• The KIPS Transactions:PartB
• /
• v.18B no.3
• /
• pp.157-164
• /
• 2011

This paper presents a fast and scalable re-routing algorithm that adapts to dynamically changing networks. The proposed algorithm integrates Dijkstra's shortest path algorithm with the genetic algorithm. Dijkstra's algorithm is used to define the predecessor array that facilitates the initialization process of the genetic algorithm. After that, the genetic algorithm re-searches the optimal path through appropriate genetic operators under dynamic traffic situations. Experimental results demonstrate that the proposed algorithm produces routes with less traveling time and computational overhead than pure genetic algorithm-based approaches as well as the standard Dijkstra's algorithm for large-scale networks.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.5
• /
• pp.139-144
• /
• 2007

The mobile terminal's frequent changes to the access point introduce significant network overhead in mobile IP networks. To solve this problem, we introduce a hierarchical structure with consideration given to the dynamic value of neighbor scope in IP regional registration[1]. When a mobile terminal moves within the neighbor given by the scope value, it makes registration locally without registration with its home agent. We analyze the algorithm mathematically and show the numerical results. As a result, optimization of the scope value for the localized registration under the hierarchical structure makes the proposed scheme outperform the standard mobile IP protocol[2]. This can be explained from the fact that there is only local registration for terminal's movement within the scope region. Moreover, as the signaling cost for home agent increases, the proposed scheme becomes more advantageous.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.4
• /
• pp.243-248
• /
• 2022

Weight optimization was performed for a rotorcraft shaft system using one-dimensional Euler-Bernoulli beam elements. Torsion, shaft support stiffness such as bearings, flange mass are all considered. To guarantee structural dynamic stability, eigenvalue analysis was performed to avoid critical speed and tooth mesh excitation form the gearbox. The weight optimization was performed by adjusting the thickness and radius while the length of the shaft was fixed, and the optimization process was divided into two stages. In the first, the weight is optimized with the torsional strength constraint. In the second, the difference between the primary mode of shaft and the critical speed is maximized so that the primary mode of the shaft can avoid the critical speed while the constraint on the torsional strength of the shaft is satisfied according to the standard for shaft system stability (AMC P 706-201, 1974). The proposed method was verified by comparing the results of the optimal design using the given one-dimensional beam elements with the stress results of the 3D finite element and the actual manufactured shaft.

• The Journal of Engineering Geology
• /
• v.23 no.4
• /
• pp.457-465
• /
• 2013

We integrated and correlated datasets from surface and subsurface geophysics, drilling cores, and engineering geology to identify geological interfaces and characterize the joints and fracture zones within the rock mass. The regional geometry of a geologically weak zone was investigated via a fence projection of electrical resistivity data and a borehole image-processing system. Subsurface discontinuities and intensive fracture zones within the rock mass are delineated by cross-hole seismic tomography and analyses of dip directions in rose diagrams. The dynamic elastic modulus is studied in terms of the P-wave velocity and Poisson's ratio. Subsurface discontinuities, which are conventionally identified using the N value and from core samples, can now be identified from anomalous reflection coefficients (i.e., acoustic impedance contrast) calculated using a pair of well logs, comprising seismic velocity from suspension-PS logging and density from logging. Intensive fracture zones identified in the synthetic seismogram are matched to core loss zones in the drilling core data and to a high concentration of joints in the borehole imaging system. The upper boundaries of fracture zones are correlated to strongly negative amplitude in the synthetic trace, which is constructed by convolution of the optimal Ricker wavelet with a reflection coefficient. The standard deviations of dynamic elastic moduli are higher for fracture zones than for acompact rock mass, due to the wide range of velocities resulting from the large numbers of joints and fractures within the zone.

• Analytical Science and Technology
• /
• v.30 no.4
• /
• pp.174-181
• /
• 2017

Bio-liquid is a liquid by-product of the hydrothermal carbonization (HTC) reaction, converting wet biomass into solid hydrochar, bio-liquid, and bio-gas. Since bio-liquid contains various compounds, it requires efficient sampling method to extract the target compounds from bio-liquid. In this research, fatty acid methyl ester (FAME) in bio-liquid was extracted based on hollow fiber supported liquid phase microextraction (HF-LPME) and determined by Gas Chromatography-Flame Ionization Detector (GC-FID) and Gas Chromatography/Mass Spectrometry (GC/MS). The well-known major components of biodiesel, including methyl myristate, palmitate, methyl palmitoleate, methyl stearate, methyl oleate, and methyl linoleate had been selected as standard materials for FAME analysis using HF-LPME. Physicochemical properties of bio-liquid was measured that the acidity was 3.30 (${\pm}0.01$) and the moisture content was 100.84 (${\pm}3.02$)%. The optimization of HF-LPME method had been investigated by varying the experimental parameters such as extraction solvent, extraction time, stirring speed, and the length of HF at the fixed concentration of NaCl salt. As a result, optimal conditions of HF-LPME for FAMEs were; n-octanol for extraction solvent, 30 min for extraction time, 1200 rpm for stirring speed, 20 mm for the HF length, and 0.5 w/v% for the concentration of NaCl. Validation of HF-LPME was performed with limit of detection (LOD), limit of quantitation (LOQ), dynamic range, reproducibility, and recovery. The results obtained from this study indicated that HF-LPME was suitable for the preconcentration method and the quantitative analysis to characterize FAMEs in bio-liquid generated from food waste via HTC reaction.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.509-512
• /
• 2008

Ubiquitous Computing System란, 언제 어디서나 통신 및 컴퓨팅이 가능하고 컴퓨팅 시스템이 상호간에 정보를 공유하고 협력하는 컴퓨팅 시스템이다. 이로써 기존의 컴퓨팅 환경과 같이 사용자와 컴퓨터간의 대화형 상호작용이 아닌 물리적인 환경 상황(Context)등을 시스템이 스스로 인식하고 이를 기반으로 사용자와의 상호 작용을 지원하는 상황인식 기술이 필수적인 요소로 부각되고 있다. 또한, Ubiquitous Computing System을 위해 사용자 및 주변 환경 정보를 감지하는 센서(Sensor) 기술이 필요하다. 하지만 사용자 및 주변 환경으로부터 입력되는 불확실하거나 모호한 상황정보에 대한 표현과 추론에 대한 연구는 부족한 실정이다. 본 논문은 이런 이유에서 Rule-based System을 기반으로 CRS와 DOS의 개념을 도입한 새로운 상황인식 기반의 Architecture를 제안하고, 이를 VHDL을 통해 SoC로 구현하였다. CRS를 통해 실시간으로 다양한 센서에서 들어오는 많은 데이터에 가중치를 부여하여 각 센서마다 중요도를 달리 부여한다. 이로써, System은 Sensor 입력 값의 중요도에 따라 처리 순서를 우선적으로 부여하여 처리 속도를 높인다. 또, DOS를 통해 각양각색의 사용자에게 획일적인 서비스를 제공하는 것이 아니라 상황 변화의 패턴에 따라 개별화되고 특화된 서비스를 제공한다. 마지막으로, Ubiquitous Computing System의 향후 발전 가능성을 예상하고, 본 논문에서 제시한 Context-aware Architecture에 의해 구현된 UoC의 유용성을 짐작해 본다.

• Journal of Digital Convergence
• /
• v.12 no.10
• /
• pp.283-289
• /
• 2014

Personal rapid transit(PRT) systems have been highlighted in future transportation developments as a result of their potential as sustainable and eco-friendly transport solutions that provide demand-responsive mobility services. One of the most important characteristics of the personal rapid transit system(PRT) is that it can be constructed and operated at a low cost. A fundamental study on the alignment of the PRT guideway considering running stability was conducted in the present study. In addition, a parameter analysis of the major alignment design variables such as curve radius, transition curve length and cant was performed by vehicle dynamic analysis and optimum guideway alignments were proposed. The analysis results suggested that the theoretical values were satisfied and also confirmed the possibility of reducing the standard.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7A
• /
• pp.540-547
• /
• 2009

In this paper, we work for the efficient use of the initial ranging contention slot in OFDMA based wireless mobile networks. Specially, the collision reduction method using an automatic adaptive optimal algorithm is studied for initial ranging contention slot used at initial connection of the mobile terminals. As a result, we propose the algorithm that achieves the collision minimization and the auto-dynamic slot arrangement of the initial ranging slots. To evaluate the proposed algorithm, we compare the simulation results of IEEE802.16e fixed initial ranging slot allocation method versus the proposed algorithm. The simulator is developed based on the IEEE802.16e standard MAC frame structure and processing procedures. As the simulation results, we can expect the proposed algorithm can be applied for the unmanned coastal base station because the proposed algorithm has the effect of minimizing administration cost for the base station.

• Journal of the Korea Concrete Institute
• /
• v.23 no.6
• /
• pp.799-808
• /
• 2011

In this study, a standardized test method to analyze tensile properties of multi-directional GFRP plate was proposed. Presently, tensile strength test of FRP composite reinforced with isotropic and orthotropic fiber is standardized according to ISO standard. Also, even though many studies were performed on test method to analyze the dynamic properties, the properties of tensile strength for multi-directional GFRP plate were not clearly identified. Currently, the domestic test method in accordance with ASTM, which is applicable to unidirectional FRP plate, gave tensile test results greater than actual properties. Thus, in this study, GFRP tensile test was conducted using the method found to be commonly applicable to all standards based on literature review of domestic and international references. Then, anchorage length experiments were performed using the proposed tension test method to evaluate validity of the method. Finally, optimal anchorage length was estimated from the numerical analysis to propose the standardized tensile strength method for GFRP multi-directional composite evaluation.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.6
• /
• pp.693-700
• /
• 2012

In this study, the Charpy impact test along with metallurgical observation was conducted to evaluate low temperature impact toughness of structural steel welds with different welding processes to find out the optimal welding process to guarantee the required impact toughness at low temperatures. The welding processes employed are shield metal arc welding (SMAW) and flux cored arc welding(FCAW), which are commonly used welding methods in construction. The Charpy impact test is a commercial quality control test for steels and other alloys used in the construction of metallic structures. The test allows the material properties for service conditions to be determined experimentally in a simple manner with a very low cost. To investigate the impact toughness at low temperatures of the steel welds, specimens were extracted from the weld metal and the heat affected zone. Standard V-notch Charpy specimens were prepared and tested under dynamic loading condition. The low temperature impact performance was evaluated based on the correlation between the absorbed energy and the microstructure. Analysis of the results showed that the optimal welding process to ensure the higher low temperature impact toughness of the HAZ and the weld metal is SMAW process using the welding consumable for steels targeted to low temperature use.