• 터널과지하공간
• /
• 제20권5호
• /
• pp.318-324
• /
• 2010

발파나 지진과 같은 충격하중에 의한 재료의 동적특성이 최근 들어 지상 및 지하구조물의 설계에 주목받고 있다. 측정장비의 발달에 힘입어 수백 ${\mu}$-sec에서 파괴가 진행되는 동안에 발생하는 응력과 변형률의 완전한 이력곡선을 얻을 수 있다. SHPB는 암석의 동적거동을 연구하는데 보편적이며 믿을만한 실험장치로 인식되고 있으며, 이 장치에 의한 동적 압축이나 인장강도시험은 조만간 표준시험법으로 제정될 예정이다. 본 보고서는 종래의 사각형 입사파의 단점을 없애기 위하여 사인형태의 응력파를 생성할 수 있는 특별한 모양의 충격자를 고안한 논문을 소개한 것이다. 이 논문은 사인형태의 입사파에 대한 장점을 설명하고 또한 동하중에 대한 암석의 크기효과를 설명하고 있다.

• 한국항공운항학회:학술대회논문집
• /
• 한국항공운항학회 2006년도 추계학술대회 논문집
• /
• pp.115-119
• /
• 2006

• 한국항공운항학회:학술대회논문집
• /
• 한국항공운항학회 2006년도 추계학술대회 논문집
• /
• pp.124-128
• /
• 2006

• 한국멀티미디어학회논문지
• /
• 제4권3호
• /
• pp.197-204
• /
• 2001

공간 데이타베이스 시스템의 성능을 향상시키기 위해서는 동적 및 정적 환경에서 발생하는 공간객체를 효율적으로 관리할 수 있는 공간색인방법이 필요하다. 그리고 검색의 성능을 높이기 위해서는 공간국부성을 고려한 공간색인 방법이 요구되며, 공간국부성은 객체들의 위치 속성과 관계가 있다. 기존의 공간색인 방법들에서는 객체가 가질 수 있는 순환적인 위치 속성이 고려되지 않았다. 본 논문에서는 순환 및 선형 도메인들로 구성된 검색공간에서 공간적으로 이웃하는 객체들을 결집시키기 위한 공간색인구조인 CR-트리를 소개한다. 그리고 객체의 순환적인 위치 속성을 고려한 공간색인구조를 사용함으로써 적중률 및 버켓이용률을 향상시킬 수 있음을 실험을 통하여 보인다

• 접착 및 계면
• /
• 제6권4호
• /
• pp.12-17
• /
• 2005

Natural fiber/phenolic biocomposites with chopped henequen fibers treated at various levels of electron beam irradiation (EBI) were made by means of a matched-die compression molding method. The interfacial property was explored in terms of interfacial shear strength measured by a single fiber microbonding test. The thermal properties were studied in terms of storage modulus, tan ${\delta}$, thermal expansion and thermal stability measured by dynamic mechanical analysis, thermomechanical analysis and thermogravimetric analysis, respectively. The result showed that the interfacial and thermal properties depend on the treatment level of EBI done to the henequen fiber surfaces. The present result also demonstrates that 10 kGy EBI is most preferable to physically modify the henequen fiber surfaces and then to improve the interfacial property of the biocomposite, supporting earlier results studied with henequen/poly (butylene succinate) and henequen/unsaturated polyester biocomposites.

• Journal of the Korean Wood Science and Technology
• /
• 제36권6호
• /
• pp.1-12
• /
• 2008

주요 국산재의 여러 가지 응용물성을 지난 3년에 걸쳐 조사하였다. 전보(강 외 4인 2008, 변 외 5인 2008)에 이어 본보에서는 우리나라의 활엽수 주요 수종인 백합나무, 거제수나무, 오동나무를 재료로 사용하였다. 매년 동일한 장치와 실험조건으로 실험하였기 때문에 모든 수종에 대한 결과를 상호 비교 할 수 있었다. 수분흡착성 실험은 80메시 목분을 이용하였으며, 넓은 범위의 상대습도조건에 따른 평형 함수율과 흡착등온선을 구하였다. 열전도율과 열확산률은 열선열전도장치를, 전기의 부피저항률과 저 항은 고전기저항계를 이용하여 측정하였다. 정목재와 판목재의 열적 전기적 특성차이가 관찰되었는데 이는 해부학적 차이에 의한 것으로 보인다. 음향적 성질은 음향측정시스템을 사용하여 동적탄성률, 내부마찰을 측정하였다. 본 논문의 결과들은 목재구조물 설계, 휴대용 목재수분계 보정, 음향적 성질 등에 필요한 기본 자료를 제공한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.258-262
• /
• 2007

Satellite launch vehicle is exposed to some dynamic environment during its flight. Particularly, the safety of launch vehicle structure is surely verified under vibration environment in low frequency range. Sine sweep test is generally performed to describe this low frequency vibration environment. Dynamic property of vibration fixture is considered to get the correct property of target object. This vibration fixture should really be an extension of the armature in the form of a very rigid structure that can transfer the required force at the required frequency. An optimum fixture would have its lower natural frequency about 50% higher than the highest required forcing frequency in order to avoid fixture resonances during the test. In this study, the vibration mode analysis considering the mass of target object to design the vibration fixture. And the modal test of vibration fixture is performed to conform the design.

• 펄프종이기술
• /
• 제38권2호
• /
• pp.43-51
• /
• 2006

Starch is widely used as an adhesive material in the paper and corrugated board industry. The adhesion problem of corrugated board is categorized by two main parts called zipper board and white glue line. The object of this research is to investigate the factors affecting the adhesion problem by the gelatinization of various starch solutions and dynamic penetration properties measurements of various commercial base paper and handsheets. Flow property of starch solution is affected by sodium hydroxide addition and reaction level. Absorption property of commercial base papers and handsheets is affected by sizing and stock composition. Optimum bonding between top/bottom liners and corrugated medium is accomplished by acceptable flow viscosity of mixed starch solution and proper adsorption characteristic of base paper.

• 해양환경안전학회지
• /
• 제5권2호
• /
• pp.15-26
• /
• 1999

The marine structures with sea water cooling system always expose to the oceanic atmosphere. Therefore, the protection of the equipments is very important. To investigate the effectiveness of advanced composite materials for the application in offshore environments, the tensile test, hardness test, undercutting property test, permeance test and the friction and wear test were carried out by using various applicable coating materials. The main results obtained can be summarized as follows; 1. The micro-hardness of the Archcoat 502B showed the highest value. 2. The coefficient of friction of the Rigspray coating at the speed of 2.21m/sec showed the lowest value, and that of the Archcoat 502B coating at 1.08m/sec and 0.18m/sec indicated the lowest values. 3. The wear mass at the speed of 0.18m/sec and 1.08m/sec in dry condition showed the smallest values. 4. The Archcoat 502B coating is fitted to the dynamic instruments in the range of low speed and middle speed. Rigspray coating is fitted to the dynamic instruments in the range of high speed. 5. The wear mass of five kinds of coating materials at the range of low speed was very small, and those of the Archcoat S02B, Archcoat 402B and Rigspray coating at high speed range were quitely smaller than those of the Modified Epoxy and Tar Epoxy.

• Smart Structures and Systems
• /
• 제15권4호
• /
• pp.1019-1039
• /
• 2015

Shanghai Tower is a composite structure building with a height of 632 m. In order to verify the structural properties and behaviors in construction and operation, a structural health monitoring project was conducted by Tongji University. The monitoring system includes sensor system, data acquisition system and a monitoring software system. Focusing on the health monitoring in construction, this paper introduced the monitoring parameters in construction, the data acquisition strategy and an integration structural health monitoring (SHM) software. The integration software - Structural Monitoring/ Analysis/ Evaluation System (SMAE) is designed based on integration and modular design idea, which includes on-line data acquisition, finite elements and dynamic property analysis functions. With the integration and modular design idea, this SHM system can realize the data exchange and results comparison from on-site monitoring and FEM effectively. The analysis of the monitoring data collected during the process of construction shows that the system works stably, realize data acquirement and analysis effectively, and also provides measured basis for understanding the structural state of the construction. Meanwhile, references are provided for the future automates construction monitoring and implementation of high-rise building structures.