• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.03a
• /
• pp.215-216
• /
• 2009

• Textile Coloration and Finishing
• /
• v.23 no.4
• /
• pp.298-303
• /
• 2011

Aramid fibers have been widely used as the reinforcement for composites due to their high modulus and strength. Nowadays the safety measures is required to improve the personal protection. The dyeing of aramid fibers is considered to be very difficult and their dyeing mechanism is not well illucidated. Therefore, this study is to establish the dyeing & printing technology for aramid fibers. The effects of swelling agent and neutral salt in the dye bath on the obtained colors were studied. Also dyeing method of aramid fibers depending on dyeing temperature and dye concentration were established. Color fastness of the dyed aramid fabric with cationic dyes were acceptable excluding light fastness.

• Textile Coloration and Finishing
• /
• v.15 no.6
• /
• pp.39-46
• /
• 2003

The experiments about dyeing concentration, temperature and time were done using yellow, red and purple loess as natural inorganic dyes in order to verify a degree of dyeing, characteristics of color and fastness. The results were as following; 1. As a result of analyzing components of loess, purple loess was much than other loess in quartz component and coarse particles contained. This affected to the degree of dyeing. 2. The stronger dyeing concentration was, the more the degree of dyeing was improved, and yellow loess containing fine particles was the best in the degree of dyeing. 3. When it was dyed with raising up to $100^\circ{C}$ for 10 minutes after stirring for 20 minutes at $60^\circ{C}$, was better than on starting at $40^\circ{C}$ or $80^\circ{C}$ in the degree of dyeing. Also yellow loess was the best in these experiments. 4. Washing fastness of loess was low such as other natural dyes, but dyeing wasn't transferred to other textiles. On the other hand, light fastness of it was very excellent and rubbing fastness was relatively good as 3~3.5.

• Textile Coloration and Finishing
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2003

To study the dyeability(ΔE value) and color depth of silk fabrics dyed with Impatiens balsamina extracts. its flower, leaf and stem was extracted by water. This paper investigated some experiments under the various dyeing conditions such as dyeing temperature, dyeing time, repetition of dyeing, dyeing pH with silk fabrics dyed with Impatiens balsamina extracts. The results obtained were as follows 1. It was found that $\lambda_{max}$ of silk fabrics dyed with Impatiens balsamina extract was 260nm and its flower, leaf , stem and different colored flower(white, pint violet) had same $\lambda_{max}$ at 260nm. 2. $\Delta{E}$ values were increased when dyeing temperature, repetition of dyeing and time was higher, value of munsell of silk fabrics dyed with Impatiens balsamina extract was Yellow-Red. But dyeing temperature, repetition of dyeing and time was higher, shifted to longer wavelenth side. 3. Silk fabric dyed with Impatiens balsamina extracts at acidic pH was colored reddish Yellow-Red, alkali bath colored yellowish Yellow-Red in silk fabrics dyed with Impatiens balsamina extract.

• Journal of Fashion Business
• /
• v.15 no.2
• /
• pp.120-130
• /
• 2011

This study is a fundamental research on the natural Polygoum tinctoria dyeing to quantify scientifically and satisfy the reproducibility of the procedure. By dyeing the silk fabrics, the establishment of accurate dyeing method was sought. At the same time, we tried to modify the traditional dyeing methods, broaden the methods, and apply the dyeing variously. The dyeability and color changes were compared and reviewed according to the changes in the reducing temperature, reducing time, concentration of the reducing agent, dyeing temperature, dyeing time, concentration of NaOH, and the number of repetition of dyeing. The optimum conditions in the dyeing procedure are as follows: Added concentration of the reducing agent is 3g/${\ell}$. Reducing temperature is $60^{\circ}C$. Reducing time is 40minutes. Dyeing temperature is $30^{\circ}C$. Added concentration of NaOH is 1g/${\ell}$. Dyeing time is 30minutes.

• Textile Coloration and Finishing
• /
• v.27 no.4
• /
• pp.301-308
• /
• 2015

This study optimizes dyeing conditions for polyamide-imide fabric using cationic dyes. Dyeing and fastness characteristics of polyamide-imide fabric were investigated with three cationic dyes and 2-hydroxyacetophenone as a swelling agent under various dyeing conditions such as dye and swelling agent concentrations, dyeing temperature and time, pH of dye bath. The dyeing properties were evaluated in terms of dye exhaustion, K/S value and color fastness. The optimized dyeing temperature and time were $130^{\circ}C$ for 90 min for the dyes. Under weak acidic conditions in the range pH 5 to 7, the exhaustion of cationic dyes could be enhanced leading to higher adsorption. Wash and rubbing fastness properties were generally good, while light fastness was slightly low, which can be attributed to the poor photo-stability of the cationic dyes.

• Fibers and Polymers
• /
• v.6 no.1
• /
• pp.35-41
• /
• 2005

Research and development of nano fiber products is very active over the world. Physical characteristics and dyeing properties of nylon 66 nano fiber were investigated in this study. X-ray diffraction, DSC, analysis of amino end group, and water absorption were performed to get information concerning physical properties of nano fiber. Nylon 66 nano fiber was dyed with high molecular mass acid dyes. Effects of dyeing temperature, pH of dyeing solution, and concentration of acid dyes on dyeing properties such as rate of dyeing and the extent of exhaustion, were examined and compared to those of regu­lar fiber. It was found that nano fiber adsorbed acid dyes at lower temperature, got rapidly dyed, and its extents of exhaustion at specific dyeing temperature were higher than regular fiber. It was also observed that nano fiber could adsorb a large amount of acid dye without a significant loss in the extent of exhaustion. Washing fastness of the dyed nano fiber was lower by $1/2\~1$ grade, light fastness by 1 grade than the dyed regular fiber.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.6
• /
• pp.979-993
• /
• 2016

Mongolian cashmere sliver, yarn, and fabric were dyed and bleached with a solution of ascorbic acid and iron sulfate at $70^{\circ}C$, and then dyed using natural indigo powder at the dyeing temperature of $25^{\circ}C$ to $90^{\circ}C$ for 15-90 minutes using the IR dyeing machine. K/S values of bleached samples decreased significantly when dyed above $70^{\circ}C$ dyeing temperature for a longer dyeing time. Bleached cashmere fabric showed a greater loss of tensile strength than unbleached cashmere fabric, even when the samples were dyed at $40^{\circ}C$. With a higher dyeing temperature, yarns lost fullness, became thinner, and the pores between the yarns were enlarged. The x-ray diffraction pattern exhibited a prominent increase in crystallinity and the protein assay indicated a loss of protein in the bleached sample dyed at $90^{\circ}C$. Thinning of scales, fractured or raised tip of scales, and roughness on the entire surface of the fiber were also observed. The results indicate that bleaching and high temperature dyeing cause a serious damage to cashmere fibers. In addition, bleaching and high temperature dyeing cause significant fiber damage. Natural indigo dyeing using low temperature dyeing is recommended to produce blue color cashmere.

• Fashion & Textile Research Journal
• /
• v.6 no.2
• /
• pp.239-244
• /
• 2004

On the whole the various medium colors were developed by repeat dyeing with different colorants after dyeing with one colorant in case of natural dyeing. In this study, in order to obtain various colors on wool fabrics with Gardenia and Sappan wood colorants, pre-mordanting and combination dyeing were carried out. Gardenia and Sappan wood used as natural colorants for combination dyeing showed good miscibility in dye bath, Metal compounds containing alum, copper and iron were used for pre-mordants. The various medium colors such as yellow-red were obtained according to various metal compounds for pre-mordants and various mixing portion of these natural colorants. The surface reflactance spectra and color characteristics of wool fabrics by mordanting and combination dyeing were investigated.

• Journal of the Korean Home Economics Association
• /
• v.42 no.7
• /
• pp.55-61
• /
• 2004

The Purpose or this study was to determine the optimal dyeing condition or Chelidonium majus extracts onto silk fabrics. Among the various dyeing properties, the colorfastness of fabrics dyed with Chelidonium majus extracts was investigated in different conditions such as dyeing temperature, dyeing time, dyeing pH etc. We also tried to dye fabrics using the Chelidonium majus extracts which were lyophilized. Although mordant was not used, dyed fabrics showed relatively good dyeability and the main pigment of Chelidonium majus showed yellow vividly in the appropriate dyeing conditions. At a dyeing temperature above 40$^{\circ}C$, the $\Delta$E value increased but the yellowish tint decreased. The pH value of unadjusted Chelidonium majus extracts was 6.4, at which a deep yellow was obtained. The dye equilibrium was reached 40 minutes after dyeing. The colorfastness to washing and light was poor at 1-2 and 2-3, respectively, but the dry-cleaning fastness was good at 4-5.