• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.3_4
• /
• pp.422-430
• /
• 2002

Dyeing properties of the colorants from gromwell on cotton fabric were investigated. The effects of dyeing conditions on dye uptake and the effects of mordants and mordanting methods on K/S value, color change and colorfastness were explored. Gromwell colorants showed low affinity to cotton fabric, and its adsorption isotherm was Freundlich type close to Langmuir type. Therefore, it was considered that hydrogen bonding and Vander Waals force were involved in the adsorption of gromwell colorants to cotton fabric. Pre-mordanting method except Sn mordant gave higher K/S value but it was not significant. Gromwell colorants produced mainly R and RP color on cotton fabric depending on mordants and mordanting method. Dyed cotton fabric showed generally high colorfastness irrespective of mordanting treatment. Light colorfastness was increased by repeat dyeing and Fe and Sn mordanting.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.80-85
• /
• 2022

In wastewater treatment processes huge quantities of sludge are produced continuously each year. This work investigated the reuse of two types of sludge as biosorbents of a toxic dye. The potential of granular and filamentous fungus dried sludge for the elimination of eosin from aqueous solution was studied in batch system. The effect of initial concentration and temperature was examined. Maximum uptake was observed at 100 mg l^-1 and 30 ℃. The maximum removal rate was 92% for the granular sludge and 90% for the filamentous one. Equilibrium was attained after 30 min for the studied dye concentrations. The equilibrium uptake increased with the initial eosin concentration. The Freundlich and Langmuir adsorption models were also investigated. The reuse of disposed sludge as adsorbent could be a solution for the valorization of such dangerous waste to resolve two environmental problems at the same time.

• Korean Journal of Human Ecology
• /
• v.22 no.5
• /
• pp.461-476
• /
• 2013

This study aims to provide practical information of both color and hands of cotton fabrics dyed with persimmon dye powder for natural dyeing fashion industries by investigating dyeing behavior and color gamut, by testing mechanical properties depending on color characteristics, and finally by evaluating dyeing fastness. As results, the persimmon dye powder obtained by extracting the fruits to final solid powder was found as containing tannin and it partially coated between and on fibers similarly to traditionally dyed one. The K/S values of non-mordanted fabric and two differently mordanted ones with Fe and Cu seemed to reach their equilibrium from 800, 800, and 600% (owf), respectively. Yellow-red was the only one hue shown while tones were various as pale (p), light grayish (ltg), soft (sf), dull (d), grayish (g), and dark grayish (dkg). In mechanical properties, the dyed fabrics with p and ltg tended to be less altered than undyed ones whereas d and d kg by higher bath concentrations could be applied to boxy silhouette owing to their increased stiffness and less stretchability. Although fastness to dry cleaning and stain was good, color change by washing and rubbing needed to be improved.

• Journal of Sericultural and Entomological Science
• /
• v.37 no.2
• /
• pp.161-166
• /
• 1995

Safflower is natural red dye largely used for dyeing on protein and cellulose fabric. It contains safflower yellow and carthamin red. Safflower yellow is water-soluble dye, while carthamin red is soluble in alkaline condition. Therefore the former was extracted by cold water. Cartamon obtained by adding acidic solution to carthamin red shows the original hue of safflower. In this study, the condition of extraction with bean stem ash solution and dyeing behavior of carthamon in safflower were examined by using the traditional dyeing method. The relationship between the dye-uptake(K/S) of silk and ramie fabric and the various extractions and dyeing conditions was investigated.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.10 no.3
• /
• pp.173-180
• /
• 2008

Cotton, wool, cotton/wool blended (80:20) and tencel fabrics were treated with low temperature oxygen plasma, enzymes (cellulase or protease), or oxygen plasma-enzyme and they were examined for dyeing and handling properties for environment friendly finishing. The appropriate conditions for cellulase treatment were enzyme concentration of 3g/l, pH of 5, and $60^{\circ}C$ for one hour, and for protease treatment were enzyme concentration of 4g/l, pH of 8, and $60^{\circ}C$ for one hour. The equilibrium uptake of a direct dye on cotton changed with plasma treatment and plasma-cellulase treatment, and the rate of dyeing slightly decreased. When wool was dyed with acid dye, the equilibrium dye uptake did not change with plasma, protease treatment nor plasma-protease treatment, however, the rate of dyeing had increased with plasma-protease treatment. From these results, it is assumed that plasma attacks the surface of the fiber, and enzyme mainly affects the inner part of the fiber. Plasma treatment did not affect mechanical properties related to the handling of fabrics. The handling test showed increased extension at maxmum load(EM), tensile energy(WT) with decreased tensile resilience (RT), and the fabrics became softer but resilience decreased slightly with enzyme treatment. The bending recidity(B), hysteresis of bending moment(2HB), and hysteresis of shear force at five degrees(2HG5) decreased, however, shear stiffness(G) increased. I knew the plasma pre-treatment made fabrics softer with lower koshi(stiffness). The handling of plasma pre-treated fabrics was better than that of enzyme-treated fabrics. When we pre-treated fabrics, the handling test showed decreased coefficient of friction(MIU), geometrical roughness(SMD), while the surface of fabrics became smoother and numeri increased. Even though compression resilience(RC) increased, fukurami(bulky property) and compressive elasticity, decreased due to the linearity of compression-thickness curve(LC) and compression energy(WC).

• Korean Journal of Human Ecology
• /
• v.24 no.6
• /
• pp.859-871
• /
• 2015

The purpose of this study is to examine the influence of the pigment characteristic and changes in dying conditions on the dying properties by extracting Chelidonium majus var. asiaticum using distilled water and ethanol as solvents. Changes in dying conditions include variations in dye concentrations, dyeing temperatures and time on dye uptake, and K/S Value was compared according to these changes. Additionally, color changes were observed through mordant. Ultraviolet-visible spectrum was used to investigate the pigment characteristic, and as a result, tannin was identified in distilled-water-extract, whereas berberine and chlorophyll were identified in ethanol-extract. In FT-IR analysis, tannin in distilled-water-extract was verified as hydrolyzable tannin. For ethanol extract, chlorophyll was verified through absorption band of C-H, which is aliphatic spectrum around $2920cm^{-1}$ and $2850cm^{-1}$. From GC/MS analysis, oil components as well as terpine compounds were detected in ethanol-extract, and this, in turn, brings expectation regarding functionality. When dying in silk, dye uptake increased as concentration of the extract increased, and the optimum dyeing temperature and time were $40^{\circ}C$ and 60 minutes respectively. Dyed fabrics' colors were all basically Y-series colors, and adjustment in brightness and revelation of khaki color were also available depending on the type of the mordant. Color fastness, except for washing fastness, was good in silk dyed with distilled-water-extract. Thus, it can be concluded that by selecting the right extracting method and by doing proper dyeing and mordant according to the needs, these dyed fabrics can be used as eco-friendly, functional clothing material.

• Textile Coloration and Finishing
• /
• v.5 no.4
• /
• pp.67-78
• /
• 1993

In one bath dyeing system of silk/PET fiber blend fabric with acid/disperse dyes, adsorption behavior of disperse dyes and acid dyes on silk and PET fabrics were examined. In the dyeing of PET with C.I.Disperse Red 19(Red 19) and C.I.Disperse Red 60(Red 60) at 10$0^{\circ}C$(carrier dyeing) and 13$0^{\circ}C$, dye uptake with Red 60 was higher than that with Red 19. When the silk/PET dyed with Red 19 and Red 60 at 10$0^{\circ}C$(carrier dyeing) and 13$0^{\circ}C$, dye uptake on PET was influenced by affinity of the dye to the silk fabric dyed together. When the silk/PET dyed with Blue 80/Red 19 and Blue 80/Red 60 at 10$0^{\circ}C$(carrier dyeing) and 13$0^{\circ}C$ for 60 minutes, color of PET dyed with Red 19 and Red 60 was little influenced by Blue 80 but silk dyed with Blue 80 was influenced. Interrelation of K/S value and Munsell value was scarcely any but showed the change tendency of K/S value.

• KSBB Journal
• /
• v.29 no.5
• /
• pp.328-335
• /
• 2014

Vehicle toxicity is one of the main obstacles for intracellular delivery of bioactive compounds. Silk fibroin is a natural polymer proven to have high biocompatibility since being used as suture material. In this report, fibroin microspheres were prepared without any chemical modification or cross-linking not to affect its biocompatibility. The microspheres were taken up by more than 90% of 3T3 cells. Cellular uptake continued after medium replenishment with a different-colored fluorescent microsphere, suggesting that simultaneous ingestion and exocytosis occurred. Cellular uptake of fibroin microspheres did not affect cell viability. Intracellular trafficking of the microspheres using lysosome-specific fluorescent dye revealed that fibroin microspheres were localized both in the cytoplasm and in the lysosome. Accordingly, fibroin microspheres can be a potential vehicle for intracytoplasmic delivery of large cargos, such as mixtures of proteins, nutrients or artificial organelles.

• Textile Coloration and Finishing
• /
• v.13 no.3
• /
• pp.172-179
• /
• 2001

In order to improve dye uptime and wash fastness on dyeing of cotton fabrics with Amur cork tree, twitter ionic groups, acid groups, hydrophobic groups or cross linkage were introduced into cotton fabrics. Results obtained were as follows, 1 The optimum modification of cotton fabrics was carbosy methylation in the water solution containing 15% sodium chloroacetate and 15% sodium hydroxide and then introducing hydrophobic groups by treating in the solution containing $30m\ell$ DMSO and $3m\ell$ 2,4-TDI 2. Numbers of carbon, diisocyanate group than monoisocyanate group and aromatic compound than aliphatic compound in introduced hydrophobic groups were effective. 3. The dye uptake and wash fastness wore enhanced significantly by treating only with 2,4-TDI. 4. The wash fastness seems to correlate to the degree of swelling of the fabric during washing and also depend on the Interaction between dyes and acid groups as well as hydrophobic groups.

• Textile Coloration and Finishing
• /
• v.7 no.1
• /
• pp.72-79
• /
• 1995

The effect of copper sulfate/thiourea on the diffusion and the dye exhaustion of two dyes, C. I. Acid Orange 7 and C. I. Food Yellow 3 in nylon 6 fiber has been studied. The results obtained from the experimetal are as follows : 1) Copper sulfate reacted with thiourea at constant temperature and then generated the colorless trasparent coordination compound, and then combinated end group of carboxyl of nylon 6 fiber. 2) The coordination compound [$Cu_{2}$($TU_{6}$)] ($(SO_{4})_2$) is conducted at pH 5-6 in solution intensity and repulsed the sulfonic acid group of dyes, and therefore the diffusion of dyes is restraint. 3) Dye uptake and diffusion coefficient were decreased in the order of untreated > copper sulfate/thiourea-treated > tannin-treated.