• Textile Coloration and Finishing
• /
• v.26 no.3
• /
• pp.263-271
• /
• 2014

The purpose of this study is to investigate the dyeability of silk fabrics with Humulus japonicus (Hwansam) extract which is a kind of weeds that grows wild in the suburbs. In the research, the general extract method was conducted with the extract from fresh herb of root-removed Humulus japonicus while we investigated the optimal dyeing conditions and dyeability depending on the changes of the kind of mordants, methods and temperature. The functional properties such as antibacterial activities, deodorization and UV protection were also reviewed. The ideal output, as a result, was shown at 100% of dye concentration, $90^{\circ}C$ of dyeing temperature and 40 minutes of dyeing time while in terms of dye uptake depending on the kind of mordants and methods, it was found that among four mordants of $SnCl_2$, $AlK(SO_4)_2$, $CuSO_4$, and $FeSO_4$ post-mordanting with $FeSO_4$ showed the best result. Color fastness to washing, dry cleaning and rubbing was found strong at grade 4-5 and the grade to light was as good as 3 while to perspiration was good at 4-5 as well. In aspects of functional properties, it showed excellent results of 99% deodorization rate, 98% UV protection rate and 99.9% bacterial reduction against Staphylococcus aureus.

• Textile Coloration and Finishing
• /
• v.26 no.3
• /
• pp.159-164
• /
• 2014

Biodegradable Poly(butylene succinate), PBS, was photooxidized by UV/ozone irradiation and the effect of UV energy on the surface properties of the UV-irradiated PBS film were investigated by the measurement of reflectance, surface roughness, contact angles, chemical composition, and zeta potential. With increasing UV energy, reflectance decreased in the visible and ultraviolet regions particularly at the wavelength of 380nm. The irradiation produced nano-scale surface roughness including the maximum peak-to-valley roughness increased from 106nm for the unirradiated sample to 221nm at the UV energy of $10.6J/cm^2$. The improved hydrophilicity was due to the higher $O_{1s}/C_{1s}$ resulting from the introduction of polar groups such as C-O and C=O bonds. The surface energy of the PBS increased from $42.1mJ/m^2$ for the unirradiated PBS to $56.8mJ/m^2$ at the irradiation of $21.2J/cm^2$. The zeta potentials of the UV-irradiated PBS also decreased proportionally with increasing UV energy. The cationic dyeability of the PBS increased accordingly resulting from the improved affinity of the irradiated PBS surfaces containing photochemically introduced anionic and dipolar dyeing sites.

• Textile Coloration and Finishing
• /
• v.28 no.3
• /
• pp.195-207
• /
• 2016

In this study, we examined the influence of the pigment characteristic and dyeing condition on dyeing properties and functionality by using Perilla Frutescens L. Britt extracts, in which ethanol, distilled water and NaOH solution were used as 3 different solvents. Changes in dyeing conditions include variations in dye concentration, dyeing temperature, time and pH on dye uptake, and K/S values were compared according to these changes. Additionally, color changes were observed according to the use and types of mordant. Ultraviolet-visible spectrum was utilized to investigate the pigment characteristic, and as a result, chlorophyll was identified in ethanol extract, whereas tannin was identified both in distilled water extract and NaOH solution extract. By using FT-IR analysis, these tannins in distilled-water-extract and NaOH solution extract were verified to be hydrolyzable tannin. When dyeing silk, dye uptake increased as dye concentration, dyeing temperature and time increased, while it decreased as pH of the extract increased. Fabrics dyed without a mordant produced Y-series colors, and fabrics dyed with mordants showed various colors depending on the mordant types. Even though color fastness to washing and light was unsatisfactory, fastness to rubbing and perspiration showed relatively high grade. Moreover, deodorant ability of dyed fabric improved.

• Journal of Fashion Business
• /
• v.10 no.2
• /
• pp.18-26
• /
• 2006

In this study, the effects of chitosan pre-treatment on the mordanting effect and dyeability were investigated in the dyeing using Japanese pagoda tree. The chitosan treatment effects were evaluated mainly focused on the colors after dyeing of cotton and nylon fabrics which were treated with acidic aqueous solution of chitosan. In the case of chitosan untreated fabrics, the mordanting effects on the cotton and nylon were insignificant and the dyeability was very low. Regardless of the mordant types(Al, Sn, and Fe), the dyed fabrics exhibited almost identical yellowish colors. In the case of chitosan treated fabrics, dark colors were obtained compared to the case of chitosan untreated and ${\Delta}E$ values were increased significantly. In cotton fabrics, the most excellent result was obtained under the condition of unmordanted and chitosan treated fabrics. This verifies the fact that routin coloring matters establish direct linkages with the chitosan components, which exhibit cationic nature, easily. In nylon fabrics, the effects of mordanting treatment and chitosan treatment are so insignificant that the routin coloring matters are presumed to establish direct dyeing with the nylon molecular chains.

• Textile Coloration and Finishing
• /
• v.24 no.2
• /
• pp.113-120
• /
• 2012

Jacquard floor covering could be prepared from low-melting/regular sheath-core hybrid polyester, where the fiber is dyed in yarn state. With regard that the expected high shrinkage of the hybrid polyester in water makes problems in yarn dyeing, low-temperature dyeing properties of the hybrid polyester were studied. The rate of shrinkage of low-melting hybrid polyester exceeds 9% in hot water above $90^{\circ}C$, at such condition, cheese yarn dyeing is very difficult. Although disperse dyes exhaust in a relatively high speed on low-melting hybrid polyester, diffusion of these dyes to the core regular polyester was extremely slow under $90^{\circ}C$. Foron Blue E-BL 150, an anthraquinone E-type disperse dye, showed appreciable diffusion after 48hrs dyeing at $90^{\circ}C$. The fastness to rubbing and drycleaning were improved by one grade after reduction cleaning.

• Textile Coloration and Finishing
• /
• v.21 no.6
• /
• pp.29-38
• /
• 2009

Natural dyes seem to be more profitable on human and environment, and recently they could be considered as a better alternative to synthesized dyes. The aim of the current work was to investigate the dyeing property and antimicrobial activity of commercial cotton fabrics dyed with kumazasa (usually called in japan) which is known as conventional japan bamboo leaves. Actually, the dyeability and antimicrobial property of dyed fabric with natural mordant/dyeing was compared with synthetic mordant/dye process. The results of this study obtained are as follows. The apparently colour of kumazasa leaves extract dyed fabrics showed with light green or slightly yellow-green. In colorfastness to washing, ${\Delta}E$ and K/S values of dyed fabrics with natural chitosan as mordant used was shown to be more excellent results, than was synthetic mordant used. However, the decrease rate was recorded nearly 50% when washing repeated 20 cycles. In result of antimicrobial effect for bacteria, the dyed fabrics didn't show the significant antimicrobial activity to the both dyed with and without mordant. Results of this investigation considered that low-cost, natural, bio-mordant are relatively effective in natural coloration.

• Fashion & Textile Research Journal
• /
• v.12 no.3
• /
• pp.381-388
• /
• 2010

The purpose of this study was investigate the dyeing property on chitosan crosslinked cotton fabric with cochineal at variable conditions. Chitosan crosslinked cotton fabrics were manufactured by crosslinking agent epichlorohydrin in the presence of chitosan. Chitosan crosslinked cotton fabrics dyed using cochineal were post-mordanted using Al, Fe and Cu. The dyeability(K/S) of chitosan crosslinked cotton fabrics were measured by computer color matching. Additionally the fastness to washing and light were also investigated. The dye-uptake of chitosan crosslinked cotton fabrics increased with the dyeing time. The saturated dyeing time was about 20minutes at $60^{\circ}C$. The dyeability(K/S) was remarkably increased with increasing content of crosslinked chitosan because of having a amine group of chitosan. Chitosan crosslinked cotton fabrics were dyed yellowish red by non and Fe mordanting, blueish red by Al and Cu mordanting, respectively. The washing and light fastness were increased by mordanting, especially Cu and Fe mordanting.

• The Korean Journal of Community Living Science
• /
• v.16 no.1
• /
• pp.65-72
• /
• 2005

To increase dyeability of cotton fabric to the chestnut shell dyeing, we had several dyeing experiments with the experimental fabrics which was pre-treated by soybean, NaOH, KOH. Three kinds of experimental cotton fabrics were used and chestnut shell dyebath was made for the experiment. Munsell's color HV/C and color differences ΔE of dyeing fabrics were compared between pre-treatment and none pre-treatment dyeing fabrics. The main results were as follows ; Color differences of dyeing fabrics pre-treated with soybean, NaOH, KOH were higher than those of none pre-treated dyeing fabrics. In case of pre-treatment with soybean, the concentration of the soybean bath affected the color differences but not affected in case of pre-treatment with NaOH & KOH. Munsell's color of pre-treatment fabrics with soybean, NaOH, KOH were same with the none pre-treatment fabrics. Colorfastness of the pre-treated fabrics were same degree, but only in case of soybean pre-treated fabrics were low in fastness of washing(change) & perspiration(acidic change).

• Journal of Fashion Business
• /
• v.16 no.2
• /
• pp.138-150
• /
• 2012

Nano Inkjet DTP technology, a new technology introduced recently, can be applied to various types of fabric, and pre-treatment process can be omitted, which makes the whole printing process compact. Some important factors for DTP are color difference between the color selected by the designer on PC and the color on the final product and durability of the final fabrics. In this study, the twenty-three trend colors of 2012-2013 F/W suggested by PeclersParis have been picked to be printed on cotton, silk and polyester fabrics, then K/S and ${\Delta}E$ value and color fastness were measured. The results show that dyeability of fabric is varied for each color group, and that also tone of color affect to dyeability when measured for colors in the same group. In general, for all fabric, light fastness, washing fastness and color fastness to sublimation are outstanding. However, because of poor rubbing fastness, additional treatment to fix colorant on fabric is required.

• Journal of the Korean Home Economics Association
• /
• v.50 no.2
• /
• pp.85-92
• /
• 2012

This was a study examining the fatliquoring of natural dyed cow skin with Coptis chinensis Franch. The K/S according to optimal dyeing condition, mordants and mordanting method was measured. And the surface, sections, tensile strength, elongation, stiffness and colorfastness according to post-dyeing fatliquoring were observed. The optimal conditions include 300%(o.w.f.), $50^{\circ}C$, 30 minites. Fe-simmordanting showed the highest dyeability. Coptis chinensis Franch showed a yellow color regardless of mordants and mordanting methods. Tensile strength and elongation increased in the case of simmordanting compared with untreated and the process of fatliquoring further increased. The softness significantly increased when fatliquored. Shrinkage was slightly reduced when dyed, but showed almost no change with fatliquoring. Lastly, color fastness increased overall with mordanting and partly increased with fatliquoring. The rubbing and light fastness were excellent Cu- mordanting, and drycleaning fastness also improved with Cr-mordanting.