• 제목/요약/키워드: Dynamic Elasticity

검색결과 418건 처리시간 0.026초

양생조건(養生條件)이 인공경량골재(人工輕量骨材)콘크리트의 알카리-실리카 반응(反應)에 미치는 영향(影響) (Effect of Curing Conditions on the Alkali-Silica Reaction of Synthetic Lightweight Aggregate Concrete)

  • 김성완;성찬용
    • 농업과학연구
    • /
    • 제18권2호
    • /
    • pp.140-147
    • /
    • 1991
  • 이 논문(論文)은 양생조건(養生條件)에 따른 알카리 실리카 반응(反應)이 인공경량골재 콘크리트의 공학적(工學的) 성질(性質)에 미치는 영향에 관한 것으로서, 이 연구(硏究)에 의하여 얻어진 결과(結果)를 요약(要約)하면 다음과 같다. 1 각 콘크리트의 팽창은 재령이 증가함에 따라 증가하였으며, 재령 90일에서 Type A, B, C 및 D 콘크리트의 팽창율은 각각 0.173%, 0.575%, 0.230% 및 0.680%로 되었다. 특히, Type D는 Type A 콘크리트 보다 3.93 배(倍)의 팽창율을 보였고, 팽창이 증가함에 따라 균열폭도 증가되었으며 팽창율 0.680%에서 균열의 최대폭은 0.5 mm를 나타냈다. 2. 각 콘크리트의 동탄성 계수는 재령이 증가할수록 증가하여, 재령 30일에서 최대치를 나타냈고, 그 이후부터는 점차 감소하였다. 또한, 재령 90일에서 Type A, B, C 및 D 콘크리트의 동탄성 계수 손실율은 각각 24.3%, 33.7%, 28.1% 및 37.0% 로 되었으며, Type D는 Type A 콘크리트 보다 1.52 배(倍)의 손실율을 보였다. 3. 각 콘크리트의 초음파 진동속도는 재령이 증가할수록 증가하여 재령 30일에서 최대치를 나타냈고, 그 이후부터는 점차 감소하였다. 또한, 재령 90일에서 Type A, B, C 및 D 콘크리트의 초음파 진동속도 손실율은 각각 6.4%, 8.7%, 8.5% 및 14.2% 증가하였으며, 손실율은 Type D가 Type A 콘크리트 보다 2.21 배(倍) 크게 나타났다. 4. 동탄성 계수와 초음파 진동속도와의 상관관계(相關關係)는 고도(高度)의 유의성이 인정되었으며, 동탄성 계수는 초음파 진동속도가 증가할수록 증가되었고, 감소할수록 감소하였다. 또한, 동탄성 계수의 감소율은 각 재령에서 초음파 진동속도 감소율 보다 2-7배 이상 크게 나타났다. 5 동탄성 계수와 초음파 진동속도는 팽창이 증가함에 따라 감소하였고, 그 감소율은 재령이 증가함에 따라 증가되었으며, 팽창의 증가율은 동탄성 계수와 초음파 진동속도의 감소율 보다 더 크게 나타났다.

  • PDF

국산(國産) 가설재용(假說材用) 합판(合板)의 옥외(屋外) 내구성(耐久性) 평가(評價) (Evaluation of Exterior Durability of Domestic Plywood for Temporary Construction)

  • 김규혁;조재성;송기영
    • Journal of the Korean Wood Science and Technology
    • /
    • 제22권1호
    • /
    • pp.20-27
    • /
    • 1994
  • Water repellent preservative (WRP) treated and untreated, small-sized specimens prepared from semiwater resistant, water resistant, and tegofilm-overlaid plywood were exposed to outdoor weathering for one year. Exterior durability of specimens was evaluated on the basis of changes in dynamic modulus of elasticity, degree of delamination, modulus of elasticity, modulus of rupture, and glueline shear strength. Among untreated specimens, tegofilm-overlaid plywood showed the best outdoor durability, and durability between semiwater resistant and water resistant plywood was similar. Although WRP treatment increased the durability of all types of plywoods, the effect of treatment on the increase in durability for semi water resistant plywood was not distinct. Accordingly, it can be concluded that semi water resistant plywood, which is used for temporary construction such as concrete formwork in our country, can not be inadequate for exterior use, regardless of WRP treatment. The bending strength and glueline shear strength of untreated water resistant plywood measured after weathering for one year did not exceed the minimum value specified by Korean Standard (KS), thereby the outdoor use of water resistant plywood was not desirable without WRP treatment. Exterior durability between treated water resistant plywood and untreated tegofilm-overlaid plywood was very similar. This result suggests that if an exposed plywood surface is treated with WRP regularly water resistant plywood can be used for temporary construction. This suggestion, however, needs to be investigated. In summary, semiwater resistant plywood cannot be used for temporay construction regardless of WRP treatment. Water resistant plywood can be used only with WRP treatment. Comparing the cost of tegofilm-overlaid plywood to costs of water resistant plywood and WRP treatment, however, it can be concluded that use of tegofilm-overlaid plywood for temporay constrution is strongly suggested from the point of view of both outdoor durability and costs.

  • PDF

밀도변화가 직교이방성함수구배재료에서 전파하는 모드 III 균열선단의 응력 및 변위장에 미치는 영향 (Influence of Density Variation on Stress and Displacement Fields at a Propagating Mode-III Crack Tip in Orthotropic Functionally Graded Materials)

  • 이광호
    • 대한기계학회논문집A
    • /
    • 제35권9호
    • /
    • pp.1051-1061
    • /
    • 2011
  • 밀도의 변화가 직교이방성 함수구배재료에서 전파하는 모드 III 균열선단부근의 응력 및 변위장에 미치는 영향에 대하여 연구하였다. 본 연구에서 균열은 물성치의 구배방향과 수직하여 전파하며 다음과 같은 3가지 종류의 함수구배재료에서 밀도변화가 균열선단의 응력장 및 변위장에 미치는 영향에 대하여 연구하였다. (1) 탄성변화 없이 밀도만 변화하는 경우 (2) 밀도의 변화방향과 탄성변화방향이 서로 반대인 경우 (3) 밀도의 변화방향과 탄성변화방향이 동일한 경우이다. 이와 같은 경우에 대한 연구를 위하여 균열의 응력장 및 변위장이 개발되었으며 또한 전파하는 균열에 대한 동적응력확대계수에 대하여도 연구하였다. 균열전파속도가 느린 경우에는 밀도의 변화가 균열선단부근의 응력 및 변위장에 미치는 영향은 미미하나 균열전파속도가 빠른 경우에는 그 영향은 매우 크다.

해양환경에 폭로된 콘크리트 실험체의 역학적 특성 (The Characteristics of Strength of Concrete Specimens under Tidal Environment)

  • 이준구;김명원;김관호;조재용;김한중
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
    • /
    • pp.277-278
    • /
    • 2009
  • The building that supply tidal and splash zone was constructed near Seamangeum Gate Bridge. The specimens that will be tested for maintenance of gate bridge were exposed on the tidal and splash zone, totally about 650(Fig. 1). The characteristics of strength, salt penetration profile, field application of surface repair material and section recover material will be acquired by periodical test. The program was developed to obtain optimal maintenance strategy of gate bridge as a marine concrete structure and to deposit experimental data, lab. test result, field test result, on its D/B. On this paper, we hope to introduce two years exposure data as compressive strength, the modulus of elasticity, the modulus of dynamic elasticity, field adoption of repair and recover materials. As briefly speaking the results, possion's ratio, elasticity, strength was general, but the recover materials have some problems. There was crack between concrete and recover material and delamination figures.

  • PDF

Use of Markov Chain Monte Carlo in Estimating the Economy Model

  • Lee, Seung Moon
    • 통합자연과학논문집
    • /
    • 제1권2호
    • /
    • pp.127-132
    • /
    • 2008
  • This project follows the heterogeneous agent market segmented model of Landon-Lane and Occhino (2007) with using Korean data, M1 and GDP deflator from 1882:I to 2007:II. This paper estimates parameters with Monte Carlo Markov Chain. The fraction of traders, ${\lambda}$, in Korea is 15.64%. The quarterly preferences discount factor's, ${\beta}$, posterior mean is 0.9922. The posterior mean of the inverse of the elasticity of the labor supply to the real wage, ${\varphi}$, is 0.0316. The elasticity of the labor supply to the real wage has a very large value. By Hansen (1985) and Christiano and Eichenbaum (1992) and Cooley and Hansen (1989), models having large elasticity of the aggregate labor supply better match macroeconomic data.

  • PDF

Size dependent torsional vibration of a rotationally restrained circular FG nanorod via strain gradient nonlocal elasticity

  • Busra Uzun;Omer Civalek;M. Ozgur Yayli
    • Advances in nano research
    • /
    • 제16권2호
    • /
    • pp.175-186
    • /
    • 2024
  • Dynamical behaviors of one-dimensional (1D) nano-sized structures are of great importance in nanotechnology applications. Therefore, the torsional dynamic response of functionally graded nanorods which could be used to model the nano electromechanical systems or micro electromechanical systems with torsional motion about the center of twist is examined based on the theory of strain gradient nonlocal elasticity in this work. The mathematical background is constructed based on both strain gradient theory and Eringen's nonlocal elasticity theory. The equation of motions and boundary conditions of radially functionally graded nanorods are derived using Hamilton's principle and then transformed into the eigenvalue analysis by using Fourier sine series. A general coefficient matrix is obtained to assemble the Stokes' transformation. The case of a restrained functionally graded nanorod embedded in two elastic springs against torsional rotation is then deeply investigated. The effect of changing the functionally graded index, the stiffness of elastic boundary conditions, the length scale parameter and nonlocal parameter are investigated in detail.

투수용 폴리머 콘크리트의 역학적 특성에 관한 실험적 연구 (An Experimental Study on the Mechanical Properties of Permeable Polymer Concrete)

  • 성찬용
    • 한국농공학회지
    • /
    • 제38권5호
    • /
    • pp.95-105
    • /
    • 1996
  • This study was performed to evaluate the mechanical properties of permeable polymer concrete using fillers and unsaturated polyester resin. The following conclusions were drawn; 1. The unit weight was in the range of 1, 663~ l, 892kg/$cm^3$, the weights of those concrete were decreased 18~28% than that of the normal cement concrete. 2. The highest strength was achieved by fly ash filled permeable polymer concrete, it was increased 22% by compressive strength, 190% by tensile strength and 192% by bending strength than that of the normal cement concrete, respectively. 3. The external strength of permeable pipe was in the range of 3, 083~3, 793kg/m, the external strengths of those concrete were increased 2~26% than that of the normal cement concrete. Accordingly, these permeable polymer concrete pipe can be used to the members and structures which need external strength. 4. The static modulus of elasticity was in the range of $5.7{\times} 10^4 ~ 15.4{\times} 10{^4}kg/cm^2 $, which was approximately 35~64% of that of the normal cement concrete. Fly ash filled permeable polymer concrete was showed relatively higher elastic modulus. The poisson's number of permeable polymer concrete was less than that of the normal cement concrete. 5. The dynamic modulus of elasticity was in the range of $83{\times} 10^3 ~ 211{\times} 10{^3}kg/cm^2 $, which was approximately Ins compared to that of the normal cement concrete. Fly ash filled permeable polymer concrete was showed higher dynamic modulus. The dynamic modulus of elasticity were increased approximately 22~45% than that of the static modulus. 6. The ultrasonic pulse velocity was in the range of 2, 584 ~ 3, 587m/sec, . which was showed about the same compared to that of the normal cement concrete. Fly ash filled permeable polymer concrete was in the range of$0.58~8.88 {\ell}/cm^2/hr$, , and it was larglely dependent upon the mixing ratio. These concrete can be used to the structures which need water permeability.

  • PDF

Dynamic analysis of nanosize FG rectangular plates based on simple nonlocal quasi 3D HSDT

  • Boutaleb, Sabrina;Benrahou, Kouider Halim;Bakora, Ahmed;Algarni, Ali;Bousahla, Abdelmoumen Anis;Tounsi, Abdelouahed;Tounsi, Abdeldjebbar;Mahmoud, S.R.
    • Advances in nano research
    • /
    • 제7권3호
    • /
    • pp.191-208
    • /
    • 2019
  • In the present work the dynamic analysis of the functionally graded rectangular nanoplates is studied. The theory of nonlocal elasticity based on the quasi 3D high shear deformation theory (quasi 3D HSDT) has been employed to determine the natural frequencies of the nanosize FG plate. In HSDT a cubic function is employed in terms of thickness coordinate to introduce the influence of transverse shear deformation and stretching thickness. The theory of nonlocal elasticity is utilized to examine the impact of the small scale on the natural frequency of the FG rectangular nanoplate. The equations of motion are deduced by implementing Hamilton's principle. To demonstrate the accuracy of the proposed method, the calculated results in specific cases are compared and examined with available results in the literature and a good agreement is observed. Finally, the influence of the various parameters such as the nonlocal coefficient, the material indexes, the aspect ratio, and the thickness to length ratio on the dynamic properties of the FG nanoplates is illustrated and discussed in detail.

Strength and toughness prediction of slurry infiltrated fibrous concrete using multilinear regression

  • Shelorkar, Ajay P.;Jadhao, Pradip D.
    • Advances in concrete construction
    • /
    • 제13권 2호
    • /
    • pp.123-132
    • /
    • 2022
  • This paper aims to adapt Multilinear regression (MLR) to predict the strength and toughness of SIFCON containing various pozzolanic materials. Slurry Infiltrated Fibrous Concrete (SIFCON) is one of the most common terms used in concrete manufacturing, known for its benefits such as high ductility, toughness and high ultimate strength. Assessment of compressive strength (CS.), flexural strength (F.S.), splitting tensile strength (STS), dynamic elasticity modulus (DME) and impact energy (I.E.) using the experimental approach is too costly. It is time-consuming, and a slight error can lead to a repeat of the test and, to solve this, alternative methods are used to predict the strength and toughness properties of SIFCON. In the present study, the experimentally investigated SIFCON data about various mix proportions are used to predict the strength and toughness properties using regression analysis-multilinear regression (MLR) models. The input parameters used in regression models are cement, fibre, fly ash, Metakaolin, fine aggregate, blast furnace slag, bottom ash, water-cement ratio, and the strength and toughness properties of SIFCON at 28 days is the output parameter. The models are developed and validated using data obtained from the experimental investigation. The investigations were done on 36 SIFCON mixes, and specimens were cast and tested after 28 days of curing. The MLR model yields correlation between predicted and actual values of the compressive strength (C.S.), flexural strength, splitting tensile strength, dynamic modulus of elasticity and impact energy. R-squared values for the relationship between observed and predicted compressive strength are 0.9548, flexural strength 0.9058, split tensile strength 0.9047, dynamic modulus of elasticity 0.8611 for impact energy 0.8366. This examination shows that the MLR model can predict the strength and toughness properties of SIFCON.

인공신경망 기반 동결융해 작용을 받는 콘크리트의 내구성능 평가 (Estimation of Concrete Durability Subjected to Freeze-Thaw Based on Artificial Neural Network)

  • 할리오나;허인욱;최승호;김강수
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제27권6호
    • /
    • pp.144-151
    • /
    • 2023
  • 이 연구에서는 동결융해 작용을 받는 다양한 콘크리트 배합에 대한 실험결과를 수집하여 데이터베이스를 구축하였다. 이를 바탕으로 동결융해 작용을 받는 콘크리트의 인공지능 기반 내구성능 평가모델을 개발하였으며, 회귀분석을 통해 상대동탄성계수 추정식을 도출하였다. 제안된 인공신경망 모델의 오류율과 결정계수는 각각 약 10.4%와 0.7이었으며, 회귀분석 추정식도 유사한 결과를 나타내었다. 따라서, 제안된 인공신경망 모델 및 회귀분석 추정식은 다양한 배합의 동결융해 작용을 받는 콘크리트에 대한 상대동탄성계수를 추정하는 데에 활용될 수 있을 것으로 판단된다.