dynamic load at a certain time. Multiple ESL sets calculated at every time step are employed to represent the various states of the structure under the dynamic load. They can cover every critical state that might happen at an arbitrary time. Continuous characteristics of dynamic load are simulated by multiple discontinuous ones of static loads. The calculated sets of ESLs are applied as a multiple loading condition in the optimization process. A design cycle is defined as a circulated process between an analysis domain and a design domain. Design cycles are repeated until a design converges. The analysis domain gives a loading condition necessary for the design domain. The design domain gives a new updated design to be verified by the analysis domain in the next design cycle. This iterative process is quite similar to that of the multidisciplinary optimization technique. Even though the global convergence cannot be guaranteed, the proposed technique makes it possible to optimize the structures under dynamic loads. It has also applicability, flexibility, and reliability.

• 한국지반공학회논문집
• /
• 제34권7호
• /
• pp.51-58
• /
• 2018

본 연구에서는 하중 조건에 따른 지반-말뚝 상호작용 시스템의 거동 차이를 분석하기 위해 일련의 원심모형 실험을 수행하였다. 정적 하중 조건의 경우, 말뚝 직경의 50% 수준까지 변위제어를 통해 하중을 재하하였으며, 지진 하중 조건의 경우 0.1g~0.4g 수준으로 1Hz 정현파를 가진하였다. 실험 결과로부터 얻은 정적 및 동적 p-y 곡선을 API p-y 곡선과 비교한 결과, API p-y 곡선과 정적 하중조건에서의 실험 p-y 곡선은 최대 지반반력 값이 20% 이내의 오차를 보인 반면, 동적 하중 조건에서의 실험 p-y 곡선과는 최대 지반반력 값이 5배 이상 차이가 발생하였다. 이는 등가정적 해석에서 기존 API p-y 곡선을 적용할 경우 비선형 영역에서 지반 반력을 크게 과소평가하며 보수적 설계를 야기할 수 있음을 의미한다.