• Textile Coloration and Finishing
• /
• v.8 no.5
• /
• pp.7-16
• /
• 1996

The air-flow dyeing machine is a new type of dyeing machine. Which is an energy saving type to be able to dye the fabrics with the lowest liquor ratio and in shorter time. This machine is operated with an aerodynamic system rather than a hyd raulic system for traditional jet or overflow dyeing. An air-flow dyeing machine(Green-flow) by the use of aerodynamic technology was developed and compared with the Luft-roto machine made by Thies Company, Germany, in this study. Three samples were dyed with both machines under the same dyeing conditions and color fastness, dyeing levelness, drapability, and mechanical properties of these samples were compared. The results were as follows; Both machines have almost the same dyeability. The dyeability was good at liquor ratio of 1: 3.5 and the speed of 450yds/min. The order for drapability was Crepe de Chine > Cool Peach > Charmeuse. Except for the color fastness of sublimation being below class 4, most color fastness of samples dyed with Green-flow m/c were above class 4. The maximum speed was 510yds/min. for Crepe de Chine and the standard deviation of K/S value was lower for Charmeuse and Cool Peach when employed on the "Green-flow" machine and lower for Crepe de Chine when employed on the Luft-roto machine. Comparing with dyeing of the Green-flow machine and that of the Luft-roto machine, the RT of the Charmeuse was found to be higher with the Green-flow machine and thus the sample had an improved wrinkle recovery. LT and WT of Cool Peach were higher, and shear properties(G, 2HG, 2HGS) of Crepe de Chine were higher, both turning out as suitable for clothing. clothing.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.4
• /
• pp.510-516
• /
• 1999

Dyeing properties of cotton fabrics with green tea colorants were studied by investigating the effects of dyeing conditions such as colorants concentration. pH dyeing temperature and time on dye uptakes effects of mordats on dye uptakes and color change and effects of cationizing agent on dye uptakes. And various colorfastnesses of dyed fabrics were evaluated for practical use. Green tea colorants showed low affinity to cotton and produced yellowish red color. Freundlich adsorption isotherm was obtained thus it is considered that hydrogen bondings are formed between colorants and cotton. Dye uptake was maximum at pH 5 and decreased as pH increased. Mordants especially Cu and Sn were effective for increasing dye uptake. Dye uptakes were improved remarkably by cationizing. Cationized cotton showed Langumuir adsorption isotherm indicating that ionic bondings were formed between colorants and cationized cotton. While mordanting did not affect lightfastness cationizing affected adversely. Colorfastness of cationized sample was generally inferior to that of mordanted samples.

• Textile Coloration and Finishing
• /
• v.17 no.3 s.82
• /
• pp.1-7
• /
• 2005

Cationic dyeable polyester(CDP) was produced through melt blending of cationic chips having $2mol\%$ of sodium salt of dimethyl ester of 5-sulfoisophthalic acid(DMS salt) and normal polyester chips in different proportions to obtain yarns having varying amount of comonomer in the fiber. The modified polyesters showed increased moisture regain, decreased viscosity, lower softening point and improved antistatic characteristics, according to the amount of modifier. In dyeing at $100^{\circ}C$ the dyeing rate of cationic dyes with CDP fiber increased slowly than that of disperse dyes. In dyeing at $120^{\circ}C$ cationic dyes reached to equilibrium at 30min and disperse dyes at 10min. Cationic dyes in dyeing of CDP fabric have a better wash fastness compared with disperse dyes, also rubbing fastness of cationic dyes is better than that of disperse dyes. The light fastness of CDP fabric for cationic and disperse dyes is not good. The fastness of 75d/36f CDP fabric is higher than 75d/72f fabric. Solvent wicking fastness of CDP with cationic dyes is better than that of disperse dyes.

• Textile Coloration and Finishing
• /
• v.16 no.6
• /
• pp.1-9
• /
• 2004

The dyeings of cotton and silk fabric with Laurus tree extracts were investigated. The colorant was extracted with distilled water at $100^{\circ}C$ for lh. Dyeability(K/S), color fastness and antibacterial property of cotton and silk fabric were tested under conditions of various time, temperature, concentration, repeat-number of dyeing and mordants. The characteristics of dyeings Laurus extracts were figured out by K/S and CIELab values and color-fastness test was estimated in terms of wash fastness and light fastness. The maximum wavelength of spectrum was 670nm. The K/S value of cotton and silk fabric increased with increasing dyeing time and the exhaustion was saturated in 90min. Optical dyeing temperatures of cotton and silk fabrics were $60^{\circ}C$ and $80^{\circ}C$, respectively. The mordant effect on cotton fabric was achieved using Fe mordant. On the other hand, the mordant effect on silk fabric was obtained using Fe and Cu mordants. The wash fastness of cotton fabric was higher than that of silk fabric. Antibacterial property of silk dyeing was greater than that of cotton dyeing. In addition, the excellent antibacterial effect was imparted by Fe-post mordant method.

• Fashion & Textile Research Journal
• /
• v.22 no.1
• /
• pp.119-129
• /
• 2020

Unlike synthetic dyes, natural dyes do not affect the human body or create atmosphere pollution that are also mothproof, antibiotic and sterilized. This study examined the changes in dye adsorption properties according to mordant types and mordanting method to qualify trends using sage and rosemary extracts. Dyeability of sage extract is often similar to rosemary extract regardless of dyeing conditions. Dyeing properties of herb colorants on cotton, silk and wool fiber and effect of dyeing conditions on dye uptake were also compared. Dyed fabric showed a yellowish color and the dyeing affinity was somewhat good with rosemary extract. The surface color of the dyed fabrics was darkened by mordant treatment. The K/S value of herb colorants of protein fiber was higher than cellulose fiber. The concentration of mordant having the highest dyeing affinity was different from the mordant type. Regardless of the type of fiber, the K/S value of premordanting was the highest in mordanting method, and the K/S value of simultaneous mordanting indicated no noticeable mordant effect. The fastness of washing of silk fabric was reduced the most by mordant treatment. The lightfastness was reduced in Al mordant treatment regardless of the type of fiber. The lightfastness of wool increased somewhat by mordant treatment.

• Textile Coloration and Finishing
• /
• v.28 no.3
• /
• pp.195-207
• /
• 2016

In this study, we examined the influence of the pigment characteristic and dyeing condition on dyeing properties and functionality by using Perilla Frutescens L. Britt extracts, in which ethanol, distilled water and NaOH solution were used as 3 different solvents. Changes in dyeing conditions include variations in dye concentration, dyeing temperature, time and pH on dye uptake, and K/S values were compared according to these changes. Additionally, color changes were observed according to the use and types of mordant. Ultraviolet-visible spectrum was utilized to investigate the pigment characteristic, and as a result, chlorophyll was identified in ethanol extract, whereas tannin was identified both in distilled water extract and NaOH solution extract. By using FT-IR analysis, these tannins in distilled-water-extract and NaOH solution extract were verified to be hydrolyzable tannin. When dyeing silk, dye uptake increased as dye concentration, dyeing temperature and time increased, while it decreased as pH of the extract increased. Fabrics dyed without a mordant produced Y-series colors, and fabrics dyed with mordants showed various colors depending on the mordant types. Even though color fastness to washing and light was unsatisfactory, fastness to rubbing and perspiration showed relatively high grade. Moreover, deodorant ability of dyed fabric improved.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.2
• /
• pp.279-285
• /
• 2005

In order to activate the characteristics of charcoals in fiber systems, this study was carried out to experiment with the particle size from two micrometers to ten micrometers of charcoal powders on silk fabrics. The results obtained were as follows; The silk fabrics were dyed with gray color by charcoals effectively. The K/S value, that is indicative of the dye affinity, became higher as the increase of dyeing temperature, dyeing time, and dyeing concentration. Te dyeing effects were the highest with 50%(o.w.f.) of charcoals at $100^{\circ}C$ for 120 minutes in this experiments, It was observed the surfaces of silk fibers were mainly adcorbed with charcoal powders of the particle size from two micrometers to four micrometers by scanning electron microscope. Dyed silk fabrics showed comparatively low fastness to the fade of launding, the stain of the treatment of perspirations, and the strain of water fastness test, but good fastness to the stran of laundering, te drycleaning, the fade of treatment of perspirations, and the fade of water fastness test. In connection with the functional properties of dyed fabrics, the deodorizations were drastically improved, and the far-infrared emissions improved highly, and also the antibacterials were comparatively good.

• Textile Coloration and Finishing
• /
• v.2 no.3
• /
• pp.36-42
• /
• 1990

The effect of urea and its derivatives, which are known as structure breakers of water, in the dyeing of silk with acid dyes was investigated. Without ureas the maximum dye uptake was observed at $60^{\circ}C$ when dyed with Milling Cyanine 5R, but in the presence of ureas the maximum dye uptake was decreased and its temperature also shifted to lower regin in the order of urea >N-methyl urea > N,N-dimethyl urea>tetramethyl urea. These tendencies were more marked in the dyeing of silk fiber with Orange II, a typical levelling type acid dye. These can be interpreted as the decrease in the hydropholic interaction between fiber molecules which results in the broadening of the inter micelie spacing. The increased partition coefficient of dye molecules in the bath by the action of ureas also contributes to dyeing results, and it can be seen from the spectral characteristics of dyes in aqueous urea solution.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.1
• /
• pp.31-45
• /
• 2022

After manufacturing the natural dyed actual size Hanji using 11 kinds of plant natural dyeing materials and 2 kinds of animal natural dyeing materials, the color characteristics and color change and color fastness after post-mordanting were compared and discussed. The hues of 13 types of natural dyed Hanji were black, PB, and RP, each with 1 type, YP with 3 types, and Y with 7 types. Among the natural dyeing materials, Chinese ink, indigo and Lac showed high color yield and color difference, and violet-root cromwell and gardenia seeds showed low color yield. The color fastness of Hanji dyed with turpentine diluted Ottchil, Pagoda tree seeds, Chinese ink and indigo was excellent, while that of gardenia seeds and violet-root cromwell were very poor. After post-mordanting of natural dyed Hanji with Al, Cu, and Fe mordants, the hue changes were show up the Alnus firma, clove, lac and cochineal. In addition, the color difference was very diverse and was overall the most biggest due to Fe mordant. After 72 hr. of UV irradiation on post-mordanting natural dyed Hanji, hue change was observed in 3 types and color fastness was improved in 8 types by post-mordanting. The Hue and color fastness are significantly different depending on the type of natural dying materials and post-mordants. Therefore, when dyeing Hanji with natural dyes, it is necessary to dye with sufficient knowledges and informations about the desired color and fastness.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.3_4
• /
• pp.473-484
• /
• 2002

The physical characteristics of silk and wool fabrics dyed with OFS-FR and SM-FR were examined and color difference and colorfastness of these fabrics were analyzed. The results are as follows; 1. The thickness, density and weight of both dyed fabrics were increased than those of undyed fabrics independently of dyeing materials and mordants. 2. Air permeability of all the silk samples increased than that of undyed silk, on the other hand, air permeability of most of wool samples decreased than that of undyed wool. 3. Thermal insulation values of silk samples were not consistent with dyeing conditions, but those of wool samples increased than those of undyed fabrics regardless of dyeing materials and mordants. 4. Color difference was clear between OFS-FR and SM-FR dyed fabrics. The colors dyed with OFS-FR-Al and OFS-FR-chitos an showed violet, those dyed with SM-FR displayed yellowish, in addition to in case of wool, dyed with OFS-FR-Cu the color was greenish yellow, in case of silk dyed with SM-FR-Cu that was yellowish red. 5. Sense of silk fabrics by sensory-test was soft and smooth. Feeling of colors in silk fabrics was wick, warm and slightly brilliant. In case wool, sense of dyed fabrics was slightly soft and slightly rough. Feeling of colors in wool fabrics was warm but not elegant. Therefore the result of sensory-test in silk might be better than that of in wool. 6. Colorfastness to dry cleaning and perspirations was good, but that to washing and sunlight was not fine.