• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.330-335
• /
• 2003

Analysis and experiment on dynamic characteristics of automotive roof have been carried out experimentally and numerically to design a lightweight roof. Finite element analysis of a conventional steel automotive roof was verified by experiments on vibration characteristics. The dynamic analysis of carbon fiber reinforced composite automotive roof shows that the roof stiffness changes as the fiber orientation of the laminated panel changes. Optimization results yielded a composite roof, which was 52% lighter, than the steel conventional steel automotive roof. This paper addresses a design strategy of composite roof for weight reduction.

• 한국기계가공학회지
• /
• 제8권3호
• /
• pp.98-104
• /
• 2009

The objective of this paper is to investigate the effect of factors on the dynamic stiffness variation of boring bar. The experiment was carried out by Taguchi Method and Orthogonal array table. The results indicate that overhang was found out to be dominant factor with 95% confident intervals and feed rate and depth of cut were insignificant. In addition, analysis of loss function shows that loss value increased sharply from 3D to 4D(D is a shank diameter). Consequently, there is critical point which changes property of dynamic stiffness.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.117-119
• /
• 2013

Combustion stability margin of a model gas turbine has been assessed by utilizing damping ratios of measured dynamic pressure data. It is known that acoustic oscillations in combustion chambers can be described as a superposition of nonlinearly interacting oscillators. Based on this theoretical background, CSMA (Combustion Stability Margin Assessment) code has been developed. The code has been employed into a model gas turbine combustion experiment, focused on the combustion instability, to show its capability to determine the damping ratio of measured dynamic pressure and further to assess combustion stability margin of the experiment, and turned out that the code works well.

• PNF and Movement
• /
• 제22권2호
• /
• pp.267-274
• /
• 2024

Purpose: The purpose of this study was to determine the effects of functional insole application using a hallux point on dynamic balance. Methods: Twenty-nine participated in this study. The experiment investigated changes in dynamic balance with the use of a functional insole that emphasized the hallux point. After explaining the experiment to the subjects, the Y-balance test was conducted to measure dynamic balance before the insole was applied. The test was then repeated after the functional insole with the hallux point was. Paired t-tests were used to analyze the statistical differences before and after the application of the functional insole with the hallux point. Results: The functional insole that emphasizes the hallux point significantly increased the distance in the anterior (p<0.05), posteromedial (p<0.05), posterolateral (p<0.05) directions as well as the composite score measured by the Y-balance test compared to before the insole application. Conclusion: The use of a functional insole that emphasizes the hallux point can help the foot pronate during dynamic balance, thereby improving balance through the control of the sole.

• Geomechanics and Engineering
• /
• 제36권4호
• /
• pp.391-406
• /
• 2024

In order to study the soil seasonal dynamic characteristics in the regions with four distinct seasons, the soil dynamic triaxial experiments were conducted by considering the environmental temperature range from -30℃ to 30℃. The results demonstrate that the dynamic soil properties in four seasons can change greatly. Firstly, the dynamic triaxial experiments were performed to obtain the dynamic stress-strain curve, elastic modulus, and damping ratio of soil, under different confining pressures and temperatures. Then, the experiments also obtain the dynamic cohesion and internal friction angle of the clay under the initial strain, and the changing rule was summarized. Finally, the results show that the dynamic elastic modulus and dynamic cohesion will increase significantly when the clay is frozen; as the temperature continues to decrease, this increasing trend will gradually slow down, and the dynamic damping ratio will go down when the freezing temperature decreases. In this paper, the change mechanism is objectively analyzed, which verifies the reliability of the conclusions obtained from the experiment.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 가을 학술발표회논문집
• /
• pp.349-354
• /
• 2000

The modal analysis based on deformations is the method to drived dynamic responsed from superposition of natural frequency and mode shape. In order to free vibration analysis of the structures, Aluminum-made model is used in experiment. The dynamic characteristic of the structures are determined from acceleration measurements using impulse hammer. Experimenrt input and output signal are derive from impact hammer and the one accerometer. This paper present three methods for calculating the natural frequencies and mode shapes of the structure with theory value and finite element analysis, experiment. The results were good approximated about natural frequency and mode shape.

• 대한수학교육학회지:학교수학
• /
• 제1권2호
• /
• pp.513-528
• /
• 1999

The primary purpose of the constructivist teaching experiment is to experience and construct models of students' mathematical teaming and reasoning. The constraints the teacher experience in teaching experiment constitute a basis for understanding students' mathematics. The constructivist teaching experiment that includes a dynamic interaction process between teacher and students and between students and students, is the most hopeful research method in mathematics education. In this paper, I introduced the constructivist teaching experiment and showed several examples of applications that were used in the previous research.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.565-570
• /
• 2001

Base shear and roof drift relation was acquired from experiment of 3 story ordinary moment resisting frame which was designed using gravity loads. To evaluate the dynamic behavior of the frame, analytical model was generated from experimental result. Dynamic analysis was performed using the analytical model subjected to earthquake ground motions with 500, 1000, and 2400 years of return period. And capacity spectrum method was adopted to find the performance points of the frame. Both dynamic analysis and CSM showed that the performance of the frame meet the life safety objectives suggested by FEMA 273 and ATC 40.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.89-91
• /
• 2006

This paper presents dynamic characteristic of Permanment Magnet Linear Synchronous Motor(PMLSM). In order to analyze dynamic characteristics, simulink of Matlab is used. The measuring system of dynamic characteristics is manufactured and experiment results are compared with simulation results.

• The Journal of Korean Physical Therapy
• /
• 제33권5호
• /
• pp.224-230
• /
• 2021

Purpose: The purpose of this study was to investigate the effects of the fascia distortion model (FDM), one of the fascia treatments, on unstable ankle subjects. This was done through the chronic ankle instability tool (CAIT) questionnaire on maximum isometric muscle strength, proprioception, dynamic balance, and maximum angle. Methods: An experiment was conducted using the chronic ankle instability tool questionnaire on males and females in their twenties who suffered from ankle instability. Before the experiment, maximum isometric strength, proprioceptive, dynamic balance, and maximum angle were measured. The fascia distortion model was applied and then measurements were taken again to compare and analyze the changes. Analysis was carried out using the paired t-test. Results: After applying the fascia distortion model, maximum isometric strength, proprioceptive, dynamic balance, and maximum angle significantly improved (p<0.05). Conclusion: This study found that the fascia distortion model method was effective in improving maximum isometric strength, proprioceptive, dynamic balance, and maximum angle. The results suggest that the fascia distortion model method is a new intervention that could be used for subjects with chronic ankle instability.