• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.2
• /
• pp.128-136
• /
• 2001

This paper evaluates the performance of an optic link in a frequency conversion based fiber-radio system. The proposed link structure simplifies a BS(base station) via making the MMW(millimeter wave) optical pilot tone generated in the CS(control station) be used in the uplink as well as in the downlink. To acquire the optical pilot tone, an EOM(electro-optic modulator) in the CS is biased in three different ways, i.e., MAB(maximum bias), MIB(minimum bias), QB(quadrature bias). We, depending on the biasing of the EOM, evaluate the link performances in two cases; one is for constant laser source power and the other for constant received DC optical power at a PD(photo detector). Based on the simulation results on the downlink CNR and the uplink SFDR(spurious free dynamic range), we finally deduce the effective EOM biasing for each case.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.2
• /
• pp.70-80
• /
• 2008

CSMA(Carrier Sense Multiple Access) is a media access control protocol when nodes use a shared channel. To reduce the probability of collision and increase the performance, the station lust checks the state of the channel. In this paper, we study the performance improvement method based on p-persistent strategy. The p-persistent method reduces the chance of collision and improves the efficiency. However, a probability p and the number of station affect the performance. This paper proposes a dynamic CSMA multiple access based on the network status. If the possibility of collision is low, the station increases the probability p to improve the performance. In the opposite case, the station decreases the probability p. Our simulation results show that the proposed scheme outperforms any methods of CSMA multiple access according to the current persistent strategy.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.147-153
• /
• 1990

This paper treats modeling of dynamic load characteristics for power for systems. The dynamic load is represented as 4th order multivariable ARMA model under the assumption that the dynamic load characteristics can be described by the dynamics of only one induction motor. The parameters of the proposed ARMA model are identified using the well-known RLS method. This paper presents two kind of identification results : one is for induction motors and the other is for field data at Donghae station. From these results, the proposed model is quite suitable for the dynamic load characteristics. It has, however, a disadvantage in the viewpoint that the identified parameters are not those of the induction motor.

• International Journal of Reliability and Applications
• /
• v.2 no.1
• /
• pp.27-36
• /
• 2001

This Paper proposes a new methodology for assessing the reliability of an accident management, which Is based on the reliability physics and the scheme to generate dynamic event tree. The methodology consists of 3 main steps: screening; uncertainty propagation; and probability estimation. Sensitivity analysis is used for screening the variables of significance. Latin Hypercube sampling technique and MAAP code are used for uncertainty propagation, and the dynamic event tree generation method is used for the estimation of non-success probability of implementing an accident management strategy. This approach is applied in assessing the non-success probability of implementing a cavity flooding strategy, which is to supply water into the reactor cavity using emergency fire systems during the sequence of station blackout at the reference plant.

• Atmosphere
• /
• v.29 no.4
• /
• pp.429-438
• /
• 2019

Organic carbon (OC) and elemental carbon (EC) in PM_2.5 were measured with Sunset Laboratory Model-5 Semi-Continuous OC/EC Field Analyzer by NIOSH/TOT method at Anmyeondo Global Atmosphere Watch (GAW) Regional Station (37°32'N, 127°19'E) in July and August, 2017. The mean values of OC and EC were 3.7 ㎍ m^-3 and 0.7 ㎍ m^-3, respectively. During the study period, the concentrations of reactive gases and aerosol compositions were evidently lower than those of other seasons. It is mostly due to meteorological setting of the northeast Asia, where the influence of continental outflow is at its minimum during this season under southwesterly wind. While the diurnal variation of OC and EC were not clear, the concentrations of O₃, CO, NOx, EC, and OC were evidently enhanced under easterly wind at night from 20:00 to 8:00. However, the high concentration of EC was observed concurrently with CO and NOx under northerly wind during 20:00~24:00. It indicates the influence of thermal power plant and industrial facilities, which was recognized as a major emission source during KORUS-AQ campaign. The diurnal variations of pollutants clearly showed the influence of land-sea breeze, in which OC showed good correlation between EC and O₃ in seabreeze. It is estimated to be the recirculation of pollutants in land-sea breeze cycle. This study suggests that in general, Anmyeondo station serves well as a background monitoring station. However, the variation in meteorological condition is so dynamic that it is primary factor to determine the concentrations of secondary species as well as primary pollutants at Anmyeondo station.

• Geomechanics and Engineering
• /
• v.36 no.3
• /
• pp.303-316
• /
• 2024

Seismic records are composed of mainshock and a series of aftershocks which often result in the incremental damage to underground structures and bring great challenges to the rescue of post-disaster and the repair of post-earthquake. In this paper, the repetition method was used to construct the mainshock-aftershocks sequence which was used as the input ground motion for the analysis of dynamic time history. Based on the Daikai station, the two-dimensional finite element model of soil-station was established to explore the failure process of station under different seismic precautionary intensities, and the concept of incremental damage of station was introduced to quantitatively analyze the damage condition of structure under the action of mainshock and two aftershocks. An arc rubber bearing was proposed for the shock absorption. With the arc rubber bearing, the mode of the traditional column end connection was changed from "fixed connection" to "hinged joint", and the ductility of the structure was significantly improved. The results show that the damage condition of the subway station is closely related to the magnitude of the mainshock. When the magnitude of the mainshock is low, the incremental damage to the structure caused by the subsequent aftershocks is little. When the magnitude of the mainshock is high, the subsequent aftershocks will cause serious incremental damage to the structure, and may even lead to the collapse of the station. The arc rubber bearing can reduce the damage to the station. The results can offer a reference for the seismic design of subway stations under the action of mainshock-aftershocks.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.5 no.4
• /
• pp.389-400
• /
• 2003

In order to recommend the mechanical smoke exhaust operation mode, Subway Environmental Simulation (SES) is used to predict the airflow of the inlet and outlet tunnel for the subway station. Fire Dynamic Simulation (FDS) is used the SES's velocity boundary conditions to clarity the smoke exhaust effectiveness by the variations with mechnical ventilation system. We compared each 6 types of smoke exhaust systems for the result of smoke density and temperature distributions for 1.5m height from the subway station base in order to clarify the safety evaluation for the heat and smoke exhaust on subway fire.

• Journal of Power Electronics
• /
• v.16 no.4
• /
• pp.1612-1620
• /
• 2016

This paper presents the dynamic excitation control of a siphon-turbine coupled pico-hydro powered cage rotor induction generator and load matching for off-grid electricity generation. Through the proposed dual-role of the current-controlled voltage source converter (VSC), acting as static synchronous compensator and load controller, real and reactive power are dynamically controlled in a decoupled manner with a self supported DC-bus. The proposed scheme entails minimal computation for ensuring the rated (set) capacity of real power. The scheme also exhibits fault immunity for protection, thus enabling the effective handling of constant power electrical loads presented by base telecom station towers in remote locations. The performance of the system is evaluated under MATLAB/Simulink and is experimented through a developed hardware prototype. Simulation and experimental results show close conformity and validate the effectiveness of the proposed scheme.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.1283-1285
• /
• 2007

A wireless sensor network is the combination of a large number of deployed sensors over an area. Communication between the sensors is the most important factor for a successful sensor network. It is mandatory that long distance and multi-hop communication will occur between sensors. Generally sensors relay the sensed data of a particular territory to the command center via a base station. For the non uniformed deployment of sensors many sensors may deploy in hostile areas surrounded by full of obstacles or in other condition it may be out of the direct communication range of the base station. It seems a critical problem for routing data to and from those sensors to the base station. This paper proposes a route management scheme using a dynamic load balancing approach based on residual energy of each agent sensors.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.109-112
• /
• 2006

Recently, when we conducted meteorological observations, complicated land or building around weather station has influenced on the wind distribution. So, we should understand the effect of geometry to get more accurate data. In this study, we analyze the ideal geometry whose shape is hemisphere using CFD method. And then we apply this method to real geometry. And we investigate the velocity at the location of weather station. As the results, we could find out an important relationship between geometry and flow field.