• 한국의류학회지
• /
• 제26권1호
• /
• pp.124-132
• /
• 2002

Dyeing properties of silk fabric on gromwell roof colorants were studied for the effect of dyeing conditions, such as methanol ratio, colorants concentration, pH, temperature and time etc. on the dye uptake and effect of mordants and mordanting methods on color change and dye uptake. And various colorfastnesses of dyed fabrics were evaluated far practical use. Gromwell colorants showed high affinity to silk and its isotherm adsorption curve was Freundlich type close to Nernst type. Therefore, it is considered that hydrogen bonding and Van der Waals force were involved in the adsorption of cromwell colorants to silk fabric. Post-mordanting method gave higher K/S value than other methods, but it was not significantly different color values from unmordanted one. Gromwell colorants produced mainly R and RP color depending on mordants and mordanting method. Dyed fabrics showed high colorfastness irrespective of mordanting treatment. Light colorfastness was increased for repeatedly dyed and Fe mordanted dyed fabrics.

• 한국염색가공학회지
• /
• 제11권5호
• /
• pp.13-21
• /
• 1999

In this study, selected cotton fabrics and polyester/cotton(P/C) blended fabrics are treated with a soluble polyurethane(SPU) and then, printed by heat transfer to determine the effect of SPU treatment on dye uptake of the samples. The results obtained are as follows： 1) In heat transfer, dye-uptake gets higher in Vopotion to temperature and time. The optimum printing temperature and printing time of C.I. Disperse Orange 3 and C.I. Disperse Violet 1 are $200^\circ{C}$ and 50sec. 2) Dye-uptake gets higher according to SPU concentration ; both cotton and P/C fabrics show the highest at $100g/\ell$. 3) In color, as temperature, time and SPU concentration increase, P/C fabrics show more yellowish orange color than cotton fabrics in case of C.I. Disperse Orange 3 and P/C fabrics show more reddish violet color than cotton fabrics in case of C.I. Disperse Violet 1. 4) All fastness of cotton and P/C fabrics treated with SPU are good, but color fastness to washing and water of cotton fabrics treated with SPU are not good.

• 복식문화연구
• /
• 제24권6호
• /
• pp.777-787
• /
• 2016

This study was carried out in order to provide useful data for planning fabrics of summer eco-friendly fashion products. The fabrics used in this study were four cellulose fibers: cotton, cotton/mulberry blended, flax, and flax/lyocell blended. Dyeing with natural indigo was carried out under three different reducing conditions (i.e., general, eclectic, and eco-friendly) that have different reducing agent and pH levels, and hydrosulfite and glucose were used as a reducing agent. The dye uptake (K/S value) of fabrics dyed with natural indigo by a reducing condition was the highest at 660nm. Regardless of the fabrics, dye uptake was the highest under the general reducing condition and the lowest under the eco-friendly reducing condition. Under different reducing conditions, the dye uptake of natural indigo fabrics with the maximum absorption wavelength indicated a difference. The colorfastness of cellulose fabrics that were dyed with natural indigo had a rate of 4 to 5 except for rubbing fastness, which indicated good colorfastness. Additionally, natural indigo-dyed cotton and flax fabrics had good antibiosis. When the color characteristics of fabrics dyed with natural indigo were measured, all of the three reducing conditions created purple blue (PB) colors, and the color characteristics of dyed fabrics by reducing condition and fabric showed significant differences.

• 복식문화연구
• /
• 제12권5호
• /
• pp.781-791
• /
• 2004

Currently, as mordants, heavy metals are being used in dyeing process in order to improve dye uptake and dye fastness. These chemicals, however, are mostly harmful to human body and the environment along with the pollution by effluent. Traditionally, rice straw ash solution, lime, etc. have been used as mordants in order to improve the effects on dye uptake and color fastness of dyestuffs. The study of natural mordants would, therefore, be vital to the development and succession of our traditional dyeing methods. In this study, as a preliminary step toward the use of rice straw ash solution for the nautral dyeing using Caesalpinia sappan, several aluminum compounds were employed as mordants. When the purified aluminum compounds were used, on the basis of unmordanted cotton fabric, the K/S values of the pre-mordanted and simultaneously mordanted fabrics increased by 2 or 3 times, while those of the post-mordanted fabrics decreased.

• 한국의류학회지
• /
• 제25권7호
• /
• pp.1314-1320
• /
• 2001

Dyeing properties of rosemary colorants on wool fabrics were investigated. Reosemary colorants were characterized by UV and FT-IR analysis. Effect of dyeing condition on dye uptake and effect of mordanting on dye uptake, color change of colorfastness were explored. Rosemary colorants showed high affinity to wool fiber and its isotherm adsorption curve was Langmuir type. Therefore, it was considered that ionic bonding was involved in the adsorption of rosemary colorants to wool fiber. Rosemary colarants produced mainly yellowish color on wool fabric. The dyed wool fabrics showed generally high colorfastness except fastness to washing and light. Mordanting did not improve any colorfastness except that Sn mordant improved the light fastness. Bacterial reduction rate was increased up to 100% at 5% dye concentration. Therefore, antimicrobial activity of rosemary extract was confirmed.

• 한국염색가공학회지
• /
• 제14권2호
• /
• pp.85-85
• /
• 2002

The interaction between berberine and tannin in aqueous solution was investigated spectrophotometerically. The dyeing mechanism of silk fabrics (control and tannin treated silk fabrics) with berberine was based on thermodynamic parameters obtained from equilibrium adsorption experiments. In adsorption spectra of aqueous solution of berberine and tannin mixture two isosbestic points (328nm, 357nm) were found and the mole fraction of reaction of components was 1:1. Initial dyeing rates were increased and the diffusion of dye was more effective by tannin treatment. Without regard to tannin treatment the adsorption isotherm of berberine was the langmuir type except high temperature, 80℃. By tannin treatment the saturation dye uptake was increased, the increase of dye uptake appeared to be a result of entropy change rather than enthalpy change. All these results can be interpreted by the hydrophobic interaction between berberine and silk treated with tannin and it is reasonable to conclude that not only the ionic force, but also the hydrophobic interaction contributes to the binding of berberine and tannin treated silk treated with tannin.

• 한국염색가공학회지
• /
• 제14권2호
• /
• pp.9-17
• /
• 2002

The interaction between berberine and tannin in aqueous solution was investigated spectrophotometerically. The dyeing mechanism of silk fabrics (control and tannin treated silk fabrics) with berberine was based on thermodynamic parameters obtained from equilibrium adsorption experiments. In adsorption spectra of aqueous solution of berberine and tannin mixture two isosbestic points (328nm, 357nm) were found and the mole fraction of reaction of components was 1:1. Initial dyeing rates were increased and the diffusion of dye was more effective by tannin treatment. Without regard to tannin treatment the adsorption isotherm of berberine was the langmuir type except high temperature, $80^\circ{C}$. By tannin treatment the saturation dye uptake was increased, the increase of dye uptake appeared to be a result of entropy change rather than enthalpy change. All these results can be interpreted by the hydrophobic interaction between berberine and silk treated with tannin and it is reasonable to conclude that not only the ionic force, but also the hydrophobic interaction contributes to the binding of berberine and tannin treated silk treated with tannin.

• 한국염색가공학회지
• /
• 제20권4호
• /
• pp.53-59
• /
• 2008

For the modification of wool surface, wool fabrics treated with oxygen low-temperature plasma(LTP) and dichloroisocyanuric acid(DCCA) were dyed with milling type acid dye. The difference of dyeing properties on modified and control wool fabric were investigated. DCCA treated wool showed that saturation dye uptake and dyeing desorption ratio were higher than LTP treated wool. Dyeing transition temperatures of DCCA and LTP treated wool fabrics were 20$^{\circ}C$ degree lower than control wool fabric. In light color fastness test, DCCA treated wool fabric was 1 grade lower than LTP or control wool fabric.

• Fibers and Polymers
• /
• 제7권3호
• /
• pp.250-254
• /
• 2006

Superfine down-powder/viscose blend films were prepared and characterized for their dyeing properties. Down-powder with average size of $2.56{\mu}m$ were suspended in viscose dope and blend films were obtained by solution casting. When the blend films were dyed with acid dye, the dye uptake and K/S values increased with the increase in down-powder content. Amino-acid analyses showed that amino acid component of the down were not affected during the film formation, which confirmed the changes of dye uptake and K/S value.

• 한국가정과학회지
• /
• 제5권2호
• /
• pp.119-127
• /
• 2002

Dyeing properties of the colorants extracted from acorn on wool fabric were investigated. Effects of dyeing temperature, dyeing time, repeating, and pH on dye uptake and colorfastness were explored. Acorn colorants showed very good affinity to wool fiber and produced bright to dark brown color ranged 4.81-8.97YR, 4.46-7.47/1.79-3.35. ,Higher temperature increased dye adsorption, so did longer time and more repeating. Washfastness was fairly good. The Dyed wool fabric had deeper color after irradiation to light. pH had an effect on the development of color, also. Dye uptake and washfastness were higher in acidic and alkaline pH than in neutral pH solution.