• 한국염색가공학회지
• /
• 제12권3호
• /
• pp.218-223
• /
• 2000

Color removal of dyeing wastewater is becoming more important due to intensive limitation on color unit of effluent water, so this study was to investigate an efficient color removal of dyeing wastewater. We found that bittern+iron chloride(II) inorganic coagulant developed by Kabool research center is much higher than any other inorganic coagulants for color removal. Optimum pH of this coagulant was 10.5 and removed more than 90% for color removal efficiency. The results showed that COD and color unit of effluent water was average 60mg/L and 200~250 units when continuous activated sludge test after coagulation with this coagulant has done. From the results of the experiments, the application of bittern+iron chloride(II) inorganic coagulant can save the operating cost of wastewater treatment plants.

• 한국염색가공학회지
• /
• 제10권6호
• /
• pp.42-48
• /
• 1998

For the effective operation of complex dyeing wastewater treatment plant, the biodegradability of various dyeing agents were investigated. For experiments in biodegradability, activated sludge from aeration tank of wastewater treatment plant was used. Biodegradability of dyeing agents were compared by measuring the $BOD_5/COD_{Cr}$ ratios and $BOD_5$ removal efficiency. $COD_{Cr}$. removal efficiency of dyeing agents was less than 80% , while $BOD_5$ removal efficiency was less than 60% after of days. Therefore, biodegradation by activated sludge were found very difficult. Judging from this, it is necessary to isolate strains biodegrading dyeing agents in order to operate activated sludge process safely.

• 에너지공학
• /
• 제10권3호
• /
• pp.195-205
• /
• 2001

염색가공공정은 에너지 다소비형이며, 염색조업을 수행하는 과정에서 약 4$0^{\circ}C$ 정도의 열원폐수를 다량으로 방출하고 있지만 이를 회수할 수 있는 기술개발이 이루어지지 않아서 아직 미활용되고 있다. 본 연구에서는 이와 같은 열원폐수의 열을 회수하여 이용할 수 있는 방안을 마련하기 위하여 먼저 염색공정의 특성을 고찰하고. 직물별, 공정별 에너지원단위를 조사한 결과 상대적으로 에너지원같위가 높은 T/C, T/R 교직물 업체나 폴리에스테르 염색업체에서 폐수열을 회수하여 이용하기에 적합한 것을 알 수 있다. 그리고 염색업체별, 계절별 폐수의 배출량과 온도를 조사한 결과 각 업체당 평균 폐수배출량은 20,470톤/월이고, 평균폐수온도는 41.$0^{\circ}C$로 나타났다 또한, 배관 침적, 폐쇄 등으로 폐열회수시스템의 안정적 운전이나 열교환기의 성능에 악영향을 끼칠 수 있는 SS의 경우 폴리에스테르 염색폐수가 가장 낮아 폴리에스테르 염색폐수가 폐열회수에 가장 유리할 것으로 판단되었다. 염색공장에서 기존에 사용하고 있는 시스템과 폐수열이용 시스템의 에너지단가를 비교해보면 폐열회수시스템에서 압축식 열펌프를 적용하면 에너지단가는 22.50원이 되어 매우 경제적이며, 증기생산을 위한 보일러 연료로 LNG를 사용하는 업체에 압축식 폐열회수시스템을 적용할 경우가 투자비 회수기간이 2.09년으로 경제성이 매우 우수한 것으로 나타나 열펌프시스템의 적용기술을 보급할 수 있는 기반을 마련하였다.

• KSBB Journal
• /
• 제19권5호
• /
• pp.390-393
• /
• 2004

Oxygen uptake rate (OUR) was used as an indicator of microbial activity. In this study OUR at dyeing wastewater in the pilot plant was monitored to examine biological activity. Correlation between inlet COD concentration and maximum OUR showed that maximum OUR was proportional to inlet COD concentration. Changes in the OUR values reflected the changing waste load in the reactor. Consequently, OUR can be used to estimate biological activity of inlet COD concentration. This study showed that biodegradable COD at dyeing wastewater could be calculated from OUR and yield coefficient. Non-biodegradable COD was able to be calculated from a difference between initial COD concentration and biodegradable COD.

• 한국염색가공학회지
• /
• 제12권2호
• /
• pp.96-102
• /
• 2000

For the effective treatment of dyeing-complex wastewater, the most effective chemical coagulation method was studied. For the chemical coagulation of dyeing-complex wastewater, polyferric sulfate, $4Al_2(SO_4)_3$, PAC, ferrous sulfate, ferric sulfate, $FeCl_2$ and lime were used. It was investigated that polyferric sulfate was the most efficient coagulant. The optimal conditions and results for polyferric sulfate include the followings. When initial $COD_{Mn}$ concentration was 600mg/L, the optimal initial pH, dosage of coagulant, dosage of lime and PAA for $COD_{Mn}$ removal efficiency were 5, 1,200mg/L, 500mg/L and lmg/L, respectively. The optimal dosage of polyferric sulfate was increased proportionally to the influent $COD_{Mn}$ concentration.

• 환경위생공학
• /
• 제14권2호
• /
• pp.40-45
• /
• 1999

This study deals with an investigation on low cost adsorbents locally available n dyeing wastewater treatment of color removal. Peat, bentonite, slag and fly ash were utilized for this study. Considering that low cost adsorbents contained in $SiO_2$, $Fe_2O_3$ and $Al_2O_3$ compositions, and coagulants were mainly used aluminate and ferrate in color removal. Color of dyeing wastewater was high removed in peat, berntonite and slag except for fly ash with passed time. It could be known that color removal of peat and slag were increased to pH 4, but was hardly changed with advancing to alkaline. Color intended to be high removed with increasing of agitation speed but to be almost slow after 150rpm. As a result on the experiment of Freundlich adsorption isotherms, adsorption intensity(l/n) appeared to be peat>fly ash>slag>bentonite and adsorption capacity(k) came out peat>bentonite>slag>fly ash. Therefore, if low cost adsorbents substituted for existing adsorbents, peat, bentonite and slag could look forward to an expected economical effect.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2003년도 The 4th Korea-Italy Workshop
• /
• pp.95-97
• /
• 2003

The main purpose of this work is to investigate the performance of membranes for treatment of dyeing wastewater. The microfiltration (MF) membranes (titania-blended polysulfone & alumina) were prepared. The nanofiltration (NF) and reverse osmosis (RO) membranes were kindly supplied by the Sae-Han. In order to reuse the wastewater for dyeing, the effluents were treated by the high flux RO and the fouling resistant RO (FRM) membranes. Also, the NF membrane was used for water reuse in rinsing.

• 미생물학회지
• /
• 제28권3호
• /
• pp.243-248
• /
• 1990

Genetically engineered strains of Pseudomonas, which could degrade the various aromatic hydrocarbons, were acclimated to the synthetic wastewater with increasing substrate concentration. All of the tested strains except KUD101 showed 70-90% of the COD removal efficiencies. Acclimated strains, Pseudomonas putida KUD106, KUD107 and KUD108 were inoculated into the ordinary activated sludge and these sludges were used in the dyeing or alkylbenzene wastewater treatment system. In the case of the wastewater containing alkylbenzene compounds, COD removal efficiency was 12-14% higher than that of the ordinary activated sludge, while it was not effective for dyeing wastewater. On the other hand, the floc formation of the activated sludge inoculated with genetically engineered strains was more rapid in both wastewaters tested than that of the activated sludge by the ordinary natural strains.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.996-1001
• /
• 2009

The purposes of this work were suggested and validated the methods of heat recovery from dyeing wastewater exhausted in Sihwa and Banwol dyeing industrial park. We analyzed the present conditions of heat supplies and demands. So it was made a selection of the system combined heat exchanger for waste heat recovery and the high temperature heat pump. We decided the specifications of the heat recovery facilities. After this, economical assessment is performed to this system. The payback periods are within 4 years, 20 years and 5 years in case of K company, S company and A company. In addition, when they are produced the heat of same capacity, quantities of pollutants from used fuels were calculated.

• Membrane and Water Treatment
• /
• 제8권1호
• /
• pp.1-18
• /
• 2017

In this study, reuse of biologically treated wastewater of denim washing and dyeing industry has been evaluated by membrane technologies. After that experiments were carried out at laboratory scale in textile dyeing unit by using obtained permeate water samples on 100% cotton based raw fabric belonging to examined industry. During membrane experiments, two different UF (UC100 and UC030) and two different NF (NP010 and NP030) were evaluated under alternative membrane pressures. In permeate water obtained on selected samples, conductivity at the range of $1860-2205{\mu}S/cm$, hardness at the range of 60 to 80 mg/L, total color at the range of 2.4 to 7.6 m-1 and COD at the range of 25-32 mg/L was determined. The following analyzes were performed for the dyed fabrics: perspiration fastness, rub fastness, wash fastness, color fastness to water, color fastness to artificial light, color measurement through the fabric. According to analysis results, selected permeate water have no negative impact on dyeing quality. The study showed that membrane filtration gave good performance for biologically treated textile wastewater, and NF treatment with UF pre-treatment was suitable option for reuse of the effluents.