• 한국도로학회논문집
• /
• 제6권3호
• /
• pp.17-26
• /
• 2004

아스팔트 포장에서 노상층의 상태를 평가하는 방법 중 하나로 현장 CBR(California Bearing Ratio)시험이 이용되고 있다. 그러나 현장 CBR 시험의 경우 시험특성상 시간과 비용이 많이 소모되어 광활한 구간에서의 각 구간별 포장층의 현장강도 특성을 일일이 파악하기란 매우 힘든 단점이 있다. 이에 현장에서 보다 신속하고 경제적으로 포장 지지력을 측정하는 방법으로 동적관입시험 (Dynamic Cone Penetrometer DCP)이 많이 사용되고있다. 이미 외국의 경우 많은 실내 외 시험을 통하여 CBR 값과 DCP 시험을 통한 DCP지수(DCP Index, mm/blow)간의 상관관계가 연구되어 왔으며 최근에 국내에서도 연구가 수행되었으나 실내에 국한된 것이었다. 따라서 본 연구에서는 국내현장에서 사용중인 노상토에 대한 현장 CBR값과 DCP지수에 대한 상관관계를 파악하는 연구를 수행하였다. 이를 통해 국외 자료와 비교하며 국내에서 노상토의 지지력을 평가하기 위한 DCP지수를 제안하고자 하였다. 연구결과, 노상층에서의 CBR 시험방법과 동적관입시험법간 상관관계식을 제시하였으며 국내 노상토의 지지력은 현장CBR값이 20$\sim$45% 범위로 설계시 CBR값을 고려한다면 상당히 우수한 것으로 나타났다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.99-102
• /
• 2008

In terms of operation profiles and building characteristics, Schools, as public facilities, are one of the most suitable buildings for small scale Renewable energy systems since they have its energy demand on daytime mostly and large open area, roof surface available for the installation of Renewable energy systems such as solar collectors or Photovoltaic pannels. This paper presents a methodology of the feasibility test for Renewable energy systems to be intalled at schools. The methodology is based on the analysis of the demand/supply profiles dynamic matching. a case study is also presented to test the applicability of the proposed assessment methodology.

• 한국정밀공학회지
• /
• 제17권5호
• /
• pp.100-107
• /
• 2000

The hydraulic couplings have been widely used in industries, automobile, and power-station drives including ships. A mathematical analysis by which the design and application of hydraulic couplings are made is used in conventional design formulae and general roto-dynamic theories. The fluid flow of hydraulic couplings can be considered to have two component, one circumferentially about the coupling axis, and the other passing fluid from the pump to the turbine in the plane of the coupling axis. Tests have been carried out on the full-scale production coupling. The performance test consists of taking measurement of torque of the fluid coupling for three different amount of working fluid inside with various loads to the output shaft. The purpose of this research is to construct the experimental test equipments and to establish a series of performance test for the domestically developed hydraulic couplings, and to obtain experimental results which can be used to improve the performance of the hydraulic coupling and to solve the practical problems confronted in operation.

• Structural Engineering and Mechanics
• /
• 제28권3호
• /
• pp.335-352
• /
• 2008

Continuous operation of test and measurement is a new operating technique in the petroleum exploitation, which combines perforation with test and measurement effectively. In order to measure the original pressure of stratum layer exactly and prevent testing instrument from being impaired or damaged, a suitable shock absorber is urgently necessary to research. Based on the attempt on the FEM analysis and experiment research, a new shock absorber is designed and discussed in this paper. 3D finite element model is established and simulated accurately by LS-DYNA, the effect and the dynamic character of the shock absorber impact by half sinusoidal pulse force under the main lobe frequency are discussed both on theoretics and experiment. It is shown that the new designed shock absorber system has good capability of shock absorption for the impact load.

• 조명전기설비학회논문지
• /
• 제26권10호
• /
• pp.102-110
• /
• 2012

This paper propose the advanced topology of UPQC, its DC link is connected with Lithium battery, to compensate the momentary interruptions. The proposed system can be operated as UPS mode using the parallel inverter, which control the charge or discharge of battery, in case of the interruption. We dvelop 100kVA UPQC using the proposed topology to rise the power quality and the reliability of Microgrid. We verify its usefulness through voltage compensation test, UPS operation test and etc. using Microgrid test facility.

• 전력전자학회논문지
• /
• 제6권5호
• /
• pp.432-437
• /
• 2001

본 연구는 새로이 개발된 3.3KV 4MW급의 3레벨 NPC구조의 전압형 대용량 인버터에 대한 것으로 Web 기반의 인버터 정보 관리 시스템(Inverter Information Management System)과 가상 운전 시뮬레이터가 부가된 것이다. 사용된 전동기 제어 알고리즘은 속도 센서 없이 동작 가능한 DTC(Direct Torque Control)기법으로 빠른 응답특성을 갖고 있다. IIMS는 운전상태 모니터링 및 Data 관리기능을 가지고 있으며 가상 운전시뮬레이터는 주 전원을 공급하지 않은 상태에서 시스템의 특성 검증 및 Tuning이 가능하다. 현재 이 제품은 신뢰성 검증을 위해 현장 시험 중에 있다.

• 한국정밀공학회지
• /
• 제22권4호
• /
• pp.107-112
• /
• 2005

In this study, the dynamic analysis is performed fur predicting the transmitted force to flexible human body induced by prototype HIF(High Impulsive force) device operation, which is partially assembled by major parts. A beam-mass model and a shear-structure model are used for the flexible mount structure and their dynamic behavior are investigated by experimental results under rigid/flexible mount conditions using a general purpose device. From the test result of prototype device in rigid mount condition, the transmitted force to human body which can not be measured directly, is estimated based on the proved mount structure model.

• Journal of Electrical Engineering and Technology
• /
• 제4권4호
• /
• pp.515-520
• /
• 2009

According to the operating characteristics of pump applications, they should exhibit high efficiency and energy saving capabilities throughout the whole operating process. A novel efficiency optimization control strategy is presented here to meet the high efficiency demand of a variable speed Permanent Magnet Synchronous Motor (PMSM). The core of this strategy is the excellent integration of mended maximum torque to the current control algorithm, based on the losses model during the dynamic and the grade search method with changed step by fuzzy logic during the steady. The performance experiments for the control system of a variable speed high efficiency PMSM have been completed. The test results verified that the system can reliably operate with a different control strategy during dynamic and steady operation, and the system exhibits better performance when using the efficiency-optimization control.

• 오토저널
• /
• 제14권2호
• /
• pp.44-53
• /
• 1992

Automotive transmission is the principle component of vehicle driving system, which transmits the adjusted engine power. The automation of transmission arises from the annoyance of transmission operation such as the frequent stop/start of vehicle and the shifting transients. The study on the optimal shifting condition for the automation of transmission needs the investigation of shifting transients. However, the dynamic modeling theory during transient period is not well-established. In this study, the techniques of dynamic modeling for the power transmission system with Merrite-Wilson gear train are presented. To predict the shifting transients, a driving simulation program is developed, and the results of the analysis are cross-checked in the field test.

• 전기학회논문지P
• /
• 제62권3호
• /
• pp.151-158
• /
• 2013

Large generator of power plant is very important. In order to protect large generator from faults, digital protective relay or IED is required. However, all protective relays for generators of the domestic power plant are operated by foreign products. And now, for technological independence from foreign and improvement of import substitution effect, IEDs using domestic technology are being developed. To evaluate performance of developing next-generation power devices, the study of the dynamic characteristics of the power plant, generator system modeling, fault simulation and analysis, should be considered. Specially, To obtain IEEE Standards COMTRADE format for relay operation test, generator system modeling and fault simulation using PSCAD/EMTDC tools must be preceded. Until now, a complete modeling of generator internal windings and fault simulation techniques dose not exist. In this paper, for evaluation performance of relay elements of developing IED, the generator system modeling and various faults simulation using PSCAD/EMTDC tools were performed. And then, the various transient phenomena through obtained relaying signal of developed modeling were analyzed.