• Textile Coloration and Finishing
• /
• v.27 no.2
• /
• pp.113-118
• /
• 2015

Poly(vinyl butyral), PVB was photooxidized by UV/ozone irradiation and the effect of UV energy on the surface properties of the UV-irradiated PVB film were investigated by the measurement of reflectance, surface roughness, contact angles, elemental composition, and zeta potential. With increasing UV energy, reflectance decreased in the visible and ultraviolet regions particularly at the wavelength of 400nm. The irradiation produced nano-scale surface roughness including the maximum peak-to-valley roughness increased from 274nm for the unirradiated PVB to 370nm at the UV energy of $5.3J/cm^2$. The improved hydrophilicity was due to the higher $O_{1s}/C_{1s}$ resulting from the introduction of polar groups such as C=O bonds. The surface energy of the PVB film increased from $35.3mJ/m^2$ to $39.3mJ/m^2$ at the irradiation of $15.9J/cm^2$. While the zeta potentials decreased proportionally with increasing UV energy, the cationic dyeability of the PVB increased accordingly resulting from the improved affinity of the irradiated PVB surfaces containing the photochemically introduced anionic and dipolar dyeing sites.

• Fashion & Textile Research Journal
• /
• v.10 no.4
• /
• pp.544-551
• /
• 2008

In this study, the colorants of Amur cork tree were extracted with boiling water. Chitosan crosslinked cotton fabrics have been dyed with aqueous extract of Amur cork tree and their dyeabilities on the fabrics were studied. Additionally the fastness to washing and light were also investigated. Cotton fabrics were treated with a crosslinking agent epichlorohydrin in the presence of chitosan to provide the cotton fabrics the dyeing properties of natural dye(Amur cork tree) by the chemical linking of chitosan to the cellulose structure. This process was applied by means of the conventional mercerizing process. The chitosan finishing and durable press finishing of the cotton fabrics occurred simultaneously in the mercerization bath. On the surface color change, the fabric of no-chitosan finished and no-mordanted has greenish yellow. The more crosslinked chitosan on cotton fabrics has the more turned down greenish on the surface color, as increasing the concentration of chitosan, greenish color turn down to the yellow close the 90o hue angle. In all sorts of fabrics, dyeability(K/S) is slightly affected by the number of manufacturing process and the concentration of chitosan. But only mercerized cotton fabric has higher dyeability (K/S) than mordant treated cotton fabrics. Wash fastness has little different results by each condition, but almost similar values. Light fastness was improved with chitosan treatment on cotton fabric.

• Fashion & Textile Research Journal
• /
• v.11 no.5
• /
• pp.818-826
• /
• 2009

Dyeability of microbial violacein produced from Chromobacterum violaceum CV107 on to multifiber fabrics has been studied. The bluish-purple colourants were produced by cultivation of Chromobacterum violaceum using LB liquid medium for 2 days. The colourant was extracted with 80% acetone and identified as violacein by LC/MS analysis. The violacein could be dyed on not only natural fibers such as Cotton, Silk and Wool but also synthetic fibers such as Diacetate, Triacetate, Creslan 61 and Nylon 66. Maximum K/S values were shown at 540-580 nm according to different fiber with color appearance of purple or blue. An optimum pH and temperature under dyeing condition were 10 and $70^{\circ}C$, respectively. Any mordants were not improved colour density and quality on various fabrics. From this studies, pigments produced microbe have a high potentials for natural dyeing on fabrics. Finally, development of new colourants from microbe has made a possible change for new dyeing field in respects of eco-friend and repeatability of natural dyeing for apparels.

• Textile Coloration and Finishing
• /
• v.21 no.2
• /
• pp.22-28
• /
• 2009

Human hair is a kind of fibrous keratin which has much cystine residues like wool fiber. It protects human head from the dangerous shock and is an organ to release heavy metals in human body. Recently, in many dyeing field there is a trend to utilize the natural dyes. Cochineal is a reddish natural mordant dye. When the cochineal is applied in human hair dyeing, it is expected that dyeing rate will be slow and wash fastness will be poor on account of large molecular weight relative to oxidative dyes. In this work, we investigated the effects of tributyl phosphate in hair dyeing with natural dye cochineal. Dyeability of hair increased significantly by adding tributyl phosphate in cochineal dyeing. Nevertheless the hair was slightly damaged during dyeing, the dyed hair showed a good wash fastness.

• Fashion & Textile Research Journal
• /
• v.8 no.2
• /
• pp.233-238
• /
• 2006

This research confirmed the chemical structure of Curcumine and Carthamin pigments whose pigments were separated and refined from the Curcuma longa and Carthamus Tinctorious which were natural dye using FT-IR, HPLC and so on. The cotton and the silk fabrics were dyed using a main pigment and then this research obtained the conclusion as it follows. The curcumine, the main pigment of Curcuma longa extracted from the mixed solvent of acetic anhydride and methanol ($CH_3OH$), had the maximum absorption wavelength at 504.0 nm and was confirmed as yellow natural pigment. The Carthamin, the main pigment of Carthamus Tinctorious extracted from the mixed solvent of dichloromethane and methanol, had the maximum absorption wavelength at 420.0nm. This pigment was confirmed as yellow natural pigment. The dyeing property of the main pigment about the silk fabrics was superior to that about the cotton in both the Curcuma longa and Carthamus Tinctorious, and the dyeing property of Carthamus Tinctorious was superior to that of Curcuma longa.

• Fashion & Textile Research Journal
• /
• v.11 no.2
• /
• pp.337-343
• /
• 2009

This study systematically investigated a method for extraction of safflower (Carthamus tinctorius Linnaeus) colorants by ultrasonic treatment. Compared to pigments productivity and cell wall structures of safflower after general and ultrasonic method, the ultrasonic method showed high extraction efficiency of safflower pigments due to destruction of safflower cell wall caused by high vibration energies. Microscopic analysis confirmed the hypothesis that the ultrasonic treatment of safflower caused its cell wall structure loosened and made efficient extraction of safflower pigments. And also, LC-MS/MS analysis revealed that productivities of the yellow and red safflower pigments by ultrasonic method were 21.9% and 14.6% higher, respectively, than those of pigments extracted by general method. The ultrasonic extracted yellow and red colorants could be used to dye not only natural fibers like cotton, silk and wool, but also synthetic fiber like nylon, and generally gave a better color tone than the general extracted colorants from safflower due to the affinities of red and yellow colorant on different fibers. As the yellow and red colorant were extracted by ultrasonic treatment in water, the K/S value on of 550/440nm of cotton and rayon was increased but in the case of silk and wool the change of this value was almost not detected. Finally, this technique might provide a solution to establish reproducibility and standardization for the extraction and dyeing methods on fabrics.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.2
• /
• pp.222-229
• /
• 2009

The natural dyeing of cotton fabrics with Rumex crispus L. root extract was investigated. The dyeability of Rumex crispus L. root extract was evaluated with conditions of concentration, temperature, time, repeat-numbers, pH, mordants variables, methods of mordanting, color fastness and antibacterial activity, etc. The maximum V-visible spectrum possessed absorption band of Rumex crispus L. extract appeared at 274nm and 336nm. The amount of dyes extracted was increased with extracting concentration, temperature and time. The K/S value increased with increasing dyeing concentration and repeat-numbers. The K/S value increased with increasing dyeing temperature and time, the exhaustion was saturated in $90^{\circ}C\;and\;80min$, respectively. Surface colors of fabrics dyed with pH 3, 7, 11 extract were RP-R-YR-Y range. The light fastness and washing fastness showed good results in Fe-mordanted. The dry leaning fastness appeared more than 4 grade. Rubbing fastness was better in dry methods han that in wet methods. In the result of antibacterial activity, the decrease rate was 9.9% to Staphylococcus aureus with the dyed fabric of cotton.

• Journal of Fashion Business
• /
• v.15 no.2
• /
• pp.120-130
• /
• 2011

This study is a fundamental research on the natural Polygoum tinctoria dyeing to quantify scientifically and satisfy the reproducibility of the procedure. By dyeing the silk fabrics, the establishment of accurate dyeing method was sought. At the same time, we tried to modify the traditional dyeing methods, broaden the methods, and apply the dyeing variously. The dyeability and color changes were compared and reviewed according to the changes in the reducing temperature, reducing time, concentration of the reducing agent, dyeing temperature, dyeing time, concentration of NaOH, and the number of repetition of dyeing. The optimum conditions in the dyeing procedure are as follows: Added concentration of the reducing agent is 3g/${\ell}$. Reducing temperature is $60^{\circ}C$. Reducing time is 40minutes. Dyeing temperature is $30^{\circ}C$. Added concentration of NaOH is 1g/${\ell}$. Dyeing time is 30minutes.

• Textile Coloration and Finishing
• /
• v.10 no.1
• /
• pp.1-10
• /
• 1998

The objectives of this study were to investigate the effects of mordants and dyeing method : on the dyeability and color fastness of the fabrics with the extract from Gardenia. The following results were drawn from the data obtained. 1. The wavelengths of the strongest absolution bands of Amur cork tree, Gardenia extract was 440nm respectively and the wavelengths 440-460nm after the mordants were added in the color extracts(The bands of Gardenia extract shifts to short wavelength side as pH increased.). In all cases, the abosorbancies were increased. 2. The main color substances in extract from Gardenia were expected to be cretin respectively by spectrophotometric and HPLC studies. 3. As to the concentration of color extract for dyeing, about 20g/L was the optimum concentration to dye silk and cotton fabrics with extract. 4. For silk and cotton fabrics dyeing with Gardenia extract, $SnCl_2$ was the best mordants. The K/S values of dyed fabrics were increased gradually as the concentration of mordants increased, and the highest K/S values were obtained at 5-10%. When using the mordanting methods, silk fabric by premordanting and cotton fabric by synmordanting had a greater effect K/S value. 5. The color fastness of fabrics dyed with Gardenia extract against dry cleaning, washing, rubbing and perpiration was improved 1 level or so but light fastness was remained 1 level showing without any effect.

• Textile Coloration and Finishing
• /
• v.23 no.2
• /
• pp.76-82
• /
• 2011

Ultra High molecular weight polyethylene(UHMWPE) films were photooxidized by UV/ozone irradiation. Reflectance of the irradiated films decreased in the low wavelength regions of visible light, indicating destructive interference of visible light due to roughened surface. The UV treatment developed the nano-scale roughness on the UHMWPE films surface, which increased by two-fold from 82.6 to 156.6nm in terms of peak-valley roughness. The UV irradiation caused the oxygen content of the UHMWPE film surface to increase. Water contact angle decreased from $83.2^{\circ}$ to $72.9^{\circ}$ and surface energy increased from 37.8 to 42.6mJ/$m^2$ with increasing UV energy. The surface energy change was attributed to significant contribution of polar component rather than nonpolar component indicating surface photooxidation of UHMWPE films. The increased dyeability to cationic dyes may be due to the photochemically introduced anionic and dipolar dyeing sites on the film surfaces.