• Title/Summary/Keyword: Dyeing, Fastness

Search Result 557, Processing Time 0.021 seconds

Dyeing properties and colorimetric characteristics for cellulose fabrics dyed with indigo by different reducing conditions (쪽 염료의 환원조건에 따른 섬유소 직물의 염색성과 색채특성)

  • Shin, Judong;Choi, Jongmyoung
    • The Research Journal of the Costume Culture
    • /
    • v.24 no.6
    • /
    • pp.777-787
    • /
    • 2016
  • This study was carried out in order to provide useful data for planning fabrics of summer eco-friendly fashion products. The fabrics used in this study were four cellulose fibers: cotton, cotton/mulberry blended, flax, and flax/lyocell blended. Dyeing with natural indigo was carried out under three different reducing conditions (i.e., general, eclectic, and eco-friendly) that have different reducing agent and pH levels, and hydrosulfite and glucose were used as a reducing agent. The dye uptake (K/S value) of fabrics dyed with natural indigo by a reducing condition was the highest at 660nm. Regardless of the fabrics, dye uptake was the highest under the general reducing condition and the lowest under the eco-friendly reducing condition. Under different reducing conditions, the dye uptake of natural indigo fabrics with the maximum absorption wavelength indicated a difference. The colorfastness of cellulose fabrics that were dyed with natural indigo had a rate of 4 to 5 except for rubbing fastness, which indicated good colorfastness. Additionally, natural indigo-dyed cotton and flax fabrics had good antibiosis. When the color characteristics of fabrics dyed with natural indigo were measured, all of the three reducing conditions created purple blue (PB) colors, and the color characteristics of dyed fabrics by reducing condition and fabric showed significant differences.

A Pre-treatment Process for Natural Dyeing of Wool to Impar t Durable Antimicrobial Efficacy

  • Raja, A.S.M.;Thilagavathi, G.
    • Textile Coloration and Finishing
    • /
    • v.23 no.2
    • /
    • pp.69-75
    • /
    • 2011
  • A pre-treatment process has been developed for natural dyeing of wool by which the dyed materials have been imparted antimicrobial efficacy against both gram-positive and gram-negative bacteria durable up to 20 washes. In this process, wool fabrics were treated with citric acid under oxidizing condition prior to dyeing. The treated fabrics were then dyed with four different types of natural dye powders obtained from leaves of silver oak, wattle, tanner's senna and flame of forest. All the natural dyes produced yellowish brown colour on wool fabrics. The washing and light fastness properties of the fabrics subjected to pre-treatment were one grade higher compared to those of the dyed fabrics without pre-treatment. The pre-treated wool fabrics showed antimicrobial efficacy against both gram-positive bacteria (Staphylococcus aureus) and gram-negative bacteria (Escherichia coli). The fabrics dyed without pre-treatment showed antimicrobial efficacy against gram-positive bacteria (Staphylococcus aureus) only. The durability of antimicrobial efficacy was higher in pre-treated and dyed wool fabrics compared to the dyed fabrics without pre-treatment.

Dyeing Properties, UV Protection, and Deodorization of Silk Fabric Using Hot Water Extract of Ecklonia cava

  • Wu, Yue;Yi, Eunjou
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.46 no.1
    • /
    • pp.132-146
    • /
    • 2022
  • To explore the potential use of Ecklonia cava as a natural dye for textiles, silk fabric was dyed with Ecklonia cava extracted by hot water under varied conditions, including temperature, duration, dye concentration, mordanting, and pH adjustment. The fabric was also evaluated for fastness, sun-protective property, and deodorization. Ecklonia cava extract was estimated by FT-IR to have polyphenol as a main functional colorant in plants, while the existence of phlorotannins through the UV-spectrum method was also confirmed. The fabric was optimized for maximum dye uptake at a temperature of 80℃ for a duration of 50 minutes along all dye concentrations. The dyed fabric showed a hue of Yellow Red under all dyeing conditions while additional color tones, such as grayish and dark, were generated through mordanting and pH adjustment. Both good sun-protective properties and a positive deodorization rate were also recorded, with more than 20% (owf) Ecklonia cava extract on silk fabric. These results imply that Ecklonia cava has great potential to be used as an eco-friendly natural dye and in fashion goods with skin-health functions made of silk.

Dyeing and Fastness Properties of Oak Veneer Dyed with Vinyl Sulfone Type Reactive Dyes (비닐술폰형 반응성 염료를 이용한 오크 무늬목의 염색성 및 견뢰도 특성)

  • Cho, Hang Sung;Shim, Euijin
    • Textile Coloration and Finishing
    • /
    • v.34 no.4
    • /
    • pp.234-240
    • /
    • 2022
  • Use of processed timber can help reduce environmental damage and the economic burden of resources (important problems with use of raw timber) and can meet the needs of various fields where the sensibility of raw timber is required. Veneer wood is positioned as a high-value-added product due to its luxury and beauty, and it is used in various fields as a building-related material, such as interior decoration, furniture, flooring, building interior materials, and lumber. Dyeing is necessary to enhance the aesthetic appearance of this pattern and to expand its use. Therefore, in this study, we compared and analyzed the dye ability of oak-patterned materials with reactive dyes, and evaluated their performance as interior materials. As a result, the oak pattern was dyed with 9 kinds of reactive dyes and a comparative analysis was performed. The most suitable conditions are 50℃, 2 hours, and 0.5% o.w.f. In addition, evaluating resilience to daylight, resilience to rubbing, fire resistance, and flame retardance, yielded results suitable for use as an interior material. In this study, the dyeability of veneer dyed under various conditions using reactive dyes was compared and analyzed the performance as an interior material was evaluated.

The Dyeability and Antimicrobial Activity of Cotton Fabric Dyed with Sophora Radix Extracts on Skin Microorganisms (고삼 추출액를 이용한 염색 면포의 염색성와 피부 미생물 억제효과)

  • 박선영;남윤자;김동현
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.26 no.3_4
    • /
    • pp.464-472
    • /
    • 2002
  • The aim of this study was to elucidate dyeability and antimicrobial activity of cotton fabrics dyed with Sophora Radix extracts according to various mordants. Dyes were extracted from Sophora Radix using ethanol. Then, cotton fabrics were dyed with extracts two times by post-mordanting method in which the extract was 60% (owf, the mordant was 3% (owf), L.R was 1:20, the temperature was 60~7$0^{\circ}C$, the time of dyeing was 60min., and the time of mordanting was 60min.. The dyeability was evaluated by surface color and color fastness. The skin microorganism was evaluated on S. sureus, B. subtilis, S. epidermidis, P. acnes, P. aeruginosa, E. coli, A. niger, C. albicans and T. mentagrophytes. The results are as follows; 1. When mordants were treated, surface color was 3.3Y to 0.1 GY in H (hue) value which indicated greenish yellow to yellow 2. The color fastness to perspiration, dry-cleaning, rubbing, and washing stain fabric showed 4~5 degree. The color fastness to light was improved to 4 degree by treatment of mordants. The color fastness to washing was 2 degree which was somewhat poor. 3. Cotton dyed with ethanol extracts was excellent on S. aureus, B. subtilis, S. epidermidis and p. antis. But that showed poor antibacterial activities on P. aeruginosa and E. coli such as gram negative baterials 4. Antibacterial activity of cotton fabrics dyed didn't be improved by treatment of mordant 5. Antifungal activity of cotton dyed with ethanol extracts was excellent on T. mentagrophytes. Especially, on T. mentagrophytes there was no growth of fungus during 72 hours in cotton dyed mordanting with SnCl$_2$.$_2$$H_2O$.

The Dyeing Properties of Woody Fiber Regenerated from Waste MDF by Reactive Dyes (반응성염료에 의한 폐MDF 재생 목질섬유의 염색특성)

  • Ju, Seon-Gyeong;Roh, JeongKwan
    • Journal of the Korean Wood Science and Technology
    • /
    • v.47 no.2
    • /
    • pp.163-177
    • /
    • 2019
  • This study aims to review the relations between the dyeing conditions (i.e., dye concentration, addition amounts of salt and alkali, and dyeing temperature) and dyeing properties and color fastness to light for identifying the optimal dyeing conditions when dyed regenerated woody fibers were obtained through the defibration of waste medium density fiberboard (MDF) using reactive Red H-E3B (Bis-monochlorotriazine (MCT)/MCT type) and reactive Red RB133% (Bis-MCT/Vinyl sulphone type). The dyeing yield (K/S) obtained using two types of reactive dyes increased as the dye concentration increased by 1-10% (on the weight of fiber (OWF)). In addition, the K/S of H-E3B was higher than that of RB133% irrespective of the dye concentration. The color difference of H-E3B after ultraviolet (UV) radiation was lower than that of RB133%, denoting good resistance to discoloration by UV. As the amount of sodium sulfate increased, the color difference and K/S also increased, and the adequate salt content was determined to be 50-70 g/L. Further, the color difference and K/S significantly increased only the addition of 2 g/L of sodium carbonate; however, almost no difference was observed when more than 2 g/L of sodium carbonate was added. The addition amount of sodium carbonate was adequate 5-10 g/L to dyeing the fiber and the pH at this addition level was 10. The dyeing yield of H-E3B increased when the dyeing temperature increased; however, it subsequently decreased after the dyeing temperature became $80^{\circ}C$. The dyeing yield of RB133% was almost the same up to $60-70^{\circ}C$ but declined subsequently. Thus, the adequate temperatures were $80^{\circ}C$ and $60^{\circ}C$ for H-E3B and RB133%, respectively. If the waste MDF woody fiber was dyed under the aforementioned optimal conditions, dyed regenerated woody fiber can be obtained having the following colors: 1.5 to 2.0R with the H-E3B dye and 9.6 to 10.0 PR with RB133%.

Effect of Dyeing Bath, Mordant and Chitosan Treatment on the Dyeing of Natural Cellulose Fiber Using African Marigold(Tagetes erecta L.) Petals Extract (African marigold(Tagetes erecta L.) 생화(生花) 추출물(抽出物) 염색(染色)에서 염욕(染浴)의 pH, 매염제(媒染劑,), Chitosan 처리(處理)가 섬유소섬유(纖維素纖維)의 염색성(染色性)에 미치는 영향(影響))

  • Kim, Kyung-Sun;Jeon, Dong-Won;Kim, Jong-Jun
    • Journal of Fashion Business
    • /
    • v.11 no.1
    • /
    • pp.136-148
    • /
    • 2007
  • African marigold is a common plant easily available in many flower beds. It has been reported as a practical and prospective resource of dyes since the dyes can be extracted from their bodies as well as petals. In this research, cotton and ramie fabrics which are made from natural cellulose were dyed using the extract of the African Marigold which is a variety of marigold. Dyeing tests were carried out under different pH of the dye solution and mordants. Dyeability was evaluated by examining and measuring surface color, K/S value, and the changes in the maximum absorption wavelength. The probability of improving dyeability was investigated by pre-mordanting with pre-treated chitosan. For the dyeing with marigold extract, the color tone did not differ by pre-mordanting and non-mordanting. Reaction with post-mordanting was excellent, which was colored in various yellow series. The best dyeability was achieved in dye solution of pH 6.5-7.0 which is not conditioned. The largest K/S value and color difference were obtained in tin mordanting. The dye uptake was greatly increased in chitosan pre-treated mordanting compared with the post-mordanting without chitosan pre-treatment. Due to its high heat resistance, African Marigold extract is easy for dye extraction and dyeing, and its dyeability is excellent for natural cellulose fibers. Also, colorfastness was proved to be practically usable.

The Characteristics of Persimmon Juice Dyeing Using Padding and UV Irradiation Method (Part I) -Color and Properties of Persimmon Juice Dyed Cotton Fabrics- (패딩과 자외선 조사법을 이용한 감즙 염색 특성(제1보) -감즙 염색 면직물의 염색성과 물성-)

  • 한영숙;이혜자;유혜자
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.28 no.6
    • /
    • pp.795-806
    • /
    • 2004
  • Unripe indigenous persimmons which contain rich tannins have been used as natural dye materials traditionally and have been using continuously for dyed clothes named Gal-ot in Jeju. Those persimmons were cheap and easy to use as dyes because of inedible and widely cultured in Korea. Persimmon juice dyes not only make fabrics brown-color but also give functional and hygienic properities such as stiffness, air ventilation of clothes, antibacterial activity, protectivity against ultraviolet light. However there are several serious problems which are ristriction of dyeing periods, longtime irradiation, uneven color and low color fastness etc. in persimmon juice dyeing. This study purpose to improve dye effect and method in order to enlarge useability of persimmon juice dyeing. Cotton fabrics were pad-dyed to 100% pick-up using padding machine after dipping in persimmon juice extracted from unripe persimmons indigenous from Jeju. It was possible and available to control pick-up rate. The color of dyed cotton fabrics by padding method was more even and repeatable than which by traditional hand method. Persimmon juice concentrations were 4 types of 10, 25, 50 and 100%. The more concentration increased, the more color deepened. UV Irradiation instead of sunlight was applied to color developing. Irradiation times were shortened till 1∼8 hrs. Same color values could be taken without water wetting which were required in sunlight irradiation. Tensile strengths of cotton fabrics pad-dyed with low concentration of persimmon juice decreased but recovered at high concentrations. Elongations(%) of cotton fabrics pad-dyed with persimmon juice were increased 1% more than undyed cotton in sunlight irradiation. Drape stiffness increased upto double times as much as.

Preliminary Study on Desizing and Dyeing Using Low Temperature Plasma (저온 플라즈마를 이용한 호발 및 염색 선행연구)

  • Bae, Paek-Hyun;Jo, Hun-Je;Kim, Hyo-Jin;Lee, Yeon-Hee;Park, Sung-Min;Kim, Jeong-Gyu;Jung, Jin-Ho
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.27 no.9
    • /
    • pp.946-951
    • /
    • 2005
  • In this wort plasma treatment was evaluated as an alternative clean desizing technology. Size materials such as PVA(polyvinyl alcohol), PACL(polyacrylic acid esters) and their mixture on PET(polyethylene terephthalate) fabrics were treated by $N_2$ and $O_2$ plasma. $O_2$ plasma was more efficient in size removal than $N_2$ plasma, and the removal of PVA was higher than that of PACL. SEM(scanning emission microscopy) pictures of the plasma treated samples directly proved the disappearance of sizing agents. After $O_2$ plasma treatment, the PET fabrics were subjected to conventional desizing process. Compared with untreated fabrics, the desizing effluent from the treated fabrics gave lower TOC, COD and $BOD_5$ values. This indicates plasma treatment not only serves to directly remove sizing agents but also offered several advantages by changing the chemical properties of sizing agents. Lastly, the effect of plasma desizing process on dyeing was examined using color difference and dyeing fastness tests. The CCM(computer color matching) results showed rotor difference between PET fabric desized by $O_2$ plasma treatment for 20 min and reference PET fabric desized by the conventional wet desizing process was around 1. This suggests the treated PET fabric can be directly subjected to dyeing process without any additional process. The plasma treated fabric also gave a good result of dyeing fastness so that grades of laundering, crocking, heat and light fastness were same or even better than the reference PET fabric did.

Natural Dyeing of Hanji with Alnus japonica Fruit Extractive (오리나무 열매 추출물을 이용한 한지의 천연염색)

  • Choi, Tae-Ho;Yoo, Seung-Il;Lee, Sang-Hyun;Jeong, Hee-Won;Yang, Eun-Jung
    • Journal of the Korean Wood Science and Technology
    • /
    • v.37 no.4
    • /
    • pp.414-420
    • /
    • 2009
  • We dyed traditional Korean hand-made papers (Hanji) with colorants extracted from fruits of Alnus japonica to investigate the effect of various dyeing factors (mordant, dye concentration and dyeing assistant) on colors, K/S values and light fastness of the dyed Hanji. The dyed hanji had brown color. The K/S value of dyed Hanji was increased by mordanting with alum and copper acetate. $a^*$ and $b^*$ value of dyed Hanji was decreased slightly by mordanting with alum and Iron(II) chloride. The K/S value and $b^*$ of dyed Hanji increased with increasing concentration of dye, but $L^*$ value of dyed Hanji decreased. The K/S value of dyed Hanji was also increased by fixing agent. When Hanji was mordanted with Iron(II) chloride and was not mordanted, use of fixing agent resulted in greater increase of K/S value. Use of fixing agent resulted in poor light fastness. When fixing agent was used, mordanting with copper acetate resulted in smaller color difference than mordanting with alum after aging test.