• 신재생에너지
• /
• 제9권2호
• /
• pp.51-57
• /
• 2013

The Grid code is being strengthen as increase of renewable energy ratio. Especially, the grid connection regulations are continuously being updated for stable operation of power grids. Static grid support and Dynamic grid support must make an accurate measure at Grid connected point because they needs control algorithm individually. It has to exactly measure voltage including switching ripple at the output of the inverter generating system. In addition, it is necessary to have an accurate voltage measurement when the situation rapidly changing the grid impedance is caused by the input of serial impedance of transformer and line impedance as well as Grid Fault Device. In this paper, We propose a new detection method of grid voltage to calculate accurately the r.m.s voltage of the grid connection point along the standard required by the low voltage regulation. We verified performance through simulation grid fault device.

• 한국시뮬레이션학회논문지
• /
• 제12권4호
• /
• pp.51-59
• /
• 2003

Real-Time applications on Grid environment have several problems in terms of resource management addressed as follows; (1) dynamic resource allocation to provide QoS objectives, (2) heterogeneous resources that is different scale, or capacity in same unit, and (3) resource availability, and resource needs. This paper describes the techniques of resource manager (RM) handling above problems to support QoS of dynamic real-time applications on Grid. The contributions of this paper to solve problems are as follows: unification of dynamic resource requirements among heterogeneous hosts, control of resources in heterogeneous environments, and dynamic load balancing/sharing. Our heuristic allocation scheme works not only 257% better than random, 142% better than round robin, and 36.4% better than least load in QoS sensitivity, but also 38.6% better than random, 28.5% better than round robin, and 31.6% better than least load in QoS.

• 전기학회논문지
• /
• 제56권2호
• /
• pp.317-324
• /
• 2007

Most conventional hybrid systems using renewable energy sources have been applied for stand-alone operation, but Utility-interface may be an useful and viable option for hybrid systems. Grid-connected operation may have benefits such as reduced losses in power system distribution, utility support in demand side management, and peak load shaving. This paper addresses power control and dynamic performance of a grid-connected PV/wind/BESS hybrid system. At all times the PV way and the wind turbine are individually controlled to generate the maximum energy from given weather conditions. The battery energy storage system (BESS) charges or discharges the battery depending on energy gap between grid invertger generation and production from the PV and wind system. The BESS should be also controlled without too frequently repeated shifts in operation mode, charging or discharging. The grid inverter regulates the generated power injection into the grid. Different control schemes of the grid inverter are presented for different operation modes, which include normal operation, power dispatching, and power smoothing. Simulation results demonstrate that the effectiveness of the proposed power control schemes for the grid-interactive hybrid system.

• ETRI Journal
• /
• 제38권6호
• /
• pp.1197-1206
• /
• 2016

Performing continuous skyline queries of dynamic data sets is now more challenging as the sizes of data sets increase and as they become more volatile due to the increase in dynamic updates. Although previous work proposed support for such queries, their efficiency was restricted to small data sets or uniformly distributed data sets. In a production database with many concurrent queries, the execution of continuous skyline queries impacts query performance due to update requirements to acquire exclusive locks, possibly blocking other query threads. Thus, the computational costs increase. In order to minimize computational requirements, we propose a method based on a multi-layer grid structure. First, relational data object, elements of an initial data set, are processed to obtain the corresponding multi-layer grid structure and the skyline influence regions over the data. Then, the dynamic data are processed only when they are identified within the skyline influence regions. Therefore, a large amount of computation can be pruned by adopting the proposed multi-layer grid structure. Using a variety of datasets, the performance evaluation confirms the efficiency of the proposed method.

• 정보처리학회논문지A
• /
• 제15A권3호
• /
• pp.151-154
• /
• 2008

서비스 이동과 자원 상태 변화 등 실행 환경 변화가 빈번히 발생하는 그리드 컴퓨팅 환경은 다양한 응용 프로그램 작업 환경을 지원하고 사용자에게 끊임없는 작업 환경을 보장하기 위하여 고가용성을 지원하는 미들웨어가 필수적으로 필요하다. 기존의 분산 환경 미들웨어 역시 고가용성 지원 서비스가 일부 연구자에 의해 진행되고 있으나 공개표준은 아니며 다양한 그리드 서비스에 대한 고려가 없다. 본 논문에서는 환경에 따라 적응하는 서비스 미들웨어 런타임 서비스 관리 시스템을 통해 자율적으로 작업 환경을 재구성하도록 하여 미들웨어의 가용성을 증대시키고 안정적으로 서비스의 계속성과 데이터 및 자료의 일관성을 보장하는 방법을 제시하고 프로토타입 Wapee(Web-Service based Application Execution Environment)를 통해 실제 환경에서 적용 가능성을 확인한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.911-916
• /
• 2012

It is important to identify dynamic characteristics of nuclear fuel components. Since the fuel always exposed to turbulent flow, the dynamic contact between grids and rods is one of the fuel failure modes. The dynamic behavior of grids in nuclear fuels is quite complex, since two pairs of spring support are placed in the limited space. The strap in a cell has single spring and double dimples and this paper focuses on investigation of the grid strap(Test Fuel Strap, TFS) vibration in one cell. To identify the grid strap vibration, modal analysis of the strap is performed using Finite Element Method (FEM). Modal testing on a $5{\times}5$ grid structure without rods is performed. The modal testing results are compared to analytic results. In addition, random test considering rod effect is performed about a $5{\times}5$ grid with rods under real contact condition in the air. Finally, the strap vibration of a $5{\times}5$ fuel bundle in INvestigation of Flow INduced vIbraTion(INFINIT) facility is measured in real fluid velocity condition without heating. It is shown that modal frequencies from the test are almost equal to those peak frequencies in the INFINIT test.

• Nuclear Engineering and Technology
• /
• 제24권2호
• /
• pp.111-120
• /
• 1992

본 논문은 안전정지지진에 대한 spacer grid충격하중의 동적특성을 고찰한 것이다. 안전정지지 진 (SSE： Safe Shutodown Earthquake)을 가진력으로 사용하였고 모델로는 가장 긴 15 row의 핵연료집합체 모델을 사용하였다. 외부에서 제공되는 입력데이타의 불확실성을 보상하기 위하여 흔히 사용되는 10%증가된 입력값과, NRC 권고사항인 입력응답스펙트럼의 이동효과의 영향이 평가되었다. 평가대상으로는 spacer grid의 충격력이 사용되었다. 해석결과로서 입력응답 스펙트럼의 이동효과의 영향은 거의 무시할 수 있으나 증가된 입력값의 영향은 spacer grid의 충격력에 큰 영향을 줌을 알 수 있었다. 따라서 원자로노심의 동적응답을 위해서는 입력응답 스펙트럼을 이동시키면서 해석할 필요가 없음을 확인하였다.

• 한국소음진동공학회논문집
• /
• 제22권7호
• /
• pp.619-625
• /
• 2012

Since the fuel is always exposed to turbulent flow, the grid strap shows flow induced vibration characteristics that impact on the nuclear fuel soundness. The dynamic behavior of grids in nuclear fuels is quite complex, since two pairs of spring and dimple support are contacted with rods by friction in the limited space. This paper focuses on investigation of the grid strap(test fuel strap, TFS) vibration in one cell. TFS consists of a single spring and double dimples. To identify the grid strap vibration, modal analysis of the strap is performed using finite element method(FEM). Modal testing on a $5{\times}5$ grid structure without rods is performed. The modal testing results are compared to analytic results. In addition, random test considering rod effect is performed about a $5{\times}5$ grid with rods under real contact condition in the air. Finally, the strap vibration of a $5{\times}5$ fuel bundle in investigation of flow induced vibration(INFINIT) facility is measured in real fluid velocity condition without heating. It is shown that modal frequencies from the test are almost equal to those peak frequencies in the INFINIT test.

• 한국멀티미디어학회논문지
• /
• 제12권9호
• /
• pp.1191-1200
• /
• 2009

그리드 데이터 베이스에서 복제본 데이터는 응용 서비스 제공을 위한 기반 정보로서 활용되며, 응용 서비스의 종류, 정보의 특성에 따라 각각의 복제본에 대한 접근 빈도에 차이가 발생한다. 특히 많은 노드에 복제본이 저장됨으로 인해 그리드 컴퓨팅 환경에서의 각각의 복제본을 관리하는 연구가 계속 되고 있다. 그의 일환으로 접근 빈도를 기반으로 한 데이터 갱신 기법이 있으며, 복제본 노드의 접근 빈도를 기반으로 데이터를 갱신한다. 하지만 동적인 접근에 대한 고려가 부족하여 그리드 환경에는 부적합하다. 따라서 본 논문에서는 갱신 정보를 관리하기 위한 동적 접근 빈도 트리를 이용한 갱신 기법을 제안한다. 동적 접근 빈도 트리는 접근 빈도를 통하여 미리 각 노드를 그룹단위로 묶어 트리를 구축하며, 또한 트리의 불균형으로 인하여 성능이 저하되는 것을 방지한다. 제안 기법은 성능평가를 통해 빠른 갱신을 보임으로써 기존의 기법에 비하여 향상된 성능을 보인다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2542-2547
• /
• 2005

In this paper, we propose a support vector machine (SVM) hyper and kernel parameter optimization method which is based on minimizing radius/margin bound which is a kind of estimation of leave-one-error. This method uses dynamic encoding algorithm for search (DEAS) and gradient information for better optimization performance. DEAS is a recently proposed optimization algorithm which is based on variable length binary encoding method. This method has less computation time than genetic algorithm (GA) based and grid search based methods and better performance on finding global optimal value than gradient based methods. It is very efficient in practical applications. Hand-written letter data of MNI steel are used to evaluate the performance.