• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1053-1057
• /
• 1987

In this paper, we have studied a communication protocol which may provide Audio/Video data transmission in real time. Auido/Video data have its own characteristics. A new transport protocol with realtime constraint has been designed and implemented which performs dynamic error control and flow control depending on the characteristics of transmitted Audio/Video data. Since the receiving data can be predicted from the previously received data using the prediction function in Auido/Video data transmission, these functions are introduced in our transport protocol that may possibly improve the speed of data transmission and give a real time response. We have tested our transport protocol and measured the performance by the simulation. We assume that our transport protocol would be used in LAN environment. Our prime purpose is to provide a reliable and real time Auido/Video data transmission service.

• Radiation Oncology Journal
• /
• v.15 no.1
• /
• pp.71-78
• /
• 1997

Purpose : To collect beam data for dynamic wedge fields using conventional measurement tools without the multi-detector system, such as the linear diode detectors or ionization chambers. Materials and Methods : The accelerator CL 2100 C/D has two photon energies of 6MV and 15MV with dynamic wedge an91es of 15o, 30o, 45o and 60o. Wedge transmission factors, percentage depth doses(PDD's) and dose Profiles were measured. The measurements for wedge transmission factors are performed for field sizes ranging from $4\times4cm^2\;to\;20\times20cm^2$ in 1-2cm steps. Various rectangular field sizes are also measured for each photon energy of 6MV and 15MV, with the combination of each dynamic wedge angle of 15o 30o. 45o and 60o. These factors are compared to the calculated wedge factors using STT(Segmented Treatment Table) value. PDD's are measured with the film and the chamber in water Phantom for fixed square field. Converting parameters for film data to chamber data could be obtained from this procedure. The PDD's for dynamic wedged fields could be obtained from film dosimetry by using the converting parameters without using ionization chamber. Dose profiles are obtained from interpolation and STT weighted superposition of data through selected asymmetric static field measurement using ionization chamber. Results : The measured values of wedge transmission factors show good agreement to the calculated values The wedge factors of rectangular fields for constant V-field were equal to those of square fields The differences between open fields' PDDs and those from dynamic fields are insignificant. Dose profiles from superposition method showed acceptable range of accuracy(maximum 2% error) when we compare to those from film dosimetry. Conclusion : The results from this superposition method showed that commissionning of dynamic wedge could be done with conventional dosimetric tools such as Point detector system and film dosimetry winthin maximum 2% error range of accuracy.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.943-950
• /
• 2005

Recently, many of researches on stream transmission for satisfying each of different real-time transmission condition of the multimedia data that demands various service quality through high-speed networks have been studied actively. In this paper, we design a scheme that discriminately reserves the network resources for the transmission of each multimedia application and propose a bandwidth allocation scheme for improving the utilization ratio of free resources. And we also propose a pipelining scheme for providing flexible real-time transmission. The proposed schemes can be used to support a real-time transmission by applying feedback transmission control method based on receiving buffer for guaranteeing the synchronization conditions requested by the multimedia data. Moreover, we propose a transmission control scheme that can take the amount of network resources down to the minimum amount within the range of permissible error-range under the guarantee with no quality degradation simultaneously when the bottleneck is caused by the network congestion. Finally, we propose a dynamic bandwidth smoothing scheme that can smooth the maximum bandwidth to the demand of each video steam for giving continuous transmission to the delay sensitive video steam between senders and receivers.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.31-36
• /
• 2002

Even through the problem of misalignment is of great importance, not much work has been reported in the literature on the effect of misalignment on the vibrations of the gear-bearing systems. Therefore, the nonlinear dynamic characteristics of the gear drive system due to misalignment are investigated in this work. Transmission error for helical gear and bearing nonlinear stiffness is calculated. The equation of motion of the gear drive system is modelled using the time-varying gear meshing stiffness, bearing nonlinear stiffness, and bearing pre-load due to the housing deformation. Numerical analysis lot the gear drive system show the result of misalignment effect - sub-harmonic component, bearing pre-load effect, and another nonlinear phenomenon. And the numerical analysis are verified by the experimental result.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.1
• /
• pp.77-84
• /
• 2014

The worm gear is used in the motor drive system of automotive CVVL because of its compactness and self-locking ability. A ZK worm and an involute helical gear can be meshed in order to reduce production cost. However, the gearing is not suitable for the reliability and the NVH problem. To improve the dynamic performances, an optimal design process is considered. The transmission error is calculated theoretically and minimized with the several gear design parameters. An inequality condition such as the teeth interference elimination is added.

• Journal of the Korean Society of Industry Convergence
• /
• v.18 no.1
• /
• pp.53-60
• /
• 2015

For high-accuracy position control of a linear motor, it has been proposed a nonlinear controller including a synchronization algorithm. Linear motors are easily affected by force ripple, friction, and parameter variations because there is no mechanical transmission to reduce the effects of model uncertainties and external disturbances. Synchronization error is also caused by skew motion, model uncertainties, and force disturbance on each axis. Nonlinear effects such as friction and ripple force are estimated and compensated for. The synchronization algorithm is used to reduce the synchronous error of the two side pillars. The performance of the controller is evaluated by computer simulations.

• Journal of Communications and Networks
• /
• v.15 no.4
• /
• pp.422-429
• /
• 2013

Advances in wireless sensor network (WSN) technology have enabled small and low-cost sensors with the capability of sensing various types of physical and environmental conditions, data processing, and wireless communication. In the WSN, the sensor nodes have a limited transmission range and their processing and storage capabilities as well as their energy resources are limited. A triple umpiring system has already been proved for its better performance in WSNs. The clustering technique is effective in prolonging the lifetime of the WSN. In this study, we have modified the ad-hoc on demand distance vector routing by incorporating signal-to-noise ratio (SNR) based dynamic clustering. The proposed scheme, which is an efficient and secure routing protocol for wireless sensor networks through SNR-based dynamic clustering (ESRPSDC) mechanisms, can partition the nodes into clusters and select the cluster head (CH) among the nodes based on the energy, and non CH nodes join with a specific CH based on the SNR values. Error recovery has been implemented during the inter-cluster routing in order to avoid end-to-end error recovery. Security has been achieved by isolating the malicious nodes using sink-based routing pattern analysis. Extensive investigation studies using a global mobile simulator have shown that this hybrid ESRP significantly improves the energy efficiency and packet reception rate as compared with the SNR unaware routing algorithms such as the low energy aware adaptive clustering hierarchy and power efficient gathering in sensor information systems.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.6 no.4
• /
• pp.208-215
• /
• 2013

In recent years, many applications in WSN have increasingly interested in data transfer reliability. In this paper, we propose a dynamic grouping transfer mechanism which maintains both reliability and energy efficiency in transmission from a source to a sink. The proposed scheme considers channel error of each node. Then it uses an end-to-end ACK transmission in a group and a hop-by-hop ACK transmission between groups. Consequently this mechanism minimize the cost of packet transfer along with enhancing the network lifetime and reliability.

• Applied Microscopy
• /
• v.45 no.2
• /
• pp.95-100
• /
• 2015

The in-situ heating transmission electron microscopy experiment allows us to observe the time- and temperature-dependent dynamic processes in nanoscale materials by examining the same specimen. The temperature, which is a major experimental parameter, must be measured accurately during in-situ heating experiments. Therefore, calibrating the thermocouple readout of the heating holder prior to the experiment is essential. The calibration can be performed using reference materials whose phase-transformation (melting, oxidation, reduction, etc.) temperatures are well-established. In this study, the calibration experiment was performed with four reference materials, i.e., pure Sn, Al-95 wt%Zn eutectic alloy, NiO/carbon nanotube composite, and pure Al, and the calibration curve and formula were obtained. The thermocouple readout of the holder used in this study provided a reliable temperature value with a relative error of <4%.

• Journal of information and communication convergence engineering
• /
• v.9 no.6
• /
• pp.625-628
• /
• 2011

Dynamic sensor network(DSN) technology which is based on swarming flight type air node offers analyzed and acquired information on target data gathered by air nodes in rotation flight or 3 dimension array flight. Efficient operation of dynamic sensor network based on air node is possible when problems of processing time, data transmission reliability, power consumption and intermittent connectivity are solved. Delay tolerant network (DTN) can be a desirable alternative to solve those problems. DTN using store-and-forward message switching technology is a solution to intermittent network connectivity, long and variable delay time, asymmetric data rates, and high error rates. However, all processes are performed at the bundle layer, so high power consumption, long processing time, and repeated reliability technique occur. DSN based on swarming flight type air node need to adopt store-and-forward message switching technique of DTN, the cancelation scheme of repeated reliability technique, fast processing time with simplified layer composition.