• Journal of the Korean Society of Clothing and Textiles
• /
• v.9 no.2
• /
• pp.75-84
• /
• 1985

In order to improve dyeing and finishing technology of thin cloth of microfiber(super-fine fiber), the degrees of deep dyeing method, the light fastness, and the washing fastness were investiagted. 1. The thin cloth made of microfiber, $0.15^d\~0.2^d$, was conjugated type and the dyeing degree was lower at 5 to $10\%$ than that of cloth made of common fiber. The cloth of excellent dyeing fastness, light fastness, was developed by increasing the concentration of dye of high quality up to $5\~10\%$. 2. Because refractory rate of microfiber of $0.2^d$ was lower than that of $0.01^d$, the surface refractory rate of $0.2^d$ was lower than that of $0.01^d$ fiber. Therefore the surface of micro-fiber, $0.2^d$, was more rougher than that of $0.01^d$ and it belongs to separate type. 3. The higher degree of dyeing was increased by using dye of microparticle. Also the degree of textile printing was increased by adding urea solution ($20\%$) and glycerine diethylene glycol. 4. Light fastness was very excellent, marked 5 grade. However, washing fastness was 2$\~$3 grade. After dyeing, we could improve to 4 grade, through hot water washing including some organic chlorine solvent. 5. Super microfiber of $0.01^d$ will not be dyed by present dye and dyeing equipment, because right reflection light rate(white light) of fiber surface was too high and the more refraction rate higher the more surface refraction rate will be increased.

• Textile Coloration and Finishing
• /
• v.31 no.1
• /
• pp.48-64
• /
• 2019

With evolution in the production environment of the textile industry, the need for non-water-based dyeing technologies and eco-friendly process facilities in the dyeing and processing stages has increased. In recent years, supercritical fluid dyes have been developed and commercialized in Europe, centering on this demand. However, so far, such dyes have been mainly applied in the processing of PET fibers. Basic research has mainly involved investigation of dyeing by supercritical carbon dioxide or solubility of such dyes, and more in-depth research should be continuously carried out. In this review, we describe the types and characteristics of supercritical fluids that exhibit specific properties at pressures and temperatures over the critical point. In addition, the state of the art in the dyeing and processing technology using supercritical fluids and associated, processing problems, environmental regulation, and wastewater treatment issues are described in detail. We hope this review can contribute to the supercritical fluid technology being further developed as an environment friendly dyeing processing method. Furthermore, we expect that the technique can be used as a means of ensuring different, high-quality dyed products.

• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.219-225
• /
• 2022

The textile industry in Korea, the dyeing sector is an energy-intensive sector and has low per-unit productivity due to its labor-intensive nature. If the defective rate of dyed fabrics is high, additional costs are incurred due to an increase in production cost due to re-dyeing. Therefore, the goal of the dyeing factory was to minimize the defect rate rather than to save energy. It was difficult to check the dyeing state of the fabric in real time due to the risk of accidents due to burns or pressure when dyeing in a high-temperature and high-pressure environment. In this paper, a complex sensor that can measure the exhaustion rate of dye solution in the dyeing machine using turbidity, pH, and conductivity sensors was proposed, and the experimental method and experimental results were analyzed.

• Proceedings of the Korean Fiber Society Conference
• /
• 2007.11a
• /
• pp.155-158
• /
• 2007

• The International Journal of Costume Culture
• /
• v.5 no.2
• /
• pp.53-65
• /
• 2002

Morphology of polyester fiber was physically modified by solvent treatment. PET fiber was treated with N,N-dimethylformamide (DMF) at 100, 120, $140^{circ}C$ for 10 minutes without tension. The structural changes in the morphology of DMF-induced modified PET fiber were FTIR and SEM analysis. Also dyeing behavior of DMF-treated polyester fibers with various disperse dyes was studied to detect changes of amorphous area in fine structure. DMF treatment resulted in increases in total void content, degree of crystallinity, trans isomer content, chain folding, segmental mobility and molecular packing, but it resulted in decreases in amorphous orientation, intermolecular forces and individual void size through longitudinal shrinkage, lateral welling and removal of oligomers. Void-size distribution could be estimated from the dye uptake with various sizes of disperse dyes. In contrast to the large increases in dye uptake with small dye molecules, there is no and little dye uptake with the bulkiest dye, which means that void size is bigger or smaller than the volume of each dye. Diffusion rates of dye molecules showed increases. This dyeing study revealed that the disperse dyeing is very effective method for characterizing the internal morphology of polyester fiber.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.3 no.2
• /
• pp.37-41
• /
• 1979

In order to obtain tasic information for solvent dyeing, polyethylene terephthalate (PET) films was pretreated with water, tetrachloroethylene (TCE) and water/TCE emulsion for three hours at $140^{\circ}C$ for stabilizing the substrate. By film roll cyliderical method, Disperse Red 60, Disperse Yellow 42, and Disperse Blue 27 were diffused in the films and examined dyeing properties. The results are summarized as follows; 1) Diffusion coefficient increases in the order, waterTCE>water/TCE 2) A linear relationship between diffusion coefficient and shrinkage was Observed 3) The temperature dependence of the diffusion coefficient can't be expressed by WLF equation.

• Fashion & Textile Research Journal
• /
• v.5 no.4
• /
• pp.399-407
• /
• 2003

The natural dyeing of silk fabric with Purple-Fleshed Sweet Potato (PSP) was investigated. The colorant was extracted with distilled water, and the color difference (${\Delta}E^*$) was increased with increasing the amount of PSP in extraction. The proper temperature and time for the extracting of colorant with PSP were $60^{\circ}C$ and 60 minutes. The optimum temperature, time and pH for the dyeing of silk with extracted PSP were $60^{\circ}C$, 60 minutes and pH 4 respectively. In various mordanted methods, the color difference values of post-mordanted silk fabric were higher than those of pre- and simultaneous-mordanted method. And the wide range of colors( GY, Y, YR, R, RP) were obtained according to various mordants, mordanting methods and mordant concentrations. Light colorfastness of the mordanted silk fabric was improved. Laundering colorfastness, dry cleaning colorfastness and perspiration colorfastness were shown to be good.

• Textile Coloration and Finishing
• /
• v.16 no.3
• /
• pp.8-13
• /
• 2004

This research aimed at scrutinizing the comparative dyeability of some disperse dyes at low temperature on ultra-microfiber polyester, islands in the sea type (0.05 denier), which has claimed utmost fastness and improved uptake of dyeing. Comparisons of dyeability, such as rate of dyeing and color depth, on ultra-microfiber polyester were evaluated by H.T. exhaust dyeing method and followed by the test of rubbing fastness. To achieve high wet fastness, some commercial disperse dyes, Terasil WW and Megacron dyes, which have been recently launched for excellent wash fastness, have been examined compared with conventional disperse dyes, C.I Disperse Red 167 and C.I Disperse Orange 30.

• Fibers and Polymers
• /
• v.3 no.3
• /
• pp.85-90
• /
• 2002

Five temporarily solubilized reactive disperse dyes were synthesized and characterized. They were applied to polyester/cotton blend fabric using one-bath dyeing method without dispersing agent. The dye that has azonaphthalene chro-mophore seemed to not only be exhausted on polyester but also react with cotton. But other dyes were selectively dyed on polyester and showed limited uptake on cotton. Good levelling as well as moderate to good colour fastness was obtained with the dyes on P/C blend fabric.

• Journal of Sericultural and Entomological Science
• /
• v.45 no.1
• /
• pp.66-70
• /
• 2003

Silk fabrics were dyed with persimmon dyeing solution. The persimmon extracts were obtained with boiling water from persimmon fruits and leaves. The changes of K/S values were investigated according to the concentration of solution, the ripeness of persimmons and the method of mordanting. The colours of the fabrics differed according to the kinds of mordants. The mordant, FeSO$_4$, was more effective than other mordants. The physical properties were not changed hardly after the natural dyeing with persimmon extracts.