Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Design on a new oil well test shock absorber under impact load

  • Wang, Yuanxun (Huazhong University of Science and Technology) ;
  • Zhang, Peng (Huazhong University of Science and Technology) ;
  • Cui, Zhijian (Huazhong University of Science and Technology) ;
  • Chen, Chuanyao (Huazhong University of Science and Technology)
  • Received : 2006.09.12
  • Accepted : 2007.11.16
  • Published : 2008.02.20
⟨ Previous Next ⟩

Abstract

Continuous operation of test and measurement is a new operating technique in the petroleum exploitation, which combines perforation with test and measurement effectively. In order to measure the original pressure of stratum layer exactly and prevent testing instrument from being impaired or damaged, a suitable shock absorber is urgently necessary to research. Based on the attempt on the FEM analysis and experiment research, a new shock absorber is designed and discussed in this paper. 3D finite element model is established and simulated accurately by LS-DYNA, the effect and the dynamic character of the shock absorber impact by half sinusoidal pulse force under the main lobe frequency are discussed both on theoretics and experiment. It is shown that the new designed shock absorber system has good capability of shock absorption for the impact load.

Keywords

References

  1. Choi, S.B. and Hong, S.R. (2004), "Dynamic modeling and vibration control of electrorheological mounts", J. Vib. Acous., 126(4), 537-541 https://doi.org/10.1115/1.1805006
  2. Desalvo, G.J. and Swanson, J.A. (1994), ANSYS Engineering Analysis System-Theoretical Manual (V5.3), Houston Swanson Analysis, Inc
  3. Fortgang, J. and Singhose, W. (2002), "Concurrent design of input shaping and vibration absorbers", Presented at American Control Conference, Anchorage, Alaska
  4. Gao, W., Chen, J.J., Hu, T.B., etc. (2004), "Optimization of active vibration control for random intelligent truss structures under non-stationary random excitation", Struct. Eng. Mech., 18(2), 137-150 https://doi.org/10.12989/sem.2004.18.2.137
  5. Hartog, J.P.D. (1985), Mechanical Vibrations. New York: Dover Publications, Inc
  6. He, Z.H., Wu, W.Y., Chen, R.Q., etc. (2000), "A new model of damped vibration absorber", J. China Text. Univ. (Eng. Ed.), 17(3), 72-76
  7. Johan, M., Cronjé, P., Stephan Heyns, Nico, J. Theron, etc. (2004), "Development of a variable stiffness spring for adaptive vibration isolators", Proc. of SPIE, 5386, 33-40
  8. John. O. Hallquist (1998), Ls-Dyna Theoretical Manual Livermore Software Technology Corporation
  9. Kevin K. Tseng (2004), "Modeling and simulation of porous lastoviscoplastic material", J. Eng. Mech., 130(5), 547-550 https://doi.org/10.1061/(ASCE)0733-9399(2004)130:5(547)
  10. Kim, J., King, Y.H., Choi, H.H. etc. (2002), "Comparison of implicit and explicit finite-element methods for the hydroforming process of an automobile lower arm", Int. J. Adv. Manufacturing Tech., 20, 407-413 https://doi.org/10.1007/s001700200170
  11. Pennestri, E. (1998), "An application of chebyshev's min-max criterion to the optimal design of a damped dynamic vibration absorber", J. Sound Vib., 217, 757-765 https://doi.org/10.1006/jsvi.1998.1805
  12. Song, M.K., Noh, H.C., Kim, S.H., etc. (2005), "Control of free vibration with piezoelectric materials: Finite element modeling based on timoshenko beam theory", Struct. Eng. Mech., 19(5), 477-501 https://doi.org/10.12989/sem.2005.19.5.477
  13. The DYNAFORM Team, DYNAFORM User's Manual (V5.2), Engineering Technology Associates, Inc. 2004
  14. Vegter, H., Horn, C.H.L.J. ten, etc. (2003), "Characterisation and modeling of the plastic material behaviour and its application in sheet metalforming simulation", Proc. 7th Int. Conf. on Computational Plasticity. Barcelona
  15. Velichkovich, A.S. (2005), "Shock absorber for oil-well sucker-rod pumping unit", Chem. Petroleum Eng., 41(9), 545-546
  16. Yin, J.H., Zhu, J.G. and Graham, J. (2002), "A new elastic viscoplastic model for time-dependent behaviour of normal and overconsolidated clays: Theory and verification", Can. Geotech. J., 39, 157-173 https://doi.org/10.1139/t01-074