• Current Research on Agriculture and Life Sciences
• /
• v.16
• /
• pp.1-14
• /
• 1998

As a result of the execution of the import liberalization and local autonomy with WTO system launching, centralized rural extension service converted to localized rural extension service. This advent of globalization and localization era affects our over all agricultural condition, moreover the duty and role of rural extension organization which take complete of rural extension, is compelled to diversified and specified technology. In this study, first we will investigate the change of agricultural, rural community, and local rural extension service in globalization and localization era. Second we will analyze the confronted problems of local rural extension service. With this study's outcome for basis, we will present new role and direction of local rural extension service which can contribute to local agricultural development.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.271-279
• /
• 2008

In this paper, we investigate interference between short-range radiocommunication devices(SRDs) with frequency hopping spread spectrum(FHSS) and direct sequence spread spectrum(DSSS) methods when they are in the same frequency bands. In order to analyze interference from unwanted emission of SRD with DSSS to that of FHSS, Monte-carlo(MC) simulation method is employed and interference probabilities are calculated. We simulate interference scenarios in accordance with several duty cycles and bandwidths. It is also assumed that the propagation model is free space. The effect of distance between interfering transmitter and victim receiver is analyzed and bit error rate(BER) is simulated. From the interference analysis results, it is shown that duty cycle affects compatibility more than band-width does. Also, we can make sure of the separation distance which satisfies BER criterion when there are only one interfering transmitter and multiple interfering transmitters.

• International Journal of Automotive Technology
• /
• v.6 no.3
• /
• pp.269-275
• /
• 2005

The engine cooling system for a medium duty V6, 4.5 L diesel engine was modeled with a commercial code, GT-Cool in order to investigate the effect of controllable electric pump on the cooling performance and the fuel economy. The simulation results of the cooling system model with mechanical coolant pump were validated with experimental data. Two different types of electric pumps were implemented into the cooling system model and PID control for electric pump operation was incorporated into the simulation study. Based on the simulation result with electric pump, conventional thermostat hysteresis was modified to reduce pump operation for additional improvement of fuel economy, and then the benefit of electric pumps with modified thermostat hysteresis on fuel economy was demonstrated with the simulation. The predicted result indicates that the cooling system with electric pump and modified thermostat hysteresis can reduce pump power consumption by more than $99\%$ during the FTP 74 driving cycle.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.5
• /
• pp.37-42
• /
• 2003

This research was carried on an 8100cc turbo-charged heavy duty diesel in the application of a cooled-EGR. Exhaust and intake manifold were modified and an electronically controlled EGR was installed in order to investigate engine performance and exhausted emission characteristics. High pressure route was designed in the compact form on the purpose of practicability in this cooled-EGR system, which constitutes a venturi tube to maintain pressure difference between exhaust manifold and compressor, an EGR cooler, an EGR valve and a solenoid valve.

• Korean Journal of Community Nutrition
• /
• v.4 no.1
• /
• pp.83-94
• /
• 1999

This study was carried out to investigate the general characteristics of public health nutritionists, the current status of nutrition services operation, the recognition about nutrition services of public health center related man power, the job satisfaction and self-assessment and the need for a retraining course of public health nutritionists. The subjects were 58 public health nutritionists who responded to the questionnaire distributed at the annual retraining program in 1998. The results of this study are summarized as follows. 1) 46.5% of the nutritionists were 26-30 years old, 62.1% were 4 year university graduates 74.1% were food and nutrition majors and 51.7% were daily workers. 2) Among the public health center-related manpower, the recognition about nutrition services was the highest for the manager of family health section, followed by the head of public health centers, and then the general nurse in public health centers. 3) The ranking of the reasons for job satisfaction of the public health nutritionists was, relationship with colleagues(3.84), inhabitants response after nutrition counselling(3.53), specialized value realization/conviction about duty(3.35), contents of the work(3.10), value achievement(3.08), self achievement/development(3.00), self discretion(2.92), participation in policy decisions(2.90), work load(2.75), chance of retraining and acquisition of new information(2.73), working environment(2.69), supervisio $n^port by superiors(2.67), salary(2.38), supply of necessary education material, technique(2.37), and budget security(2.22). 4) The satisfaction of the inhabitant's responses after nutrition counseling was the highest among the 4 year university graduates(p<0.05), the satisfaction of the specialized value realization/conviction about duty was the highest among the nutritionists 26-30 years old(p<0.05). Food and nutrition majors(p<0.05) and those having worked less than 3-5years at public health centers also showed much satisfaction(p<0.05). Satisfaction with the salary was the lowest among the food and nutrition majors(p<0.01) and daily workers(p<0.001). The satisfaction with the participation in policy decisions was the lowest among the daily workers(p<0.01). 5) The ranking for the level of self-assessment were, nutrition and dietetic practice(2.92), communication(2.80), management(2.77), public health science and practice(2.66)(p<0.01). The general characteristics such as the level of education, major, employment condition, current public health center's tenure, and charge experience of the nutrition guidance work were not significantly related to self-assessment except the management part(p<0.05). The higher the satisfaction of specialized value realization/conviction about the duty, the better the total score on the self-assessment(p<0.05)..

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.2
• /
• pp.133-141
• /
• 2011

The effect of payload on fuel consumption and emission of light duty freight truck during acceleration driving has been analyzed. Running tests were carried out with various payload conditions on chassis dynamometer. A typical driving pattern for urban cities was used. Real time emission measurement systems for gaseous and soot emission were utilized to investigate the real time dynamic of fuel use and exhaust emissions. It was observed that fuel use and pollutant emissions were increased as payload was increased. Under the same payload condition, the increased amount of acceleration driving is much higher than that of steady state driving. The results demonstrated the advantages of eco-driving, which is an environmentally friendly driving manner, could be emphasized in heavier payload condition. Inertial tractive power was introduced for considering the parameters affecting emission during acceleration driving, which are speed, acceleration and payload. Fuel use and emission in various driving conditions were expressed as functions of inertial tractive power. The estimated result by these functions well predicted measured result within 10 % deviation.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.2 s.95
• /
• pp.183-193
• /
• 1999

In the previous study, a module-type vibration analysis system using modular approach is developed for the purpose of analyzing the torsional vibration of vehicle driveline. In the present paper, the system is utilized to investigate the torsional vibration of the driveline of a middle duty truck. The driveline with driving condition is modeled and the torsional vibration response is simulated. The resonance 45Hz is found at engine speed 900rpm and the resultant vibration is very high. It shows favorable agreements with reference data. The effects of parameter change on torsional vibration are also investigated, so it is clarified that clutch characteristics, axle shaft stiffness are very influential on reduction of vibratio. So the countermeasure is proposed for the clutch characteristics. The reduction of torsonal vibration by 8rad/sec is obtained.

• Tribology and Lubricants
• /
• v.14 no.1
• /
• pp.45-53
• /
• 1998

Friction and wear test for two kinds of Cu-based sintered metallic friction material against cast iron disk was carried out by plate-on-disk type friction and wear tester to investigate the friction and wear characteristics of brake system in severe condition. In this experimental study, the counter specimen was cast iron which is being used generally in brakes of heavy duty equipments. Test friction materials were A type which was manufactured by foreign company and B type by domestic company. Friction coefficient and wear volume were measured and compared with each other. The experiment was performed under room temperature. The worn surface of cast iron disk and friction material were observed by scanning electron microscope. The temperature of surface of disk was measured continuously by the non-contacting thermometer. It was found that A type friction material had stable friction coefficient over the wide range of sliding condition, but B type friction material had unstable friction coefficient and lower value of 0.2 under the severe sliding condition.

• Journal of IKEEE
• /
• v.2 no.2 s.3
• /
• pp.255-262
• /
• 1998

The neural network can roughly be classified as the specialized control, indirect control and general schemes. Neural network is adopted for MPPT of solar array. And back propagation algorithm also is used to train neural network controller. We investigate the possibilities of $P_{max}$ control using the neural networks, and then we also examine about operating the solar cell at an optimal voltage comprise of temperature compensated voltage with boost converter. Proposed boost converter of MPPT system is studied by simulation and is implemented by using a microprocessor(80c196kc) which controls duty ratio of the boost converter.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.8
• /
• pp.146-154
• /
• 1997

Solenoid-folw control type ABS is used with a 'dump and reapply' pressure control arrangement instead of using 2/2 (normal open/close) solenoid valves in convensional systems(sol. -sol. control type), a flow control valve is used which replaces the (no) inlet valve. The flow control valve controls fluid flow providing a nearly constant reapply rate( .theta. ) after the dump plase of ABS operation. In this study, to investigate a characteristics of brake pressure by PWM control, test rig was consisted of ABS hydraulic modulator, digital controller, pneumatic power supply and brake master cylinder. For comparison with experi- mental results, system modelling and computer simulation were performed. As a result, experiment results showed fairly agreement with the simulation. Also, it is shown that the pressure gradient (tan .theta. ) is affected by pressure, frequency, duty ratio and expressed with an exponential funtion.