• The KIPS Transactions:PartC
• /
• v.13C no.1 s.104
• /
• pp.1-10
• /
• 2006

Ubiquitous computing, a new type of network environment has been generating much interest recently and has been actively studied. In ubiquitous computing, the sensor network which consists of low electric power ad-hoc network-based sensors and sensor nodes, is particularly the most important factor The sensor network serves as the mediator between ubiquitous computing and the actual environment. Related studies are focused on network . management through lightweight hardware using RFID. However, to apply these to actual environment, more practical scenarios as well as more secured studies equipped with secures and efficiency features are needed. Therefore, this study aims to build a wireless network based on PTD for multi users, which provides the largest utility in individual networks, and propose an appropriate management method. The proposed method is designed to enhance security and efficiency related to various services required in wireless networks, based on the reliable peripheral devices for users or pm. using pm, which has been applied to electronic commerce transactions in existing papers, this study also proposed an appropriate management method that is suitable for a dynamic environment and setting a temporary group to provide various services.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.6
• /
• pp.217-221
• /
• 2009

The use of the carbon nanotube (CNT) is superior to the general powder state materials in their thermal and chemical properties. Because its ratio of diameter to length (aspect ratio) is very large, it is known to be a type of ideal nano-reinforcement material. Based on this advantage, the existing carbon black of the semiconductive shield materials used in power cables can acquire excellent properties by the use of a small amount of CNTs. Therefore, we fabricated specimens using a solution mixing method. We investigated the thermal properties of the CNT, such as its storage modulus, loss modulus, and its tan delta using a dynamic mechanical analysis 2980. We found that a high thermal resistance level is demonstrated by using a small amount of CNTs. We also investigated the chemical properties of the CNT, such as the oxidation reaction by using Fourier transform infrared spectroscopy (FT-IR) made by Travel IR. In the case of the FT-IR tests, we searched for some degree of oxidation by detecting the carboxyl group (C=O). The results confirm a tendency for a high cross-linking density in a new network in which the CNTs situated between the carbon black constituent molecules show a bond using similar constructive properties.

• Korean Chemical Engineering Research
• /
• v.45 no.6
• /
• pp.582-590
• /
• 2007

In view of the analysis of the phenomena and the prediction of the performance, mathematical modelling and simulation of a high temperature pilot reactor for water gas shift reaction (WGSR) has been carried out. Multiscale simulation incorporated computational fluid dynamics (CFD) technique, which has the capability to deal with the reactor shape, fluid and energy transport with extensive degree of accuracy, and process modeling technique, which, in turn is responsible for reaction kinetics and mass transport. This research employed multiscale simulation and the results were compared with those from process simulation. From multiscale simulation, the maximum conversion of was predicted approximately 0.85 and the maximum temperature at the reactor was calculated 720 K, resulting from the heat of reaction. Dynamic simulation was also performed for the time transient profile of temperature, conversion, etc. Considering the results, it is concluded that multiscale simulation is a safe and accurate technique to predict reactor behaviors, and consequently will be available for the design of commercial size chemical reactors as well as other commercial unit operations.

• Smart Structures and Systems
• /
• v.17 no.2
• /
• pp.167-194
• /
• 2016

This paper investigates the Synergetics based Damage Detection Method (SDDM) for frame structures by using surface-bonded PZT (Lead Zirconate Titanate) patches. After analyzing the mechanism of pattern recognition from Synergetics, the operating framework with cooperation-competition-update process of SDDM was proposed. First, the dynamic identification equation of structural conditions was established and the adjoint vector (AV) set of original vector (OV) set was obtained by Generalized Inverse Matrix (GIM).Then, the order parameter equation and its evolution process were deduced through the strict mathematics ratiocination. Moreover, in order to complete online structural condition update feature, the iterative update algorithm was presented. Subsequently, the pathway in which SDDM was realized through the modified Synergetic Neural Network (SNN) was introduced and its assessment indices were confirmed. Finally, the experimental platform with a two-story frame structure was set up. The performances of the proposed methodology were tested for damage identifications by loosening various screw nuts group scenarios. The experiments were conducted in different damage degrees, the disturbance environment and the noisy environment, respectively. The results show the feasibility of SDDM using piezoceramic sensors and actuators, and demonstrate a strong ability of anti-disturbance and anti-noise in frame structure applications. This proposed approach can be extended to the similar structures for damage identification.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.3
• /
• pp.153-159
• /
• 1989

This paper describes the algorithms employed in the preprocessing stage of the timing simulator, TSIM1.0, which is based on the Waveform Relaxation Method (WRM) at the CELL-level. The preprocessing stage in TSIM1.0 (1)partitions a given circuit into DC connected blocks (DCB's) (2) forms strongly connected circuts (SCC's) and (3) orders CELL's Also, the efficient waveform management technique for the WRM is described, which allows the overwriting of the waveform management technique for the WRM is described. which allows the overwriting of the waveform information to save the storage requirements. With TSIM1.0, circuits containing up to 5000 MOSFET's can be analyzed within 1 hour computation time on the IBM PC/AT. The simulation results for several types of MOS digital circuits are given to verify the performance of TSIM1.0.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.21 no.5
• /
• pp.245-254
• /
• 2017

The building which are essential for disaster recovery is classified as a special seismic use group. Especially, achievement of seismic performance is very important for the hospital, so the hospital should be able to maintain its function during and right after an earthquake without significant damage on both structural and non-structural elements. Therefore, this study aimed at checking the seismic performance of a hospital building, but which was limited to structural elements. For the goal, a plan with a configuration of general hospitals in Korea was selected and designed by two different seismic-force-resisting systems. In analytical modeling, the shear behavior of the wall was represented by three inelastic properties as well as elastic. Nonlinear dynamic analyses were conducted to evaluate the performance of structural members. The result showed that the performance of shear walls in the hospital buildings was not satisfied regardless of the seismic-force-resisting systems, while the demands on the beams and columns did not exceed the capacities. This is the result of only considering the shear of the wall as the force-controlled action. When the shear of the wall was modeled as inelastic, the walls were yielded in shear, and as the result, the demands for frames were increased. However, the increase did not exceed the capacities of the frames members. Consequently, since the performance of walls is significant to determine the seismic performance of a hospital building, it will be essential to establish a definite method of modeling shear behavior of walls and judging their performance.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.558-564
• /
• 2013

A simple and effective method is introduced to synthesize a series of polystyrene-b-poly(oligo(ethylene oxide) monomethyl ether methacrylate)-b-polystyrene (PSt-b-POEOMA-b-PSt) triblock copolymers. The structures of PSt-b-POEOMA-b-PSt copolymers were characterized by Fourier-transform infrared spectroscopy (FTIR) and nuclear magnetic resonance ($^1H$ NMR) spectroscopy. The molecular weight and molecular weight distribution of the copolymer were measured by gel permeation chromatography (GPC). Furthermore, the self-assembling and drug-loaded behaviours of three different ratios of PSt-b-POEOMA-b-PSt were studied. These copolymers could readily self-assemble into micelles in aqueous solution. The vitamin E-loaded copolymer micelles were produced by the dialysis method. The micelle size and core-shell structure of the block copolymer micelles and the drug-loaded micelles were confirmed by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The thermal properties of the copolymer micelles before and after drug-loaded were investigated by different scanning calorimetry (DSC). The results show that the micelle size is slightly increased with increasing the content of hydrophobic segments and the micelles are still core-shell spherical structures after drug-loaded. Moreover, the glass transition temperature (Tg) of polystyrene is reduced after the drug loaded. The drug loading content (DLC) of the copolymer micelles is 70%-80% by ultraviolet (UV) photolithography analysis. These properties indicate the micelles self-assembled from PSt-b-POEOMA-b-PSt copolymers would have potential as carriers for the encapsulation of hydrophobic drugs.

• The Research Journal of the Costume Culture
• /
• v.18 no.4
• /
• pp.626-639
• /
• 2010

The club culture is not something unified. Rather, it is a group of subcultures which share intertwined areas. And it keeps its own dress code, dance style, music genre along with series of authoritarian and unlawful rituals. For young adults, a club is a new cultural space to enjoy in reasonable price and they can express themselves without thinking much about others. A club creates its unique mass culture by producing continuously changing and experimental fashion styles. As the club culture’s influence becomes powerful, the club market was established and experimental fashion styles are wide spread among general public, young adults who try to express their unique characters and even fashion-leading industry. The study results are as follows. First, dance club and its derivative, rave is symbolic axles and the center of social activity. They are also defined as culture which is related to specific space that continues to present and change sound and style. Second, the definition of clubber in a dictionary is club member or a person who is united with others. Third, based upon clubbers' fashion styles in Hongdae and Kang-nam areas, there are 5 different images including sexy casual, lingerie, dynamic, chic style and feminine style. Fourth, based upon case study above, to take unique life style of fashionista that leads fashion with trendy fashion style into account, we suggested five designs which are unique, sensitive and trendy. Fifth, through analyzing clubber generation and design factors of clubbers' fashion style combined with various trend, unique brand was developed to meet the demands of clubbers who want differentiated images and leading styles.

• Korean Journal of Materials Research
• /
• v.25 no.8
• /
• pp.370-375
• /
• 2015

In this study, to confirm the effect of alloying elements on the phase transformation and conditions of the friction stir process, we processed two materials, SS400 and SM45C steels, by a friction stir process (FSP) under various conditions. We analyzed the mechanical properties and microstructure of the friction stir processed zone of SS400 and SM45C steels processed under 400RPM - 100mm/min conditions. We detected no macro (tunnel defect) or micro (void, micro crack) defects in the specimens. The grain refinement in the specimens occurred by dynamic recrystallization and stirring. The microstructure at the friction stir processed zone of the SS400 specimen consisted of an ${\alpha}$-phase. On the other hand, the microstructure at the friction stir processed zone of the SM45 specimen consisted of an ${\alpha}$-phase, $Fe_3C$ and martensite due to a high cooling rate and high carbon content. Furthermore, the hardness and impact absorption energy of the friction stir processed zone were higher than those of base metals. The hardness and impact absorption energy of FSPed SM45C were higher than that of FSPed SS400. Our results confirmed the effect of alloying elements on the phase transformation and mechanical properties of the friction stir processed zone.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.2
• /
• pp.131-137
• /
• 2006

In swarm robot systems, each robot must behaves by itself according to the its states and environments, and if necessary, must cooperates with other robots in order to carry out a given task. Therefore it is essential that each robot has both learning and evolution ability to adapt the dynamic environments. In this paper, the new learning and evolution method based on reinforcement learning having delayed reward ability and distributed genetic algorithms is proposed for behavior learning and evolution of collective autonomous mobile robots. Reinforcement learning having delayed reward is still useful even though when there is no immediate reward. And by distributed genetic algorithm exchanging the chromosome acquired under different environments by communication each robot can improve its behavior ability. Specially, in order to improve the performance of evolution, selective crossover using the characteristic of reinforcement learning is adopted in this paper. we verify the effectiveness of the proposed method by applying it to cooperative search problem.