• Journal of Mechanical Science and Technology
• /
• v.15 no.8
• /
• pp.1143-1155
• /
• 2001

In order to reduce the expensive CPU time for design sensitivity analysis in dynamic response optimization, this study introduces the design sensitivities approximated within estimated confidence radius in dynamic response optimization with ALM method. The confidence radius is estimated by the linear approximation with Hessian of quasi-Newton formula and qualifies the approximate gradient to be validly used during optimization process. In this study, if the design changes between consecutive iterations are within the estimated confidence radius, then the approximate gradients are accepted. Otherwise, the exact gradients are used such as analytical or finite differenced gradients. This hybrid design sensitivity analysis method is embedded in an in-house ALM based dynamic response optimizer, which solves three typical dynamic response optimization problems and one practical design problem for a tracked vehicle suspension system. The optimization results are compared with those of the conventional method that uses only exact gradients throughout optimization process. These comparisons show that the hybrid method is more efficient than the conventional method. Especially, in the tracked vehicle suspension system design, the proposed method yields 14 percent reduction of the total CPU time and the number of analyses than the conventional method, while giving similar optimum values.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1768-1771
• /
• 2003

Hard turning replaces grinding for finishing process with expectations of higher productivity and demanded surface quality. Especially for the surface roughness as surface quality demanded in finishing process of hard turning, know-how of machining characteristics of hardened materials by cutting force analysis should be accumulated in company with achievement of precision of elements and high stiffness design technology in hard turning. Considering chip formation mechanism of hardened materials, adequate cutting conditions are selected for machining experiments and cutting forces are measured according to cutting conditions. Increase of cutting forces especially thrust force and increase of dynamic instability could occur in hard turning. Analysis of dynamic characteristics of the cutting forces is executed to investigate relation between dynamic instability and surface roughness in hard turning. Investigation on effects of relative motion of machining system generated by vibration due to dynamic instability shows that ultimate surface roughness could be predicted considering relative motion of machining system with geometrical surface roughness.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.10
• /
• pp.118-125
• /
• 1999

In the grinding process, generally, the exciting forces with high frequency can be generated due to the wheel wear and the grinding process. As the grinding speed increases, the precise investigation about the wheel dynamic characteristics is required. Conventionally the wheel-spindle has been considered with lumped model in dynamic modeling. With this lumped model, the significant mode resulted from the shell mode of wheel can be readily ignored. This paper suggests the new analysis model which includes the shell mode of wheel in modeling the wheel-spindle assembly. Furthermore, based on the suggested model, the effects of the bolt tightening force and the taper tightening force on the dynamic properties are investigated by the finite element modal analysis and the experimental method. As a result of investigation, the shell mode vibration of wheel affects the dynamic characteristics of the spindle assembly. Also, the vibration modes of the spindle assembly are significantly affected by the joint tightening forces.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.12
• /
• pp.3767-3781
• /
• 1996

Generally, dynamic loads are applied to real structures. Since the analysis with the dynamic load is extremely difficult, static loads are utilized by proper conversions of the dynamic loads. The dynamic loads are usually converted ot static loads by safety foactors of experiences. However, it may increase weight and decrease reliability. In this study, a method is proposed for the conversion process. An equivalent static load is calculated ot generate a same maximum displacement. The method is verified through numerical tests on a spring-mass systems of one and multi degrees-of freedom. It has been found that the duration time of the loads and the natural frequencies of the structures are critical in the conversion process. A road arem is a self-propelled howizer is selected for the application of the proposed method. The shape of the road arm is optimized under the converted static loads.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.8
• /
• pp.11-17
• /
• 2021

This paper describes the time rate of change of dynamic response of a cantilever beam inserted with a damping element, such as bonding, which is excited under a general force at various locations. A sensitivity analysis was performed in a finite element model to show that two types of second-order algebraic governing equations were used to predict the rate of change of dynamic displacement: one is related to the modal coordinate linked to a physical coordinate, and the other to the design parameter of the time rate of change of displacement. The sensitivity differential equation formulation includes more complicated terms compared with that of the undamped cantilever beam. The sensitivities of the dynamic response were observed by changing the location of the excitation force, displacement extraction, and cross-sectional area of the beam. The analytical results obtained by this suggested theory showed a relatively good agreement when compared with those obtained using the commercial finite element program. The suggested analysis procedure enables the prediction of the response sensitivity for any finite element model of the dynamic system.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.2
• /
• pp.34-38
• /
• 2009

Based on the design of the LIS of GuangZhou and BeiJing, this paper discusses the resolution of the LIS with the kernel of process management. It applies the idea of workflow in the management supporting stratum, applies the process-oriented mechanism in the definition, coordination, supervision and control of the management process. The scheme has the character of information-media-oriented, work process dynamic changing supported, application system extended and restructure supported and is independent of the running environment of specific work.. Due to the previous character, the LIS is flexible, useable, elastic and able to support the dynamic application.

• Proceedings of the Technology Innovation Conference
• /
• 1997.07a
• /
• pp.124-159
• /
• 1997

This paper examines a significant example of accumulation of technology in post war Japan - the development process of the videocasstte recorder (VCR) for home use, and the dynamic evolution process of the mass market. The purpose of analyzing the Japanese home VCR industry is to clarify how and why only the Japanese makers had succeeded in developing home VCR and dominated. the global mass market and to make clear the dynamic process of industrial evolution. This study found out the following facts; 1) Japanese inter-firm interactions in the VCR have been carried out by the structure of "the competition and cooperation among the engaged players" form the initial stage, to growing, and maturing stage. 2) The process of competition and cooperation produced the revolutionary innovation through a continuous systematic development process in the R&D phase. 3) The process of competition and cooperation accelerated the speed of technological progress and the rapid growth of the industry in the growing and maturing stage.

• Journal of Korean Association for Spatial Structures
• /
• v.6 no.2 s.20
• /
• pp.69-76
• /
• 2006

Cable dome is one of tension structure which is gradually stabilized by tensioning tables from initially unstable state to finally stable state. This stabilizing process is not able to be developed by general analysis because some cables endure compression forces during stabilizing process. Thus, this paper uses dynamic relaxation method to solve this problem. To apply this stabilizing process analysis to the actual project, this paper deals with cable dome roof of Seoul Olympic Gymnasium. Finally, this paper prove the usefulness of stabilizing process analysis by comparing the analysis results and the measurements.

• Wind and Structures
• /
• v.1 no.2
• /
• pp.161-174
• /
• 1998

Wind forces on structures are usually schematized by the sum of their mean static part and a nil mean fluctuation generally treated as a stationary process randomly varying in space and time. The multi-variate and multi-dimensional nature of such a process requires a considerable quantity of numerical procedures to carry out the dynamic analysis of the structural response. With the aim of drastically reducing the above computational burden, this paper introduces a method by means of which the external fluctuating wind forces on slender structures and structural elements are schematized by an equivalent process identically coherent in space. This process is identified by a power spectral density function, called the Generalized Equivalent Spectrum, whose expression is given in closed form.

• Korean Journal of Culture and Social Issue
• /
• v.14 no.1_spc
• /
• pp.349-365
• /
• 2008

The Reality Dynamic Counseling which reflects Korean culture and Korean sensibilities has been introduced as a model of Korean counseling approach. This is a qualitative study to examine how the characteristics of Reality Dynamic Counseling appear upon the real counseling process for the clients who were physically attacked by their own son and were brought to this counseling export from juvenile counseling service center. The major properties of Reality Dynamic Counseling are grasping the problem with connecting whole context, dealing with an external world as well as an internal world, emphasizing a role in relation with others, serving as a fosterer or an educator for counselor, confronting a client to awake from a disillusion, restoring to the good relationship between a parent and a child, and pulling a client to the relation with people. These properties are well brought out in the real counseling process. The Manual written by a counselor which gives us detailed commentary on counseling process was selected and analyzed in this study because the protocol between a counselor and a client was too large quantity and it could not show on how to change like facial expression and voice.